多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

具有大电流输出能力的开关电源

本文介绍大电流输出的开关电源芯片MAX1623的特点，设计原理和典型应用电路。     

N个振荡器相互注入锁定同步振荡系统

本文对Ｎ个振荡器相互注入锁定同步振荡系统提出了一种通用的分析方法。建立了该系统的完整非线性等效模型，导出了系统的状态方程。对于各种不同电路形式的振荡系统，只要将具体的电路参数代入，就可计算其输出功率，功率合成效率及工作频率等参数，从而使这类系统的计算机辅助分析和设计成为可能。     

Circuit analysis of the compound quasi-optical power combiner

In 1991, we developed a new type of quasi-optical power combiner, called a compound quasi-optical power combiner, at Ka-band. In this paper, the circuit of such a compound quasi-optical power combiner is analysed. Its equivalent circuit model is proposed. The circuit equations, the balance condition, the injection locking and the stabilized condition of the compound quasi-optical power combiner are studed by the equivalent circuit model. As an example, a compound quasi-optical power combiner which consists of two single—cavity, two—device power combiners is analysed     

Lifetime control in silicon power P-i-N diode by ion irradiation: Suppression of undesired leakage

The irradiation with high-energy (7.35 MeV) protons through a set of energy degraders was used to suppress leakage of the silicon power diodes subjected to local lifetime control. The aim was to modify the profile of recombination centers and to reduce production of vacancy complexes. The high-energy proton irradiation was compared with standard local lifetime killing by high-energy alphas. Recombination centers arising from irradiation were characterized after irradiation and subsequent annealing at 220 and 350 °C by deep level transient spectroscopy and I-V profiling. Static and dynamic parameters of irradiated diodes were also measured and compared. Results show that the applied irradiation with protons provides 3-10 times lower leakage compared to standard alphas for equivalent reduction of the reverse recovery current maximum. On the other hand, the excessive formation of hydrogen donors at high proton fluences and their diffusion during annealing at 350° decreases diode blocking capability.     

我国居民收入、人口、教育、财政政策和货币政策与居民消费模型的实证分析

本文从影响消费的各个因素:居民收入、人口、教育、国家宏观政策等着手,对各因素进行了相关分析,运用多元统计中的岭回归估计法建立消费模型。从定量和定性分析的角度,分析了我国居民消费水平、居民收入、人口增长率、各层次教育、国家财政支出和银行利率等相关因素之间相互影响的数量变动关系和内在规律,就如何提高居民消费水平促进经济协调发展提出若干对策。     

Energy considerations for topology-unaware TDMA MAC protocols

Since the energy budget of mobile nodes is limited, the performance of a networking protocol for such users should be evaluated in terms of its energy efficiency, in addition to the more traditional metrics such as throughput. In this paper, two topology-unaware MAC protocols—in which the scheduling time slots are allocated irrespectively of the underline topology—are considered and their energy consumption is derived. It turns out that the per frame power consumption is lower for the less throughput-efficient protocol, suggesting that energy savings are achieved at the expense of throughput.A finer energy consumption study is carried out in the sequel, focusing on the amount of energy consumed to successfully transmit a certain number of packets, or equivalently, on the per successful transmission power consumption. It is shown that the more throughput-efficient protocol consumes less energy per successful transmission under certain conditions (which are derived), due to the lower number of transmission attempts before a data packet is successfully transmitted. The same energy-efficiency relation is observed under certain conditions (which are derived) when data packets are delay constrained and, thus, may become obsolete if not transmitted successfully within a specific time interval. The conditions under which the per successful transmission power consumption is minimized for delay-constrained packets, are also established in this work and it is observed that when the system throughput is maximized, the power consumed is close to the minimum. Simulation results support the claims and the expectations of the aforementioned analysis.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

有消费或投资的华氏宏观经济模型

本文对华罗庚教授的宏观经济模型进行了推广 ,在原来模型的基础上 ,分别增加了消费、投资 ,得到两种不同的模型 ,并对模型具有经济意义的解进行了研究