Improved square coloring of planar graphs

Square coloring is a variant of graph coloring where vertices within distance two must receive different colors. When considering planar graphs, the most famous conjecture (Wegner, 1977) states that $\frac{3}{2}\mathrm{\Delta }+1$ colors are sufficient to square color every planar graph of maximum degree Δ. This conjecture has been proven asymptotically for graphs with large maximum degree. We consider here planar graphs with small maximum degree and show that $2\mathrm{\Delta }+7$ colors are sufficient, which improves the best known bounds when $6?\mathrm{\Delta }?31$.     

Fabrication and characterization of a planar interleaved micro-transformer with magnetic core

This paper presents the design, the fabrication and the characterization of a planar interleaved micro-transformer with an Yttrium Iron Garnet (YIG) core. The design of this micro-transformer and the manufacturing steps are presented. HFSS software is used for the conception and the simulation of the interleaved magnetic micro-transformer. It is composed of two identical windings. A bottom magnetic core is used to improve the integrated transformer performances. To form the windings, we have used a surface micromachining process. We have also used a negative photoresist (SU-8) as an insulating layer and as support for the fabrication of a bridge to connect the central end of the coils to the ground shield. The micro-transformer have been characterized with impedance meter up to 100 MHz, and completed to 1 GHz using vector network analyzer.     

Improved morphology and enhanced stability via solvent engineering for planar heterojunction perovskite solar cells

Solvent engineering technique for planar heterojunction perovskite solar cells is an efficient way to achieve uniformly controlled grain morphology for perovskite films. In this report, diethyl ether solvent engineering technique was used for Methyl ammonium lead triiodide (CH₃NH₃PbI₃) perovskite thin films for planar heterojunction solar cells which exhibited a PCE of 9.20%. Morphological improvements and enhanced grain sizes leads to enhanced absorption of CH₃NH₃PbI₃. Moreover solar cells have showed an excellent environmental stability of more than 100 days. This increase in efficiency is due to improved film morphology of perovskite layer after solvent treatment which has been revealed under UV–Vis spectroscopy, SEM images, X-ray diffraction and impedance spectroscopy.     

Ultra-wideband balun and power divider using coplanar waveguide to microstrip transitions

An ultra-wideband transition from coplanar waveguide (CPW) to a pair of microstrip lines is presented in this letter. It is shown that the proposed transition can be used to devise an ultra-wideband T-junction power divider with equally split in-phase output signals. More importantly, it is demonstrated that the out-of-phase magnetic currents in the slots of the CPW can be utilized to achieve an out-of-phase power divider or a balun. Both the T-junction power divider and the balun benefit from compact size and good performance over an ultra wide frequency band from 3 to 16 GHz. Prototypes of both proposed devices are fabricated and measured to provide an experimental verification on the concept and numerically predicted features.     

Fabrication of a planar water gated organic field effect transistor using a hydrophilic polythiophene for improved digital inverter performance

A planar water gated OFET (WG-OFET) structure is fabricated by patterning gate, source and drain electrodes on the same plane at the same time. Transistor output characteristics of this novel structure employing commercial regioregular poly(3-hexylthiophene) (rr-P3HT) as polymer semiconductor and deionized (DI) water as gate dielectric show successful field effect transistor operation with an on–off current ratio of 43 A/A and transconductance of 2.5 μA/V. These output characteristics are improved using P3HT functionalized with poly(ethylene glycol) (PEG) (P3HT-co-P3PEGT), which is more hydrophilic, leading to on–off ratio of 130 A/A and transconductance of 3.9 μA/V. Utilization of 100 mM NaCl solution instead of DI water significantly increases the on–off ratio to 141 A/A and transconductance to 7.17 μA/V for commercial P3HT and to 217 A/A and to 11.9 μA/V for P3HT-co-P3PEGT. Finally, transistors with improved transconductances are used to build digital inverters with improved characteristics. Gain of the inverters employing P3HT and P3HT-co-P3PEGT are measured as 2.9 V/V and 10.3 V/V, respectively, with 100 mM NaCl solution.     

Multidimensional gas chromatography for the characterization of permanent gases and light hydrocarbons in catalytic cracking process

An integrated gas chromatographic system has been successfully developed and implemented for the measurement of oxygen, nitrogen, carbon monoxide, carbon dioxide and light hydrocarbons in one single analysis. These analytes are frequently encountered in critical industrial petrochemical and chemical processes like catalytic cracking of naphtha or diesel fuel to lighter components used in gasoline. The system employs a practical, effective configuration consisting of two three-port planar microfluidic devices in series with each other, having built-in fluidic gates, and a mid-point pressure source. The use of planar microfluidic devices offers intangible advantages like in-oven switching with no mechanical moving parts, an inert sample flow path, and a leak-free operation even with multiple thermal cycles. In this way, necessary features such as selectivity enhancement, column isolation, column back-flushing, and improved system cleanliness were realized. Porous layer open tubular capillary columns were employed for the separation of hydrocarbons followed by flame ionization detection. After separation has occurred, carbon monoxide and carbon dioxide were converted to methane with the use of a nickel-based methanizer for detection with flame ionization. Flow modulated thermal conductivity detection was employed to measure oxygen and nitrogen. Separation of all the target analytes was achieved in one single analysis of less than 12 min. Reproducibility of retention times for all compounds were found to be less than 0.1% (n = 20). Reproducibility of area counts at two levels, namely 100 ppm_v and 1000 ppm_v over a period of two days were found to be less than 5.5% (n = 20). Oxygen and nitrogen were found to be linear over a range from 20 ppm_v to 10,000 ppm_v with correlation coefficients of at least 0.998 and detection limits of less than 10 ppm_v. Hydrocarbons of interest were found to be linear over a range from 200 ppb_v to 1000 ppm_v with correlation coefficients of greater than 0.999 and detection limits of less than 100 ppb_v.