激光加工设备的通讯技术分析

通讯技术实际上是设备与设备之间的互通互联.随着信息化的发展,利用高科技产物--以激光为能源的设备已经产生并逐渐成熟.传统的激光设备通讯方式主要采用并行接口,而随着技术的增强,新的通讯技术得到了广泛应用.本文结合激光设备的特点,对几种常见通讯接口技术加以阐述.     

Study of NiSi/Si Interface by Cross-Section Transmission Electron Microscopy

采用不同硅化工艺制备了NiSi薄膜并用剖面透射电镜(XTEM)对样品的NiSi/Si界面进行了研究.在未掺杂和掺杂(包括As和B)的硅衬底上通过物理溅射淀积Ni薄膜,经快速热处理过程(RTP)完成硅化反应.X射线衍射和喇曼散射谱分析表明在各种样品中都形成了NiSi.还研究了硅衬底掺杂和退火过程对NiSi/Si界面的影响.研究表明:使用一步RTP形成NiSi的硅化工艺,在未掺杂和掺As的硅衬底上,NiSi/Si界面较粗糙;而使用两步RTP形成NiSi所对应的NiSi/Si界面要比一步RTP的平坦得多.高分辨率XTEM分析表明,在所有样品中都形成了沿衬底硅〈111〉方向的轴延-NiSi薄膜中的一些特定晶面与衬底硅中的(111)面对准生长.同时讨论了轴延中的晶面失配问题.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

Ovalbumin at oil–water interfaces: Adsorption and emulsification

In this article, we study the adsorption of protein ovalbumin (OVA) at corn oil (CO), soybean oil (SBO), olive oil (OO), and water interfaces along with the emulsification of these oils in water. The dynamic interfacial tension (IFT) measurements show a reduction in IFT in the order SBO–water?～?CO–water?>?OO–water, with OVA adsorption being dominated by the free diffusion of OVA at the interfaces. CO–water, OO–water, and SBO–water emulsions cream with time. The cream phase consists of jammed closed-packed oil droplets due to depletion-induced inter-droplet attractions with higher G′ and G″ (～700?Pa) for emulsions with 1?wt% OVA.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Numerical investigation of impinging gas jets onto deformable liquid layers

Impinging jets over liquid surfaces are a common practice in the metallurgy and chemical industries. This paper presents a numerical study of the fluid dynamics involved in this kind of processes. URANS simulations are performed using the volume of fluid (VOF) method to deal with the multiphase physics. This unsteady approach with the appropriate computational domain allows resolution of the big eddies responsible for the low frequency phenomena. The solver we used is based on the finite volume method and turbulence is modelled with the realisable k-? model. Two different configurations belonging to the dimpling and splashing modes are under consideration. The results are compared with PIV and LeDaR experimental data previously obtained by the authors. Attention is focused on the surroundings of the impingement, where the interaction between jet and liquid film is much stronger. Finally, frequency analysis is carried out to study the flapping motion of the jet and cavity oscillations.     

Modification of palladium–copper thin film by reduced graphene oxide or platinum as catalyst for Suzuki–Miyaura reactions

This study describes the synthesis of PdCu, PdCu/reduced graphene oxide and PtPdCu nanoparticle thin films via a simple reduction of organometallic precursors including [PtCl₂(cod)] and [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene) complexes, in the presence of [Cu(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. The structure and morphology of the thin films were characterized using energy‐dispersive analysis of X‐rays, X‐ray diffraction and transmission electron microscopy techniques. Our studies show that all of these nanoparticles are suitable for the Suzuki–Miyaura coupling (SMC) reaction in water. PtPdCu and PdCu thin films showed higher catalytic activity compared to Pd thin film in the SMC reaction due to the appropriate interaction among palladium, platinum and copper metals.     

Phase field approach with anisotropic interface energy and interface stresses: Large strain formulation

A thermodynamically consistent, large-strain, multi-phase field approach (with consequent interface stresses) is generalized for the case with anisotropic interface (gradient) energy (e.g. an energy density that depends both on the magnitude and direction of the gradients in the phase fields). Such a generalization, if done in the “usual” manner, yields a theory that can be shown to be manifestly unphysical. These theories consider the gradient energy as anisotropic in the deformed configuration, and, due to this supposition, several fundamental contradictions arise. First, the Cauchy stress tensor is non-symmetric and, consequently, violates the moment of momentum principle, in essence the Herring (thermodynamic) torque is imparting an unphysical angular momentum to the system. In addition, this non-symmetric stress implies a violation of the principle of material objectivity. These problems in the formulation can be resolved by insisting that the gradient energy is an isotropic function of the gradient of the order parameters in the deformed configuration, but depends on the direction of the gradient of the order parameters (is anisotropic) in the undeformed configuration. We find that for a propagating nonequilibrium interface, the structural part of the interfacial Cauchy stress is symmetric and reduces to a biaxial tension with the magnitude equal to the temperature- and orientation-dependent interface energy. Ginzburg–Landau equations for the evolution of the order parameters and temperature evolution equation, as well as the boundary conditions for the order parameters are derived. Small strain simplifications are presented. Remarkably, this anisotropy yields a first order correction in the Ginzburg–Landau equation for small strains, which has been neglected in prior works. The next strain-related term is third order. For concreteness, specific orientation dependencies of the gradient energy coefficients are examined, using published molecular dynamics studies of cubic crystals. In order to consider a fully specified system, a typical sixth order polynomial phase field model is considered. Analytical solutions for the propagating interface and critical nucleus are found, accounting for the influence of the anisotropic gradient energy and elucidating the distribution of components of interface stresses. The orientation-dependence of the nonequilibrium interface energy is first suitably defined and explicitly determined analytically, and the associated width is also found. The developed formalism is applicable to melting/solidification and crystal-amorphous transformation and can be generalized for martensitic and diffusive phase transformations, twinning, fracture, and grain growth, for which interface energy depends on interface orientation of crystals from either side.