Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

基于运动矢量分布特征的半像素快速搜索算法

针对MPEG-4视频编码中半像素全搜索方法运算量较大的缺点,提出一种基于运动矢量分布特征的快速半像素运动矢量搜索算法。试验表明最佳半像素运动矢量的分布具有一定的规律,即大多数的运动矢量分布在水平或垂直两个共扼方向上。因此在满足一定条件的前提下水平和垂直方向上的运动矢量被优先搜索,其次搜索其余的点。仿真结果表明本算法可以使半像素平均搜索点数减少71%,而编码质量和码流长度并没有明显降低或增加。     

5-(对羧基苯偶氮)-8-羟基喹啉与钍的显色反应及应用

研究了钍与5-(对羧基苯偶氮)-8-羟基喹啉(5-CPAHQ)的显色反应条件:在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下,pH4.4-5.4缓冲介质中,形成稳定的橙红色络合物,最大吸收波长为490nm,ε=1.10×105L·mol-1·cm-1,钍在0-9μg/25mL范围内符合比尔定律。用TBP萃淋树脂分离,该方法可用于测定矿石中的微量钍。     

Chemoenzymatic synthesis of conduritol analogues

Several conduritol and conduramine analogues have been synthesized from β-substituted naphthalenes via a chemoenzymatic approach, in a high regio- and stereocontrolled way.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.