微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

Redox behavior of V/MgO catalyst in H2S wet oxidation at room temperature

The room temperature wet catalytic oxidation was conducted in a batch reactor with V/MgO catalyst. The XRD study of the catalyst used indicated that V/MgO could not only oxidize H2S to sulfur selectively, but also prevent the sulfidation of metal oxide effectively at the room temperature. The XPS study indicated that the H2S oxidation with V/MgO could proceed by a redox mechanism (V⁵⁺↔ V⁴⁺) and that V³⁺ formation (V⁴⁺→ V³⁺), was responsible for the deactivation of V/MgO. This revised version was published online in June 2006 with corrections to the Cover Date.     

Thin-layer chromatographic separation of serotonin from epinephrine and norepinephrine

A thin-layer chromatographic procedure is reported for the separation of serotonin from epinephrine and norepinephrine. The method involves the use of ethylenediaminetetraacetic acid-impregnated silica gel G plates and n-butanol-ethanol-acetic acid-water (8:2:1:3) as developer. Serotonin is well separated from both epinephrine and norepinephrine. Epinephrine and norepinephrine overlapped slightly but were both detectable. The procedure is thus applicable to the separation of all three biogenic amines in spite of the absence of an absolutely clear separation of epinephrine from norepinephrine.     

A theoretical study of electronic excited states of photosynthetic reaction center in Rhodopseudomonas viridis

The electronic singlet vertical excited states of photosynthetic reaction center (PSRC) in Rhodopseudomonas (Rps.) viridis were investigated by ZINDO and INDO/S methods. The effects of the interactions of pigment-pigment and pigment-protein on the electronic excitations were examined. The calculation results showed that the interactions of pigment-pigment and pigment-protein play an important role in reasonably assigning the experimental absorption and circular dichroism (CD) spectra of PSRC in Rps. virids. By comparing the theoretically computed excited states with the experimental absorption and CD spectra, satisfactory assignments of the experimental spectroscopic peaks were achieved.     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

A new phase in the Ag−O−S system

The investigations of reaction between Ag₂SO₄ and Ag₂S in air atmosphere have been carried. Results of DTA and X-ray phase powder diffraction of a reaction mixture have confirmed that in the Ag?O?S system exists a new phase. A formula of the phase is Ag₂SO₂.     

Tl2S: Re-Determination of Crystal Structure and Stereochemical Discussion

The crystal structure of synthetic carlinite, Tl₂S, was re-determined by single crystal and powder X-ray diffraction methods. The cell parameters obtained from Rietveld refinement are a=12.150(2) Å, c=18.190(4) Å, V=2325.5(7) ų. A single crystal data refinement proved Tl₂S crystallizing in the trigonal space group R3 with M=440.8gmol⁻¹, Z=27, R=0.076, and wR=0.145. The atomic arrangement found is that of a strongly deformed anti-CdI₂ type, but the deformation is clearly different from that given by previous workers. In the five crystallographically different STl₆ octahedra the S-Tl distances vary between 2.82 and 3.09Å, the Tl-Tl edges between 3.52 and 4.58Å. The common features of these octahedra are (i) each one with a definitely smaller vs larger Tl₃ face in trans-position, both faces parallel or sub-parallel (00.1), and (ii) each three shorter and longer S-Tl distances to the atoms of the larger and smaller Tl₃ faces, respectively. The Tl-Tl contacts between different Tl₂S sheets are on the average definitely shorter than the ones within the sheet and they can be smaller than the Tl-Tl contacts in the small Tl₃ faces of the STl₆ octahedra. The atomic arrangement indicates that the single electron pairs of the monovalent Tl atoms are not arranged all parallel to the z-axis, as one would expect for Tl₂S with an ideal anti-CdI₂ structure. The surrounding of the S atoms resembles that of one-third of the Cl atoms in yellow InCl. The absorbance of Tl₂S is very low at wave numbers approximately <9000 cm⁻¹.     

西印度蔗螟聚集信息素次要组份合成方法的改进

2-甲基-4-庚醇和2-甲基-4-辛醇是西印度蔗螟(Metamasiushemipterus)聚集信息素的次要组份，本文以天然产物(S)-亮氨酸为原料合成出了2-甲基-4-庚醇及2-甲基-4-辛醇的所有对映异构体，其关键步骤是由(2S)-4-甲基-1,2-戊二醇合成出(2S)和(2R)-4-甲基-1,2-环氧戊烷两种重要中间体，目标产物光学纯度可达95%以上。     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.