Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce³⁺对Er³⁺上转换发光强度以及Er³⁺在1.5μm附近波段发光性能参数的影响，并从能量匹配及能级结构角度出发对Er³⁺/Ce³⁺间的能量转移机制进行了分析.分析认为，⁴I_11/2能级的Er³⁺通过无辐射能量转移把能量传递给²F_5/2能级的Ce³⁺关键词： 氟磷酸盐玻璃 光谱性质 光纤放大器 3+和Ce³⁺')" href="#">Er³⁺和Ce³⁺     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

热丝CVD生长金刚石薄膜喇曼散射研究

本文报道热丝化学气相沉积法（ＨＦＣＶＤ）生长金钢石薄膜的喇曼散射结果。选取多种峰型，对金钢石薄膜喇曼谱（１１０－１８００ｃｍ－１）采用最小二乘法进行非线性拟合，得到最佳拟合模型，其计算得到的拟合曲线怀实验谱图符合得较好。该模型揭示，石墨Ｄ峰（１３５５ｃｍ－１）是金刚石薄膜喇曼谱中不可缺少的一个组份，并且结合石墨Ｄ峰和金刚石喇曼的空间相关线型，可以解释金刚石喇曼区特殊峰形的物理机制，拟合参量的进一步     

STUDY ON THE CONCENTRATION DEPENDENCE OF ORIENTATION OF POLYSTYRENE ON SILVER BY THE SERS TECHNIQUE*

Polystyrene films were adsorbed onto a silver surface from dichloromethane solutions with concentrations of 0.1 to12 wt%, and then studied by the surface enhanced Raman technique. A critical concentration for coil interpenetration wasobserved.     

Spectral and photochemical characteristics of CdSe nanoparticles stabilized in polymer-containing media

The optical characteristics of CdSe nanoparticles, produced in aqueous solutions and polymer films in the reaction of cadmium chloride and sodium selenosulfate, were studied. The main parameters that make it possible to vary the forbidden band width were identified. The absorption, photoluminescence, Raman, and nonstationary decolorization spectra of CdSe nanoparticles of various sizes were analyzed. It was demonstrated that under the conditions of pulsed irradiation the CdSe nanoparticles are capable of accumulating excess electrons and inducing redox transformations in components of the solution (oxygen, methylviologen, and sulfite ions). __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 3, pp. 150–155, May–June, 2006.     

Effects of electrolytes used in roughening gold substrates by oxidation–reduction cycles on surface-enhanced Raman scattering

In this work, the effects of electrolytes used in roughening gold substrates by electrochemical methods on surface-enhanced Raman scattering (SERS) were first investigated. First, gold substrates were roughened by triangular-wave oxidation–reduction cycles (ORC) in aqueous solutions containing different kinds of 0.1 M electrolytes. Then Rhodamine 6G (R6G) was used as Raman probe to examine this effect of electrolytes used on the SERS observed. The result indicates that the highest intensity of SERS of R6G was obtained on the roughened Au substrate prepared in 0.1 M NaCl, which was less used in the literature. Meanwhile, it was also found that the rougher surface morphology observed, which is contributive to the higher SERS obtained, is corresponding to the smaller cathodic peak area shown in the cyclic voltammograms for roughening the Au substrate.     

多孔硅的电化学制备

单晶硅在氢氟酸溶液中阳极氧化可制得多孔硅, 多孔硅是一种以新形态存在的硅, 与单晶硅相比, 它表现出独特的物理性质和化学活性。荧光光谱峰的蓝移表明, 在p-型低掺杂衬底硅上形成的多孔硅中存在量子尺寸效应, 新近获得的Raman光谱也证实了这一点。     

结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。