The synergistic catalysis on Co nanoparticles and CoN_x sites of aniline-modified ZIF derived Co@NCs for oxidative esterification of HMF

An efficient sustainable and scalable strategy for the synthesis of porous cobalt/nitrogen co-doped carbons(Co@NCs) via pyrolysis of aniline-modified ZIFs,has been demonstrated.Aniline can coordinate and absorb on the surface of ZIF(ZIF-CoZn3-PhA),accelerate the precipitation of ZIFs,thus resulting in smaller ZIF particle size.Meanwhile,the aniline on the surface of ZIF-CoZn3-PhA promotes the formation of the protective carbon shell and smaller Co nanoparticles,and increases nitrogen content of the catalyst.Because of these prope rties of Co@NC-PhA-3,the oxidative esterification of 5-hydroxymethylfurfural can be carried out under ambient conditions.According to our experimental and computational results,a synergistic catalytic effect between CoN_x sites and Co nanoparticles has been established,in which both Co nanoparticles and CoN_x can activate O_2 while Co nanoparticles bind and oxidize HMF.Moreover,the formation and release of active oxygen species in CoN_x sites are reinfo rced by the electronic interaction between Co nanoparticles and CoN_x.     

INFLUENCES OF ACID POST-TREATMENT ON THE MORPHOLOGY OF SOAPFREE P（MMA-EA-MAA） PARTICLES PREPARED BY SEEDED EMULSION POLYMERIZATION

Soap-free poly（methyl methacrylate-ethyl acrylate-methacrylic acid） latex particles with narrow size distribution were synthesized by seeded emulsion polymerization, and the porous particles were created by a stepwise alkali/acid treatment method. Effects of acid treatment conditions on the particle morphology were investigated. Results show that one to three pores were formed inside most of particles after post-treatment. At pH 7.0, when the treatment temperature was lower than 70℃, the size of particles and the volume of pores remained almost unchanged, and these two values increased significantly when the temperature was higher than 70℃. Both the particle size and the pore volume decreased with the increase of initial pH value and treatment time in the acid treatment. As the pH was below 4.0 and the treatment time was longer than 180 min, the particles shrunk in size.     

交联壳聚糖多孔微球对染料的吸附平衡及吸附动力学分析

研究了交联壳聚糖多孔微球对染料的吸附平衡规律,探讨了染料溶液在不同的初始浓度、pH值及不同吸附剂用量条件下吸附动力学规律及吸附动力学控制机理。结果表明,壳聚糖微球对染料的吸附规律可较好地符合Langmuir吸附等温式,吸附动力学模型可以用表观二级速率方程来描述。     

部分水解聚丙烯酰胺在多孔介质中的静态吸附研究——水解度对吸附量的影响

部分水解聚丙烯酰胺在多孔介质中的静态吸附研究———水解度对吸附量的影响杨继萍李惠生黄鹏程（北京理工大学化工与材料学院北京１０００８１）（北京航空航天大学材料科学与工程系北京１０００８３）关键词部分水解聚丙烯酰胺，水解度，多孔介质，静态吸附聚合物作为...     

在NaCl溶液中以海藻酸钠为致孔剂制备快速温度响应型多孔聚(N-异丙基丙烯酰胺)水凝胶

用海藻酸钠为致孔剂,在NaCl水溶液中制备了多孔聚(N-异丙基丙烯酰胺)(PNIPAAm)水凝胶,分别用扫描电镜(SEM)和小角X光散射(SAXS)对PNIPAAm水凝胶的多孔结构进行了表征.结果发现,PNIPAAm水凝胶网络中的孔洞相互贯通,随着反应介质中NaCl浓度的增加,孔洞尺寸逐渐增大,孔洞排列越来越有序.相应地,PNIPAAm水凝胶的消溶胀速率随着反应介质中NaCl浓度的增加而提高.当NaCl浓度为0.6 mol/L时制备的PNIPAAm水凝胶,从室温处于平衡溶胀状态快速转移到45℃水介质中,1 min后凝胶的水保留率不足15%,4 min后消溶胀就达到平衡状态.     

气相沉积法制备多孔ZnO薄膜及其光伏特性

通过气相沉积法, 在大气环境下退火, 制备了多孔ZnO薄膜. 这种多孔ZnO薄膜的制备方法具有成膜过程简单且工艺可精确控制等特点. 将多孔ZnO薄膜用胶体CdSe量子点来敏化获得太阳能电池, 具有1.01%的能量转换效率.     

Application studies of activated carbon derived from rice husks produced by chemical-thermal process--a review

The production of functional activated carbon materials starting from cheap natural precursors using environmentally friendly processes is a highly attractive subject in material chemistry today. Recently, much attention has been focused on the use of plant biomass to produce functional carbonaceous materials, encompassing economic, environmental and social issues. Besides the classical route to produce activated carbons from fossil materials, rice husk shows clear advantages in that it can generate a variety of cheap and sustainable carbonaceous materials with attractive nanostructure and functional patterns for a wide range of applications. From a comprehensive literature review, it was found that porous carbon that derived from rice husks, in addition to having wide availability, has fast kinetics and appreciable adsorption capacities too. Porous carbon materials also play a significant role in new applications such as catalytic supports, battery electrodes, capacitors, and gas storage. In this review, an extensive list of rice husks literature has been compiled. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.     

电化学聚合吡咯/噻吩导电共聚物纳米纤维阵列及其表征

导电聚合物因其具有良好的空气稳定性、电化学成膜性和导电性等特点,在二次电池、电色显示及固体电容器等方面都有诱人的应用前景.近年来人们研究导电聚合物的纳米结构时发现,由于超分子效应,纳米纤维中聚合物链会以平行于纤维轴向为优先取向,这种优先取向使导电聚合物纳米纤维的电导率比块材有极大提高.     

多孔硅表面钝化对其发光性能的影响

报道多孔硅（PS）的表面钝化对其光致发光（PL）和电致发光（EL）的影响。PL和EL谱表明,经钝化处理的PS的PL和EL强度明显增强,且发光峰位较大蓝移;存放实验表明,经钝化处理的PS的PL和EL发光强度和发光峰位具有较好的稳定性;I～V曲线显示,经钝化处理的PS发光器件具有较低的启动电压。这些结果表明：用钝化处理的方法是提高PS的PL和EL强度和稳定性及改善其器件性能的有效途径。     

水热反应条件对多孔球状Bi2WO6光催化剂结构及性能的影响

采用水热法制备了Bi₂WO₆光催化剂, 考察了水热反应温度、 水热反应时间及前驱体溶液pH值等条件对其对乙烯可见光催化活性的影响, 并通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 紫外-可见漫反射光谱(UV-Vis DRS)和比表面积分析等对催化剂的晶相组成、 微观形貌和光学性质等进行表征. 结果表明, 在水热反应温度为120 ℃、 水热反应时间为12 h、 前驱体溶液pH=0.5条件下, Bi₂WO₆光催化剂经过各向异性生长以及自组装奥斯特瓦尔德成熟(Ostwald ripening)过程, 形成由二维纳米薄片自组装的多孔微球状结构, 有效增大了与乙烯气体的接触面积, 禁带宽度降至2.86 eV, 可见光响应范围拓宽, 表现出优异的光催化性能, 在可见光下240 min内对乙烯的降解率达到13.69%.