Low temperature fired Ni-Cu-Zn ferrite with Bi4Ti3O12

The Ni-Cu-Zn ferrites with different contents of Bi₄Ti₃O₁₂ ceramics (1-8 wt%) as sintering additives were prepared by the usual ceramic technology and sintered at 900 °C to adapt to the low temperature co-fired ceramic (LTCC) technology. The magnetic and dielectric properties of the ferrite can be effectively improved with the effect of an appropriate amount of Bi₄Ti₃O₁₂. For all samples, the ferrite sintered with 2 wt% Bi₄Ti₃O₁₂ has relatively high density (98.8%) and permeability, while the ferrite with 8 wt% Bi₄Ti₃O₁₂ has relatively good dielectric properties in a wide frequency range. The influences of Bi₄Ti₃O₁₂ addition on microstructure, magnetic and dielectric properties of the ferrite have been discussed.     

Method of all-optical frequency-encoded binary adder system using nonlinear waveguide and reflecting semiconductor optical amplifiers

Arithmetic and algebraic operations are the most important part of optical computation and data processing. To implement the optical logic operations, different data encoding/decoding techniques have been reported. Frequency variant encoding/decoding technique is now performing a very faithful role in this regard. Frequency is the fundamental character of any signal and it remains unaltered in reflection, refraction, absorption, etc. during propagation and transmission of the signal. This is the most potential advantage of the frequency encoding technique over any other conventional encoding techniques. Here, in our proposed scheme of addition of binary bits made of two encoded frequencies in C-band (1535-1560 nm), the conjugate beam is generated in LiNbO₃ waveguide using cascaded sum and difference frequency generation by the nonlinear interaction with a third frequency, exploiting the nonlinear response character of periodically poled LiNbO₃ waveguide. The cross-gain modulation property of reflecting semiconductor optical amplifier (RSOA) has also been exploited here for frequency conversion purposes.     

Infrared asymptotic freedom of a hierarchical φ 3 6 lattice theory

For the weakly coupled lattice ₃ ⁶ theory in a hierarchical model approximation a nonperturbative renormalization group analysis in the spirit of Gawedzki and Kupiainen is performed to study the flow of the effective actions. We deduce a domain of attraction to the tricritical (Gaussian) fixed point. The two relevant coupling constants of the problem are controlled by analytic continuation to complex domains, tracing their images under the renormalization group iterations.     

New generalized Jacobi elliptic function rational expansion method

In this work, a new generalized Jacobi elliptic function rational expansion method is based upon twenty-four Jacobi elliptic functions and eight double periodic Weierstrass elliptic functions, which solve the elliptic equation ?^′2=r+p?²+q?⁴, is described. As a consequence abundant new Jacobi-Weierstrass double periodic elliptic functions solutions for (3+1)-dimensional Kadmtsev-Petviashvili (KP) equation are obtained by using this method. We show that the new method can be also used to solve other nonlinear partial differential equations (NPDEs) in mathematical physics.     

掺铒光纤激光器中自脉冲的控制

在实验中观察到了掺铒光纤激光器中自脉冲，并通过加反馈的方法控制了自脉冲。在理论上利用带反馈的两激光器的耦合模型，成功地解释了自脉冲的产生及其控制的物理机制。结果表明，掺铒光纤激光器中两正交偏振态的反馈及其耦合对光脉冲的形成及控制的重要性。     

BaTiO3晶体中光束自陷的理论研究

对聚焦光束通过有一定外加电场ＢａＴｉＯ３晶体时的自陷现象进行了理论分析，发现在正切割晶体中观察空间孤子是不合适的，因仅利用了很微小的电光系数γ３３。对异型切割情况进行了讨论，给出了维持光束自陷的外加电场范围和实际观察的最佳角度。     

LuI3 闪烁晶体的第一性原理研究

采用基于第一性原理的赝势和平面波方法计算了新型闪烁晶体基质材料 LuI₃的结构特性和电子特性. 计算结果表明: -4.4 eV附近有一个宽度约为0.2 eV的窄带, 主要是Lu的4f态; -3.55–0 eV之间的态组成了价带, 这主要是I的5p态; 2.44–12.35 eV之间的态组成了LuI₃的导带, 这主要来源于Lu的5d态, 其中还含有少量的Lu的6s态的贡献. 在-3.46 eV处, Lu的6s态、4f态和I的5p态同时出现了尖峰, 说明相邻的Lu原子的6s态, 4f态与I原子的5p态之间的相互作用强, 出现了杂化峰. 估算出LuI₃晶体的理论光产额约为100000 ph/MeV, 主要得益于LuI₃合适的带隙和能带结构. 关键词： 3')" href="#">LuI₃ 第一性原理 电子结构     

非相干光作用下的Ce：BaTiO3自泵浦相位共轭镜特性

地Ｃｅ：ＢａＴｉＯ３晶体的自泵浦相位共竟然非相干光作用下自泵浦相位共轭反射率增强的特性进行了研究。实验是在Ｈｅ－Ｎｅ激光产生稳态自泵浦相位共轭输出后，用非相干光平行ｃ轴照射来获得这一增强特性的，当水平移动非相干光入射位置，发现有两个区域非相干光作用能使相位共轭反射率增加，本文对此进行了相应的分析和讨论。     

黄酮醇-3-O-D-木糖(1→2)-L-鼠李糖甙类化合物的NMR谱研究

用2D NMR技术研究了从朝鲜淫羊藿中分离的一个黄酮醇-3-O-D-木糖-鼠李糖甙的结构,确定其双糖为1→2连接,并明确了判断同类黄酮醇-3-O-木糖基(1→2)-鼠李糖甙的简易标准.     

用甲醇－氢混合气源在不锈钢上生长金刚石薄膜的研究

利用甲醇－氢（ＣＨ３ＯＨ－Ｈ２）混合气体为气源，３０ｎｍ厚的无定形硅为过渡层，借助于微波等离子体化学气相沉积（ＭＷＣＶＤ）成功地将金刚石薄膜生长在不锈钢上，其最低生长温度可至４２０℃，并且甲醇－氢混合气体比传统的甲烷－氢（ＣＨ４－Ｈ２）更具优势，测试表明这种金刚石薄膜有希望作为耐磨层在工业上应用