A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

LAMOST恒星光谱巡天与银河系恒星晕研究

星系的形成和演化问题是当今天体物理的前沿和核心。由于身居其中,而且可以对单个的恒星进行仔细的观测,银河系因此成为了研究星系的形成和演化乃至宇宙学的一个极重要样本。银河系的晕(包括恒星晕和暗物质晕)被证实具有非常复杂的结构,其中所蕴藏的信息使人们有可能揭示银河系的结构、形成和丰富的演化历史,其中的一些特殊天体可以用来探求银河系中央黑洞等当下天体物理的热点问题。LAMOST银河系恒星低分辨光谱巡天是迄今为止最大的同类观测项目,其形成的数据库非常适宜人们开展许多银河系结构和演化方面的工作。文章介绍了LAMOST银河系巡天在银晕和相关结构上正在开展的研究工作,并展示了一些早期的科学研究成果。     

HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.     

思维导图在结构化学课程教学中的应用与探索*

结合结构化学学科的自身特点以及学生对该学科的认识,探索用思维导图方法辅助结构化学的教学过程,将思维导图应用于结构化学教学中从而有助于学生形成逻辑严密、有机统一的量子理论知识结构体系,并且通过系统的调查问卷分析学生在学习过程中对思维导图的应用情况。     

Optimization strategies for radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetraflouroethene) film using Box-Behnken design

The radiation induced grafting of 4-vinylpyridine (4-VP) onto poly(ethylene-co-tetrafluoroethene) (ETFE) was optimized using the Box-Behnken factorial design available in the response surface method (RSM). The optimized grafting parameters; absorbed dose, monomer concentration, grafting time and reaction temperature were varied in four levels to quantify their effect on the grafting yield (GY). The validity of the statistical model was supported by the small deviation between the predicted (GY=61%) and experimental (GY=57%) values. The optimum conditions for enhancing GY were determined at the following values: monomer concentration of 48 vol%, absorbed dose of 64 kGy, reaction time of 4 h and temperature of 68 °C. A comparison was made between the optimization model developed for the present grafting system and that for grafting of 1-vinylimidazole (1-VIm) onto ETFE to confirm the validly and reliability of the Box-Behnken for the optimization of various radiation induced grafting reactions. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD) were used to investigate the properties of the obtained films and provide evidence for grafting.     

Investigation of the limitations of saturated fractional factorial experimental designs,with confounding effects for an HPLC ruggedness test

Summary Recently much attention has been directed to the validation of analytical methods. The level of validation will depend on the method application. If a method is developed for general use, for instance by different analysts, instruments or laboratories, then the effect of these changes need evaluation. This is normally referred to as ruggedness testing, where the limitations of the method to changes in the specified conditions are examined.This paper examines the use of Plackett-Burman fractional factorial experiment designs for ruggedness testing in high performance liquid chromatography (HPLC). The ability of these designs to identify confounding effects is applied to the stability indicating analysis of Salbutamol and its major degradation product, AH4045. The results show that confounding effects, proving extremely pertinent to HPLC, can be identified.The assay proved rugged to most tested changes although not to the use of column packing material from different manufacturers.     

Highly sensitive ion preconcentration method based on flow sorbent extraction using multiwall carbon nanotubes

In this work a solid phase on-line uranium ion preconcentration system coupled with spectrophotometry has been developed. The method is based on uranyl ion preconcentration at pH 3.75 onto multiwall carbon nanotubes treated with HNO₃. After preconcentration, the uranyl ions are eluted with 0.32?mol?L^?1HCl followed by reaction with 3,6-bis[(2-arsonophenyl)-azo]-4,5-dihydroxy-2,7-naphthalendisulfonic acid 0.08%[w/v] (Arsenazo III), which had maximum monitored absorbance of 650?nm. Effects of the pertinent experimental parameters on the system were investigated by means of 2^6?2 fractional factorial design, while optimization was carried out using the Doehlert matrix. Under optimized conditions, detection and quantification limits were found to be 0.21 and 0.7?µg?L^?1, respectively. The analytical curve ranged from 5 to 150?µg?L^?1 (r?=?0.998), while the relative standard deviations (RSD) were 3.27 and 2.56% for the respective uranium concentrations of 10 and 100?µg?L^?1 (n?=?10). The features obtained for the on-line preconcentration system were: preconcentration factor of 228, concentration efficiency of 57?min^?1, consumption index of 0.13?mL and sample throughput of 15?h^?1. In order to assess the accuracy of the proposed method, addition and recovery studies were carried out on spring water samples from different sources and synthetic seawater with satisfactory results ranging from 94.85 up to 103.65%.     

Development,stability-indicating assessment,and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 μm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 μl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.     

自掺杂磺酸化聚苯胺之最优化实验设计(英文)

应用实验设计法包括部分析因设计与中心组合设计,优化自掺杂磺酸化聚苯胺的导电性.部分析因设计发现,需用低温(4℃)、短反应时间(1 h)和少量发烟硫酸(10 mL)等实验条件进行磺酸化反应才能得到好的导电性(ca.127 mS.cm-1);中心组合设计与确认实验表明,其最佳导电性(ca.141 mS/cm)的磺酸化条件是4℃、75 m in反应时间以及8 mL 30%的发烟硫酸.应用傅立叶变换红外光谱(FTIR)、四探针与X光光电子能谱等分析制备的材料.此外,发现磺酸化速率与程度与聚合反应时所使用的酸有关.     

Application of the fractional factorial design in multiple W/O/W emulsions

In presented research, multiple W/O/W emulsions were developed by using experimental design method. A 24-1 fractional factorial design was performed by varying the following input parameters: primary polymeric emulsifier (PEG 30-dipolyhydroxystearate) concentration (0.8% and 2.4%), secondary polymeric emulsifier (Poloxamer 407) concentration (0.8% and 1.2%), electrolyte magnesium sulfate heptahydrate (0.08% and 0.4%) and electrolyte sodium chloride (0.08% and 0.4%). Multiple emulsions were prepared by a two-step emulsification process. Obtained emulsions were characterized with rheological measurements, conductivity and centrifugation tests. Factorial analysis revealed that the concentration of the primary emulsifier was the predominant factor influencing the phase separation, conductivity and maximal apparent viscosity. Additionally, electrolyte magnesium sulfate heptahydrate was more efficient in stabilizing these systems, compared to sodium chloride. The applied fractional factorial design method enabled determination of the optimal concentrations of the primary and secondary emulsifier, as well as the concentration of electrolytes, in order to obtain W/O/W emulsions with desired maximal apparent viscosities, low values of conductivity and without phase separation after centrifugation.