Oriented thin films from soluble polythiophenes

The degree of orientation of thin films of eight different polymeric structures, belonging to the class of soluble polyalkylthiophenes (PATs) has been studied. Thin films of the polymers, obtained by spin coating onto glass substrates, were oriented by means of the rubbing technique. The degree of orientation is related to the regioregularity of the system: highly regioregular polymers can be oriented, while regiorandom materials are not oriented. The degree of orientation can be improved by thermal annealing of the oriented films. As a result of annealing, which was performed at different temperatures according to the thermal behavior of the polymers, it was possible to increase the polarization ratio for poly(3-decylthiophene) up to 12–13 as detected from the UV-vis spectra in polarized light. Moreover in the investigated PATs, both the key role of molecular weight and its distribution for achieving a high orientation degree has been assessed. Copyright © 2003 John Wiley & Sons, Ltd.     

溅射法制备n型碲化镉薄膜的光电化学特性研究

采用溅射法制备了n型碲化镉薄膜。研究了不同沉积时间制备的n型碲化镉薄膜的形貌、结构和光学性质,以及薄膜厚度和退火工艺对n型碲化镉薄膜光电化学特性的影响。实验结果表明,溅射时间为25 min的碲化镉薄膜具有较好的PEC性能。退火工艺可以提高沉积的n型碲化镉薄膜的光电化学性能。当用饱和氯化镉溶液涂覆碲化镉薄膜并在真空中400 ℃退火时,n型碲化镉薄膜的光电化学性能最佳,光电流达到301 μA/cm²。     

Nonstationary Markov chains and convergence of the annealing algorithm

We study the asymptotic behavior as timet + of certain nonstationary Markov chains, and prove the convergence of the annealing algorithm in Monte Carlo simulations. We find that in the limitt + , a nonstationary Markov chain may exhibit phase transitions. Nonstationary Markov chains in general, and the annealing algorithm in particular, lead to biased estimators for the expectation values of the process. We compute the leading terms in the bias and the variance of the sample-means estimator. We find that the annealing algorithm converges if the temperatureT(t) goes to zero no faster thanC/log(t/t ₀) ast+, with a computable constantC andt ₀ the initial time. The bias and the variance of the sample-means estimator in the annealing algorithm go to zero likeO(t^–1+) for some 0<1, with =0 only in very special circumstances. Our results concerning the convergence of the annealing algorithm, and the rate of convergence to zero of the bias and the variance of the sample-means estimator, provide a rigorous procedure for choosing the optimal annealing schedule. This optimal choice reflects the competition between two physical effects: (a) The adiabatic effect, whereby if the temperature is loweredtoo abruptly the system may end up not in a ground state but in a nearby metastable state, and (b) the super-cooling effect, whereby if the temperature is loweredtoo slowly the system will indeed approach the ground state(s) but may do so extremely slowly.     

热处理对Nylon—11结构的影响

对不同温度热处理过的Nylon－11样品，采用广角X射线衍射（WAXD），根据X射线衍射强度理论，用多重峰图解分峰方法研究了Nylon－11结构的变化，并导出了计算Nylon－11结晶度的公式．所得结果与密度法、DSC法进行了比较．同时也给出了Nylon－11的有关热力学参数，     

Thermal behaviour of advanced composite materials based on SiC fibres

Emanation thermal analysis (ETA) was used for characterization of thermal behaviour of SiC_f/SiC composites on heating in argon and air, respectively. Effect of gas environment (argon, air) and helium ions implantation on the microstructure development of the SiC_f/SiC composite prepared by chemical vapour infiltration (CVI) from Nicalon CG fibres was investigated under in situ conditions of heating. The annealing of near surface structure irregularities was observed in the range 280-700°C and evaluated by means of the mathematical model, assuming that the structure irregularities served as diffusion paths for radon. The ETA reflected the formation of amorphous silica and its subsequent crystallization to crystoballite. Morphology of the SiC_f/SiC samples before and after the heat treatments was characterized by means of SEM. This revised version was published online in July 2006 with corrections to the Cover Date.     

Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of hydrocolloids on starch thermal transitions,as measured by DSC

Differential scanning calorimetry (DSC) was used to analyze the influence of different hydrocolloids (xanthan, guar, and locust bean gums, carboxymethylcellulose and sodium alginate) on the gelatinization of corn starch in systems with starch concentration ranging between 0.1 and 0.7 g starch/g mixture. The reduction of available water produced a shift in gelatinization temperature, especially of the conclusion temperature. The effect was more marked for ionic hydrocolloids. The influence of hydrocolloids on glass transition temperature (T _g) of gelatinized starch suspensions and on the glass transition temperature of the maximally freeze-concentrated solute/unfrozen water matrix (T _g) was also studied.T _g onset values ranged between –4.5 and –5.5C for corn starch pastes with and without hydrocolloids. Those hydrocolloids that increased the viscosity of the unfrozen matrix inhibited additional ice formation during thawing (devitrification).Starch concentration and final heating temperature were found to be relevant factors affecting the kinetics of amylopectin retrogradation during frozen storage at –4C. Xanthan gum failed to prevent amylopectin retrogradation; this observation could be attributed to the fact that gums act outside the starch granule, while amylopectin retrogradation takes place within the granule.     

Surface cavities produced by high‐dose nitrogen ion implantation into silicon

Nitrogen ion implantation (24 keV, 4.6 × 10¹⁷ cm^?2) into (100) a p‐type silicon wafer material and a subsequent electron beam annealing at 1100 °C for 15 s under high vacuum conditions leads to the formation of an uneven surface in the implanted region caused by nitrogen bubbles beneath the surface. Annealing at 1200 °C for 300 s results in surface cavities with a mean diameter of 350 nm and a surface coverage of 3–4% and an average depth of ～60 nm. Nuclear reaction analysis reveals that the nitrogen concentration in the as‐implanted state exceeds 57 at%, the value of stoichiometric Si₃N₄. Annealing at 1100 °C for 15 s slightly reduces the nitrogen peak concentration, whereas annealing at 1200 °C for 300 s induces a significant alteration to the shape of the nitrogen depth profile coupled with the lowering of the concentration close to the stoichiometry of Si₃N₄. The results present a new method of producing sub‐micrometre cavities embedded in a thin silicon nitride film on wafer silicon which may lead to novel micro‐electronic and biotechnology applications. Copyright © 2007 John Wiley & Sons, Ltd.     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

手性锌卟啉对咪唑类客体分子识别的构象研究

Chiral recognition is an attractive subject in the area of host-guest chemistry. Conformation study is performed to understand chiral recognition of zinc(Ⅱ) porphyrin with imidazole derivatives on a molecular level. The molecular recognition of three novel chiral zinc porphyrin(1-3) with four types of imidazole derivatives was studied. The conformation searching of this host-guest system was studied by using simulated annealing method on the basis of Tripos force field. The different minimal energy conformation of imidazole combind with porphyrin was studied. The quantum chemistry calculation was performed to calculate the single-point energies of the host-guest system. The minimal energy conformation of ZnT(o-BocAla)APP (3)-Im showed that Im attaching from the single-side chain of the host had the reasonable configuration than that from the three-side chain. The former also had the lower energy than the latter. And the quantum chemistry calculation results of orbital energy, ΔE_L-H, and atomic net charge revealed the same way. The results illumate that combination oriention of the host-guest system is the single chain of the hosts.