纯整环并半环的半群结构

环并半环称为纯整环并半环, 若其加法幂等元集是一个带半环. 若纯整环并半环的加法幂等元集是一个T带半环, 称为$T$纯整环并半环. 研究了纯整环并半环以及一些$T$纯整环并半环的半群结构.     

矩形槽波导的模式图

本文用有限元法分析了矩形槽波导。对矩形波导的计算验证了我们的有限元程序是有效的。文中给出的矩形槽波导模式图有助于设计基于矩形槽波导的短毫米波和亚毫米波器件。     

Diffusioosmotic flow in rectangular microchannels

The diffusioosmosis of an electrolyte solution inside a uniformly charged rectangular channel at steady locally developed conditions is the subject of this study. Utilizing a finite element based numerical procedure, we try to estimate the errors incurred by modeling the actual rectangular geometry of typical microchannels as a slit. We demonstrate that the flow pattern and direction are generally dependent upon the width‐to‐height ratio of the channel. Such a finding, besides showing the ineffectiveness of the slit geometry in representing a rectangular channel of small aspect ratio, informs us of another mechanism of controlling the diffusioosmotic flow. Inspections of the mean velocity reveal that, although it drastically grows by increasing the aspect ratio at smaller values of this parameter, no significant change is observed when the aspect ratio is 5 or higher. The same trend is observed when EDL is shrunk and is considered as a basis for the introduction of a slip‐like velocity, similar to the concept of the Helmholtz–Smoluchowski electroosmotic velocity, which will be of high practical importance when dealing with a micronsized channel. Because of its significance, an expression is presented for this slip velocity utilizing the curve fitting of the results, assuming a typical Peclet number.     

Application of color structured light pattern to measurement of large out-of-plane deformation

Measurement of out-of-plane deformation is significant to understanding of the deflection mechanisms of the plate and tube structures.In this study,a new surface contouring technique with color structured light is applied to measure the out-of-plane deformation of structures with one-shot projection.Through color fringe recognizing,decoding and triangulation processing for the captured images corresponding to each deformation state,the feasibility of the method is testified by the measurement of elastic deflections of a flexible square plate,showing good agreement with those from the calibrated displacement driver.The plastic deformation of two alloy aluminum rectangular tubes is measured to show the technique application to surface topographic evaluation of the buckling structures with large displacements.     

Flow pattern based correlations of two-phase pressure drop in rectangular microchannels

Numerous pressure drop correlations for microchannels have been proposed; most of them can be classified as either a homogeneous flow model (HFM) or a separated flow model (SFM). However, the predictions of these correlations have not been compared directly because they were developed in experiments conducted under a range of conditions, including channel shape, the number of channels, channel material and the working fluid. In this study, single rectangular microchannels with different aspect ratios and hydraulic diameters were fabricated in a photosensitive glass. Adiabatic water-liquid and Nitrogen-gas two-phase flow experiments were conducted using liquid superficial velocities of 0.06–1.0 m/s, gas superficial velocities of 0.06–72 m/s and hydraulic diameters of 141, 143, 304, 322 and 490 μm. A pressure drop in microchannels was directly measured through embedded ports. The flow pattern was visualized using a high-speed camera and a long-distance microscope. A two-phase pressure drop in the microchannel was highly related to the flow pattern. Data were used to assess seven different HFM viscosity models and ten SFM correlations, and new correlations based on flow patterns were proposed for both HFMs and SFMs.     

Large eddy simulation of coherent structures in rectangular methane non-premixed flame

Large eddy simulation of a three-dimensional spatially developing transitional free methane non-premixed flame is performed. The solver of the governing equations is based upon a projection method. The Smagorinsky model is utilized for the turbulent subgrid scale terms. A global reaction mechanism is applied for the simulation of methane/air combustion. Simulation results clearly illustrate the coherent structure of the rectangular non-premixed flame, consisting of three distinct zones in the near field. Periodic characteristics of the coherent structures in the rectangular non-premixed flame are discussed. The predicted structure of the flame is in good agreement with the experimental results. Distributions of species concentrations across the flame surfaces are illustrated and typical flame structures in the far field are analyzed. Local mass fraction analysis and flow visualization indicate that the black spots of the flames are due to strong entrainment of oxygen into the central jet by streamwise vortices, and breaking up of the flame is caused by an enormous amount of entrainment of streamwise vortices as well as stretching of spanwise vortices at the bottom of the flame.     

APPROXIMATION OF MAXIMUM LIKELIHOOD ESTIMATOR FOR DIFFUSION PROCESSES FROM DISCRETE OBSERVATIONS

This paper is concerned with the approximation of the maximum likelihood estimator of parameter in the nonlinear drift coefficient of an Ito? stochastic differential equation. Trapezoidal rule of approximation and rectangular rule of approximation have been compared when the observations are made at regularly spaced discrete but dense time points.     

Axi symmetric 2D simulation and numerical heat transfer characteristics for the calibration furnace in a rectangular enclosure

This paper presents axi symmetric 2D numerical investigation of the spherical thermocouple calibration furnace in a rectangular enclosure. The focus is on the flow structure inside the Saturn (a hollow spherical cavity), external flow behavior due to annulus block heating and the surface temperature uniformity. Mesh sensitivity analysis is adopted to extract the mesh with minimum number of nodes but with fast convergent finite element solution. The basic strategy here is that temperature perturbation error at a single point instead of a single element contributed to the total perturbation error qualitatively remains the same. Agreement between numerical simulation results and the experiment results is good with a maximum temperature deviation 10 °C for the cavity temperature 400 °C. Finally, standard numerical temperature uncertainty due to variation in thermal conductivity is computed through the sensitivity coefficient using uncertainty analysis.     

A mixed method for free and forced vibration of rectangular plates

This paper presents a very first combined application of Ritz method and differential quadrature (DQ) method to vibration problem of rectangular plates. In this study, the spatial partial derivatives with respect to a coordinate direction are first discretized using the Ritz method. The resulting system of partial differential equations and the related boundary conditions are then discretized in strong form using the DQ method. The mixed method combines the simplicity of the Ritz method and high accuracy and efficiency of the DQ method. The results are obtained for various types of boundary conditions. Comparisons are made with existing analytical and numerical solutions in the literature. Numerical results prove that the present method is very suitable for the problem considered due to its simplicity, efficiency, and high accuracy.     

矩型坯连铸机二冷水控制模型的研究与应用

二次冷却是连铸生产中的重要控制部分,对铸坯质量起着非常重要的作用。由此,二冷水控制模型的研究与应用也显得尤为重要。本文主要针对莱铜矩型坯连铸机,对二冷水控制模型进行深入的分析与研究。