毛细管电色谱中双电层叠加的研究

通过流动相中电解质浓度对毛细管电色谱柱效能的流动相平均线速度的影响，研究了ＣＥＣ中双电层叠加现象。提出选择合适电解质组成的浓度及在制备色谱柱过程中避免细小和破碎的固定相颗粒进入柱中，以有效地减小双电层叠加作用。     

Isoperichoric focusing field-flow fractionation and thin layer isoperichoric focusing based on coupling of gradient generated by primary field with secondary field action: general principles and performances

The primary field forces can generate spatially oriented gradient of the effective property of a continuum or pseudo-continuum fluid (carrier liquid). When this gradient is coupled with the action of a secondary field of identical or different nature the isoperichoric focused zones of the dispersed species can appear. Consequently, they can be separated according to differences responding to the property gradient of the carrier liquid. This concept can be applied under static (non-flow) conditions in thin layer focusing as well as under dynamic conditions with the elution due to the carrier liquid flow in focusing field-flow fractionation. The gradient established by the action of the primary field and the concentration distribution of the isoperichoric focused zone formed by the coupled effect of the gradient and of the primary or secondary field are described theoretically. The rigorous relationship describing the shape of the focused zone is compared with the approximate solutions. The performances of the proposed principle were evaluated by model calculations. Potential experimental configurations considering the implementation of the static and dynamic conditions are discussed. The generalized isoperichoric focusing theory can be applied to describe the particular processes operating in analytical and preparative focusing separations of the particles of various, but especially of biological origin.     

金属基上以YSZ为过渡层的YBCO薄膜的微观结构

采用透射电子显微术（ＴＥＭ），研究了用磁控溅射技术在柔性金属基体上制备的、钇稳定的ＺｒＯ２（ＹＳＺ）为过镀层的ＹＢａ２Ｃｕ３Ｏ７－ｙ（ＹＢＣＯ）薄膜的横断面结构。所得ＹＢＣＯ膜的超导临界转变温度Ｔｃ为９１Ｋ，临界电流密度Ｊｃ＝２×１０３Ａ／ｃｍ２（７７Ｋ，０Ｔ）。基体为Ｎｉ基合金（ＨａｓｔｅｌｏｙＣ）。ＹＳＺ层为致密、均匀的细晶组织，约１２μｍ厚，具有织构取向，并与基体紧密连接。ＹＢＣＯ层的厚度不均匀，约５００ｎｍ；ＹＢＣＯ／ＹＳＺ界面有时连接较差，在该界面上有杂质出现，杂质有可能引发裂纹。     

Evaluation of the sputtering rate variation in SIMS ultra‐shallow depth profiling using multiple short‐period delta layers

We have developed multiple short‐period delta layers as a reference material for SIMS ultra‐shallow depth profiling. Boron nitride delta layers and silicon spacer layers were sputter‐deposited alternately, with a silicon spacer thickness of 1–5 nm. These delta‐doped layers were used to measure the sputtering rate change in the initial stage of oxygen ion bombardment. A significant variation of sputtering rate was observed in the initial 3 nm or less. The sputtering rate in the initial 3 nm was estimated to be about four times larger than the steady‐state value for 1000 eV oxygen ions. Copyright © 2003 John Wiley & Sons, Ltd.     

Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.     

Thin‐Layer Cyclic Voltammetric and Scanning Electrochemical Microscopic Study of Antioxidant Activity of Ascorbic Acid at Liquid/Liquid Interface

An electron transfer reaction between ascorbic acid (H₂A) in an aqueous solution and oxidizing agent in an organic solution immiscible with water has been studied by thin‐layer cyclic voltammetry (TLCV) for charge transfer at the interface between two immiscible electrolyte solutions (ITIES). As an antioxidant, H₂A provide electrons through the aqueous/organic interface to reduce Fc⁺ and the procedure has been proved to be a one electron process again. In this work, the first combination of TLCV and scanning electrochemical microscopy (SECM) was achieved and showed a reasonable agreement between the results from the two different approaches. Otherwise, lower concentration ratios Kr of aqueous to organic reactants was adopted, which is given as evidence to the proposed procedure of Barker.     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Quantification of Valerenic Acid in Valeriana jatamansi and Valeriana officinalis by HPTLC

A simple, rapid, cost-effective and accurate high performance thin layer chromatographic method has been developed for quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis which is one of the stable compounds of Valeriana officinalis and designated as a key marker compound. Valerenic acid makes substantial contribution to the sedative and spasmolytic activity of the essential oil and extract of Valeriana officinalis. Separation and quantification was achieved by HPTLC using ternary mobile phase of hexane: ethyl acetate: acetic acid (80:20:0.5 v/v) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent at 700 nm, in absorption-reflectance mode. The calibration curves were linear in the range of (500 ng–2.5 μg). This is the first HPTLC report for the identification and quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis.