Assigning the ESI mass spectra of organometallic and coordination compounds

Electrospray ionization mass spectrometry (ESI‐MS) is a useful technique for solving organometallic and coordination chemistry characterization problems that are difficult to address using traditional methods. However, assigning the ESI mass spectra of such compounds can be challenging, and the considerations involved in doing so are quite different from assigning the mass spectra of purely organic samples. This is a tutorial article for organometallic/coordination chemists using ESI‐MS to analyze pure compounds or reaction mixtures. The fundamentals of assigning ESI mass spectra are discussed within the context of organometallic and coordination systems. The types of ions commonly observed by ESI‐MS are categorized and described. Finally, a step‐by‐step guide for the assignment of organometallic and coordination chemistry ESI mass spectra is provided along with two case studies.     

Determination of unbound prednisolone, prednisone and cortisol in human serum and saliva by on-line solid-phase extraction liquid chromatography tandem mass spectrometry and potential implications for drug monitoring of prednisolone and prednisone in saliva

Prednisolone (PLN) and prednisone (PN) are widely used glucocorticoids. Drug monitoring of PLN and PN is not routinely done owing to the need for multiple blood sampling and challenging measurement of unbound PLN and PN in blood. Here we present a robust method for quantification of cortisol, PLN and PN in serum, ultrafiltrate and saliva by on‐line solid‐phase extraction LC‐MS/MS. The method is linear for the three analytes over the range of 6–1400 nmol/L for serum and 2–450 nmol/L for ultrafiltrate and saliva. Within‐run precision of all three analytes was <10% and total precision was <15%. This method was applied to create time–concentration profiles of cortisol, PLN and PN after an oral dose of prednisolone in a healthy volunteer. Salivary levels of PLN correlated well with ultrafiltrate levels (p < 0.01), while this correlation was only marginal for PN (p = 0.052). The PN/PLN ratio was significantly higher in saliva than in ultrafiltrate and serum (p < 0.01). Addition sums of both metabolites in saliva showed excellent correlation with those of ultrafiltrate (p < 0.01). These findings have not been presented before and may have important implications for future studies concerning drug monitoring of PLN and PN in saliva. Copyright © 2011 John Wiley & Sons, Ltd.     

On‐line process monitoring of coffee roasting by resonant laser ionisation time‐of‐flight mass spectrometry: bridging the gap from industrial batch roasting to flavour formation inside an individual coffee bean

Resonance‐enhanced multiphoton ionisation time‐of‐flight mass spectrometry (REMPI‐TOFMS) enables the fast and sensitive on‐line monitoring of volatile organic compounds (VOC) formed during coffee roasting. On the one hand, REMPI‐TOFMS was applied to monitor roasting gases of an industrial roaster (1500 kg/h capacity), with the aim of determining the roast degree in real‐time from the transient chemical signature of VOCs. On the other hand, a previously developed μ‐probe sampling device was used to analyse roasting gases from individual coffee beans. The aim was to explore fundamental processes at the individual bean level and link these to phenomena at the batch level. The pioneering single‐bean experiments were conducted in two configurations: (1) VOCs formed inside a bean were sampled in situ, i.e. via a drilled μ‐hole, from the interior, using a μ‐probe (inside). (2) VOCs were sampled on‐line in close vicinity of a single coffee bean's surface (outside). The focus was on VOCs originating from hydrolysis and pyrolytic degradation of chlorogenic acids, like feruloyl quinic acid and caffeoyl quinic acid. The single bean experiments revealed interesting phenomena. First, differences in time–intensity profiles between inside versus outside (time shift of maximum) were observed and tentatively linked to the permeability of the bean's cell walls material. Second, sharp bursts of some VOCs were observed, while others did exhibit smooth release curves. It is believed that these reflect a direct observation of bean popping during roasting. Finally, discrimination between Coffea arabica and Coffea canephora was demonstrated based on high‐mass volatile markers, exclusively present in spectra of Coffea arabica. Copyright © 2013 John Wiley & Sons, Ltd.     

工业废水中微量铜（Ⅱ）和氰化物的流动注射光度分析

采用ＦＩＡ技术，以光度比色法为基础，建立了工业废水中微量Ｃｕ＾２＋和ＣＮ＾－的顺序自动分析方法和装置。其对二种离子的测定频率为６０样／ｈ，相对标准偏差＜１．０％，工作曲线的ｒ值≥０．９９９，各项分析技术指标均优于手工法操作。     

金属腐蚀监测的光波导传感方法研究

本文提出一种用于金属腐蚀监测的光波导传感方案 ,用金属膜层局部取代光波导的介质包层 ,构成腐蚀敏感膜 ,从而获取金属腐蚀信息 .依据波导理论选用 72 1比色皿上的石英玻璃作为光波导材料 ,利用电化学方法在波导材料内表面上形成Fe C合金腐蚀敏感膜 ,并用XRD、EDX等对膜层结构进行分析 .在电化学腐蚀膜的同时 ,用光学方法记录光波导输出光功率的变化 ,实验结果表明电化学方法与光学方法获取的腐蚀信息同步 ,证实了所提传感方案可行     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

用碘酸钾滴定法标定二氧化硫标准溶液

用KIO3滴定法标定SO2标准溶液,RSD≈0.10%,标定结果与标准法结果无显著性差异,相对误差<±0.3%。     

Styrene oxide DNA adducts: quantitative determination using <Superscript>31</Superscript>P monitoring

The reaction of styrene oxide, a potential carcinogen in humans, with DNA constituents has been used to develop an improved method for quantification of DNA adducts. To enable monitoring of DNA adducts caused by xenobiotics at physiological relevant levels, a robust, reliable and powerful method based on monitoring of phosphorus in nucleotides is described. An efficient enzymatic digestion step and a sample-preconcentration procedure are essential, and enable separation of alkylated nucleotides from the large excess of native nucleotides. The adducts are detected by means of the phosphorus signal measured at mass m/z=31 with an inductively-coupled-plasma mass spectrometer. Bis(4-nitrophenyl)phosphate (BNPP) serves as internal standard for quantification of the adducts. The absolute limit of detection, 45 fmol, corresponds to detection of three modified nucleotides among 10⁷ native nucleotides (the calculation is based on use of 50 g calf thymus DNA). An adduct formation ratio at the DNA of 3.6 adducts per 1000 nucleotides was measured, which is 75% lower than for reaction with monomeric 2-deoxy-nucleotides. In addition, a substantial amount of phosphate adducts were detected, but in DNA the rate of phosphate formation was lower than with monomeric nucleotides. Most probably these adducts escaped unnoticed when ³¹P-post-labelling was employed.     

微纳电化学传感界面的构建及其用于单细胞实时监测

细胞是生物体形态结构和生命活动的基本单位.常规检测群体细胞的方法往往会掩盖细胞间的个体差异,因此亟需发展高效的单细胞分析策略,深入研究细胞生命活动过程,揭示疾病发生发展机制,推动个体化诊疗.超微电化学传感器具有尺寸小、灵敏度高、时空分辨率高等特点,在单细胞实时动态监测方面发挥了非常重要的作用.目前,微纳电化学传感器在电...     

一种基于流动注射梯度技术识别异常峰及校正的方法

基于流动注射梯度信息提出了一种利用梯度比均值进行定量的校正方法。方法具有在线自动判别和修复异常峰并自行校正的功能，和通用的标准系列定量方法相比，两者测定精度相当。但本文提出的方法抗干扰能力明显优于后者，可适用于在线过程监测。