Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Non-destructive in situ determination of pigments in 15th century wall paintings by Raman microscopy

Raman microscopy has been applied to the study of 15th century wall paintings in a chapel of St. Orso Priory palace (Aosta, Italy) in view of their restoration. The use of a transportable instrument has made it possible to work non-destructively in situ without sampling. The main inorganic pigments used by the unknown artist, namely mercury sulphide, azurite, white lead, red and yellow ochre, carbon black and lead tin yellow type I have been identified, and the presence of organic substances and of some decay products (calcium sulphate and oxalate) has been observed.     

Vibrational Spectroscopic Studies on the Hofmann-dabn-Type Benzene Clathrates: M(1,4-diaminobutane)Ni(CN)4° 1.5C6H6 (M = Mn, Fe, Co, Ni or Cd)

IR spectra of M(1,4-diaminobutane)Ni(CN)4° 1.5C6H6 (M = Mn, Fe, or Co), and IR and Raman spectra of M(1,4-diaminobutane)Ni(CN)4° 1.5C6H6 (M = Ni or Cd) clathrates are reported. The spectral features suggest that the compounds are similar in structure to the Hofmann-dabn-type clathrates.     

Vibrational frequencies and structural determination of phosphirane

The normal mode frequencies and corresponding vibrational assignments of phosphirane in are examined theoretically using the GAUSSIAN 98 set of quantum chemistry codes. All normal modes were successfully assigned to one of nine types of motion (C–C stretch, P–C stretch C–H stretch, P–H stretch, CH₂ scissors, CH₂ wag, CH₂ rock, CH₂ twist, and P–H wag) predicted by a group theoretical analysis. Comparing the vibrational frequencies with IR and Raman spectra available in the literature, a set of scaling factors are derived. Predicted infrared and Raman intensities are reported.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

Anomalies of the partition coefficient and properties of crystals in the region of low concentrations of an isomorphous admixture. 1. Unusual decomposition of solid solutions of the NaCl—CdCl2 system

Solid solutions NaCl—CdCl₂ were studied in an interval of CdCl₂ concentrations of 0.05—3 mol.% by Raman spectroscopy. The molecular form Na₂CdCl₄ decomposes: Na₂CdCl₄ 2Na⁺ + Cd²⁺ + 2Cl₂ ^– + 2e^–; 2Na + 2e^– 2Na⁰. Free sodium atoms form color centers of crystal (F centers) in the region of jumpwise changing the partition coefficient of CdCl₂ in NaCl (K jump).     

Degradation in gain for a free electron laser amplifier due to electron momentum spread

A finite spread in axial momentum for the electron beam in a free electron laser amplifier is shown to decrease the small-signal gain. For millimeter and sub-millimeter wave amplifiers, where exponential growth dominates the gain, it is shown that the gain is approximately 3 db below that for a cold beam if the relative momentum spread (u/u)_1/2 = (G_o/248)^1/2 (_o/L), where G_o1 is the gain in db for the cold-beam case, _o is the magnetic wiggler period, and L is the amplifier length. Exact numerical examples are given for representative FEL amplifiers at 35 and 550 GHz.This research was sponsored by the U.S. Office of Naval Research, and by the U.S.-Israel Binational Science Foundation.     

Investigation of the Curing Mechanism in the GPTS/APTS Binder System

The acid catalyzed sol-gel reaction in the mixed binder system, 3-glycidoxypropyltrimethoxysilane (GPTS)/3-aminopropyltriethoxysilane (APTS) was investigated and one step and two step synthesis process were compared. Hydrolysis product was observed using the ¹H, ¹³C NMR and Raman spectra. Especially, based on the Raman spectra, epoxy ring opening was observed, varying the ratio of GPTS to APTS. The two step process made clear sol, while the one step process resulted in a milky suspension. According to the Raman spectra, the epoxy ring opening reaction kinetics proceeded slower in the two step process than one step process. Throughout the two step process, it was possible to apply the binder for the coating of substrate.     

一种5.0~9.3 GHz低功耗宽带低噪声放大器设计

针对Wi-Fi 6、Wi-Fi 6E(5 GHz、6 GHz)的低功耗、宽带宽等无线局域网(WLAN)设备需求,基于65 nm CMOS工艺设计了一款两级低功耗宽带低噪声放大器(LNA)。电路第一级采用结合互补共源电路的共源共栅结构,通过电感峰化技术和负反馈技术的运用,提高输入跨导,降低噪声,并拓展带宽和提高增益平坦度。第二级在共漏极缓冲器基础上引入辅助放大结构、电感峰化技术,实现抵消第一级共源管的噪声并拓展带宽。电路采用提出的前向衬底自偏置技术,以降低电路对电源电压的依赖,整体电路实现两路电流复用,从而有效降低了功耗。仿真结果表明,在5~9.3 GHz频带内LNA的S21为17.8±0.1 dB,S11小于-9 dB、S22小于-11.9 dB,噪声系数小于1.34 dB。在0.8 V电压下整体电路功耗为5.3 mW。     

数字音频功放处理芯片设计与实现

介绍了一种数字音频功率放大器数字信号处理的基本原理与实现方法.对整个数字音频功放的数字信号处理器的设计进行了详细介绍,并通过Xilinx FPGA工具进行了验证,利用Synopsys工具进行了完整的电路设计、仿真和版图设计.流片采用Chartered 0.35μm工艺.