一种新颖的跳频振荡器

摘要本文综合考虑到频率合成技术及单端口体波谐振器HBAR的特点提出了一种基于一阶非线性PLL的锁相频率合成方案。文中对这种跳频方案的原理、性能特点作了详细论述、并通过实验、从不同角度对本方案进行了说明、同时对整机的各项指标作了详尽测试:在HBAR无载Q_N值为4000的情况下,该多模跳频振荡源的捷变范围为770MHz—840MHz、捷变时间小于20μS。杂散分量低于—60dB、二次谐波分量低于—34dB。离散捷变频率点为16点,构成闭环跳频系统后,对开环VCO的短稳改善了三个量级:从1.3×10~(-5)/ms到1.6×10~(-8)/ms及9.56×~(-7)/s到1.69×!0~(-9)/s,尤为重要的是该多模跳频振荡源达到此性能所需的硬件量很小,因此在对体积要求苛刻的场合、此种跳频方案具有极强的竞争力。     

聚(酪氨酸酯对苯二甲酰胺)碳酸酯药物控制释放材料的研究

报道了一类生物可降解聚（酪氨酸酯对苯二甲酰胺）碳酸酯的合成和结构表征，研究了聚合物的性质和体外降解性能，并以５ 氟脲嘧啶和牛血清白蛋为模型，对它们作为药物控制释放材料的性能进行了初步评价．     

温度及pH敏感的树枝状高分子衍生物合成及药物控制释放研究

对合成的系列聚酰胺-胺型(PAMAM)树枝状高分子进行端基的羟基化和氯乙酰化两步修饰,使PAMAM最外层接上烷基氯.以修饰产物为引发剂,通过原子转移自由基引发甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)聚合得到树枝状PAMAM高分子衍生物,并对其结构用FTIR、1H-NMR和粒径分析进行了表征.紫外可见分光光度仪测定证实此高分子具有温度及pH敏感性.通过对小分子药物控制释放研究表明,此树枝状高分子衍生物通过环境pH值可有效地控制小分子药物的释放.     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Electrochemistry of capillary systems with narrow pores. IV. Dialysis potentials

The dialysis potentials of different collodion membranes with graded pore sizes and electrochemical activities have been measured in dilute aqueous KCl solutions as functions of concentration. It is possible to predict the value of the diffusion potential within a few millivolts on the basis of electrical conductivity data obtained with the same membranes. In general, the measured values are lower than those calculated. It is assumed that this difference is caused by the membranes having a distribution of pore sizes.     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.     

Studies on controlled potential coulometric determination of gallium in sodium perchlorate and sodium thiocyanate

Controlled potential coulometric (CPC) studies were carried out for developing a method to determine gallium at milligram levels, in the mixed supporting electrolyte medium (4 M NaClO₄ + 0.5 M NaSCN), employing stirring mercury as a working electrode. Investigations for optimization of working electrode potentials, quantity of charge, level of background current and electrolysis time for achieving quantitative reduction of Ga(III) to Ga and its oxidation back to Ga(III), were undertaken. Effect of gallium content and interference of zinc in of gallium determination were also studied. The developed methodology was employed for the determination of gallium in pure Ga as well as in synthetic U + Ga mixture solutions. Accuracy and precision values of better than 0.5% were obtained at 1-2 mg levels.