LLDPE/纳米SiO_2复合材料的力学性能和光学性能研究

采用熔融共混方法制备了LLDPE 纳米SiO2 复合材料 ,并对该体系的力学性能和光学性能进行了系统研究 .结果表明 ,随着纳米SiO2 的加入 ,复合材料的弹性模量显著提高 ,冲击强度与拉伸强度呈峰形变化 ,且均在SiO2 含量为 3phr左右达到最大值 .加入少量的纳米SiO2 后 ,复合材料薄膜对长波红外线 (7～ 1 1 μm)的吸收能力较LLDPE膜有了显著提高 ,透光率略有下降但雾度提高 ,透光质量得到改善 .同时表明 ,纳米SiO2 的表面处理方法对膜的光学性能有显著影响     

Pt/Al2O3蜂窝状催化剂上NO选择性催化还原反应动力学研究

采用多次涂层和浸渍法制备了蜂窝状Pt/Al2O3催化剂，并在高空速和大气体流量条件下对无梯度循环式反应器和积分反应器上催化剂的活性进行了比较。同时采用循环式反应器对动力学数据进行了测定。根据Langmuir-Hinshelwood模型和实验结果，推测了NO-C3H6-O2体系的SCR反应机理，并导出了NO和C3H6反应速率的数学表达式。据此所计算的理论模拟值能够与实验值很好地吻合。实验结果表明，氧气浓度对NO和C3H6的反应速率有明显的影响，二者均随着氧浓度c (O2)的增加达到峰值，再增加氧气浓度时，C3H6的反应速率r(C3H6)保持不变，而NO反应速率r (NO)却下降，而且下降的程度随着温度的升高而加剧。同时，随着氧气浓度增加，r (NO)达到最大值时的温度亦随之下降。     

气相分子吸收光谱法测定地下水中亚硝酸盐氮、氨氮、硝酸盐氮

采用气相分子吸收光谱法测定地下水中的亚硝酸盐氮(NO2^-)、氨氮(NH4^+)、硝酸盐氮(NO3^-)。考察NO2^-,NH4^+和NO3^-测定时的相互干扰,并给出了相应的消除方法。研究结果表明,测定NO2^-时,NH4^+和NO3^-无干扰;NO2^-对测定NH4^+和NO3^-产生干扰,可分别采用分段法和加入2滴10%氨基磺酸溶液的方法消除干扰;对于不含NO2^-或NO2-含量不高的地下水样品,可简化操作步骤直接测定NO3^-。该方法测定结果的相对标准偏差为0.73%~2.74%(n=12),样品加标回收率为97.67%~100.28%。所用检测仪器具有流动注射、自动进样及在线绘制标准曲线的功能,简化了标准方法中的样品前处理过程,减少了样品的损失,实现了自动化分析,大幅提高了检测结果的准确度和工作效率。     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Differentiation of Boc- alpha,beta- and beta,alpha-peptides and a pair of diastereomeric beta,alpha-dipeptides by positive and negative ion electrospray tandem mass spectrometry (ESI-MS/MS)

Positive and negative ion electrospray ionization (ESI) tandem mass spectral study of a new series of hybrid peptides, viz, BocN-alpha,beta-peptides and BocN-beta,alpha-peptides, synthesized from C-linked carbo-beta3-amino acids [Caa (S)] and L-Ala has been carried out. The alpha,beta-peptides have been differentiated from beta,alpha-peptides by the collision-induced dissociation (CID) of [M + H]+ and [M - H]- ions in positive and negative ion ESI-MS respectively. The fragment ion [M + H - C(CH3)3 + H]+ formed from [M + H]+ ions by the loss of 2-methyl-prop-2-ene in alpha,beta-peptides with L-Ala at the N-terminus is insignificant or totally absent for beta,alpha-peptides which have the Caa (S) at N-terminus. The fragment ion [M - H-C(CH3)3OH - HNCO]- formed from [M - H]- of beta,alpha-peptide acids is totally absent for alpha,beta-peptide acids. This has been attributed to the absence of the beta-methylene group in alpha,beta-peptides, and the participation of the beta-methylene group in the loss of HNCO in beta,alpha-peptide acids is confirmed by the deuteration experiments. The CID of [M + H-Boc + H]+ ions of these peptides also produce characteristic fragmentation. In the CID spectra of alpha,beta-peptides, the b(n)+ ions and the resulting y(n)+ ions occur at a mass difference of 243 and 71 Da corresponding to the successive losses of Caa and L-Ala, whereas a mass difference of 71 and 243 Da is observed for beta,alpha-peptides. In contrast to the CID of protonated peptides, the CID of [M - H]- ions of the alpha,beta- and beta,alpha-peptide acids do not give b(n)- ions and show abundant z(n) (-) ions. Further, a pair of diastereomeric dipeptide esters and acids have been distinguished by the CID of [M + H]+ ions. The loss of 2-methyl-prop-2-ene is more pronounced for Boc-NH-Caa(R)-D-Ala-OCH3 (21) and Boc-NH-Caa(R)-D-Ala-OH (23) with Caa (R) at the N-terminus, whereas it is totally absent for Boc-NH-Caa (S)-D-Ala-OCH3 (22) and Boc-NH-Caa(S)-D-Ala-OH (24) peptides, which have Caa (S) at the N-terminus. Thus, on the basis of our previous and present studies, we propose that the CID of [M + H]+ ions provides a simple and useful method for distinguishing the configuration of Caa (S or R) at the N-terminus of BocN-carbo beta,alpha- and beta,beta-dipeptides.     

Ein neues Kupfercobaltboratoxid mit isolierten B2O5-Baugruppen: Cu2Co(B2O5)O

On a New Copper Cobalt Borate Oxide with Isolated B₂O₅ Units: Cu₂Co(B₂O₅)O Single crystals of a new compound with the empirical formula Cu₂CoB₂O₆ were obtained by using a B₂O₃ flux technique. X-ray single crystal technique led to a new structure type. Cu₂CoB₂O₆ crystallizes monoclinic, space group C-P2₁/c (No. 14); a = 3.2250(6); b = 14.847(1); c = 9.1171(6) Å; β = 93.67°; Z = 4. All metal sites are octahedrally coordinated and form a two dimensional framework consisting of edge sharing octahedra ribbons. In addition one observes isolated B₂O₅-units and oxygen which is not coordinated to boron. The far relation to the crystal structure of the mineral Warwickite is illustrated.     

New approach to nonracemic 1-alkylamino-3-aryloxypropan-2-ols belonging to β-blockers via cyclic sulfites

Nonracemic -blockers, viz., (S)-propranolol and (S)-timolol, were prepared from (S)-glycidol in three steps consisting in the reaction with SOCl₂ followed by the reaction of the resulting (4S)-4-chloromethyl-2-oxo-1,3,2-dioxathiolanes with the corresponding phenol and the final cleavage of (4R)-aryloxymethyl sulfites under the action of amines in DMF.     

SUPERCRITICAL-PHASE PROCESS FOR SELECTIVE SYNTHESIS OF HEAVIER HYDROCARBONS FROM SYNGAS OVER ARu/Al_2O_3 CATALYST

在Ｒｕ／Ａｌ２Ｏ３催化剂上进行了超临界条件下的固定床费托合成。研究了催化剂孔尺寸、α－Ｃ１４烯共进料和反应温度对费托合成产物分布的影响     

Addition of diazocyclopropane generatedin situ to vinyl bromide and chemical transformations of the resulting 5-bromospiro(1-pyrazoline-3,1′-cyclopropane)

The reaction of diazocyclopropane generatedin situ with vinyl bromide occurs as regioselective 1,3-dipolar cycloaddition to give 5-bromospiro(1-pyrazoline-3,1′-cyclopropane) in ∼60% yield. Reactions of the latter with nucleophilic reagents, which can occur both with retention and opening of the cyclopropane ring, were studied. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 688–690, April 1998.