Graded PZT ceramics for piezoelectric transformers

In the present study two types of the synthesized Pb(Zr_1−xTi_x)O₃ (PZT) powders differing in Zr/Ti ratio were used to prepare the spatially inhomogeneous (i.e., graded) structure. A position-dependent chemical composition was expected to cause the property gradient. Disk-shaped compacts were prepared in a way such that two different orientations of the radial gradients were formed. The solid state sintering under pressure was utilized to prepare ceramics. Simultaneous thermal analysis was used to study thermal behavior of the ceramic powders. Graded PZT ceramics were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. It was also characterized in terms of its dielectric properties by both bridge technique and the impedance spectroscopy. On the basis of graded PZT ceramics the disk-shaped radial mode piezoelectric transformer was developed and fabricated.     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Application of an artificial neural network (ANN) and piezoelectric chemical sensor array for identification of volatile organic compounds

A piezoelectric chemical sensor array was developed using four quartz crystals. Gas chromatographic stationary phases were used as sensing materials and the array was connected to an artificial neural network (ANN). The application of the ANN method proved to be particularly advantageous if the measured property (mass, concentration, etc.) should not be connected exactly to the signal of the transducers of the piezoelectric sensor. The optimum structure of neural network was determined by a trial and error method. Different structures were tried with several neurons in the hidden layer and the total error was calculated. The optimum values of primary weight factors, learning rate (η=0.15), momentum term (μ=0.9), and the sigmoid parameter (β=1) were determined. Finally, three hidden neurons and 900 training cycles were applied. After the teaching process the network was used for identification of taught analytes (acetone, benzene, chloroform, pentane). Mixtures of organic compounds were also analysed and the ANN method proved to be a reliable way of differentiating the sensing materials and identifying the volatile compounds.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

Applications of Macrocyclic Polyethers in Analytical Sensors and Ion Separation

Artificial macrocyclic polyethers were synthesized and applied as neutral carriers for ion-selective PVC membrane electrodes, ion-chromatographic packing materials, extractants and adsorbents for ion separation, coating materials for piezoeletrical membrane sensors for organic species, and ion-transport carriers through liquid membranes. Ion-selective electrodes such as those for K⁺ Na⁺, UO₂²⁺, Cs⁺, Pb²⁺, Fe³⁺, Hg²⁺ and Ag⁺ ions based on crown ether-phosphotungstic acid (PW) precipitates and dithio crown ethers respectively were prepared and showed good sensitivity and selectivity. Crown ether-PW precipitates were applied as adsorbents of rare-earth ions and some common heavy-metal ions. Some rare-earth ions were easily extracted with crown ethers, especially 15-crown-5. Poly(stytene/divinyl benzene) cryptand-22 resin was synthesized and applied as a bifunctional stationary phase of ion chromatography to separate bom cations and anions, even some organic carboxylate geometric isomers. Crown ethers such as mono-benzo-15-crown-5 was successfully applied as a coating material on piezoelectric quartz membrane sensors for some organic species. The oscillation frequency of the crown-ether quartz-membrane sensor was sensitive to organic vapours such as amines and alcohols. Upon adsorption of organic species on the crown-ether quartz membrane, the oscillation frequency of the sensor decreased obviously. Special crown ether such as dibenzo-16-crown-5-oxyacetic acid, decyl-cryptand-22 and 1, 4-dihydro-pyridine-18-crown-5 were synthesized and successfully applied as ion-transport carriers (ionophores) for transport of Na⁺ K⁺ and Mg²⁺ ions through liquid membranes.     

Mixed mode fracture of a piezoelectric–piezomagnetic bi-layer structure with two un-coaxial cracks parallel to the interface and each in a layer

The purpose of the present work is to study the mixed mode fracture of a piezoelectric–piezomagnetic composite with two un-coaxial cracks parallel to the interface and each in a layer. Methods of generalized dislocation simulation, Green’s function, Cauchy singular integral equation and Lobatto–Chebyshev collocation are combined together to get the numerical results of mechanical strain energy release rate (MSERR). Three kinds of effects are revealed by parametric studies, i.e., the free-surface effect, the shielding effect and the interference effect, and they are used to interpret the characteristics of COD and MSERR curves. In addition, the effects of shear loading, magnetic loading and electric loading on MSERR are also disclosed, respectively, by varying the corresponding loading factor.     

Electrically Tunable Nanoporous Carbon Hybrid Actuators

A novel nanoporous carbon/electrolyte hybrid material is reported for use in actuation. The nanoporous carbon matrix provides a 3D network that combines mechanical strength, light weight, and low cost with an extremely high surface area. In contrast to lower dimensional nanomaterials, the nanoporous carbon matrix can be prepared in the form of macroscopic monolithic samples that can be loaded in compression. The hybrid material is formed by infiltrating the free internal pore volume of the carbon with an electrolyte. Actuation is prompted by polarizing the internal interfaces via an applied electric bias. It is found that the strain amplitude is proportional to the Brunauer‐Emmett‐Teller (BET) mass specific surface area, with reversible volume strain amplitudes up to the exceptionally high value of 6.6%. The mass‐specific strain energy density compares favorably to reported values for piezoceramics and for nanoporous metal actuators.     

Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method

The three-dimensional (3D) coupled analysis of simply-supported, functionally graded piezoelectric material (FGPM) circular hollow sandwich cylinders under electro-mechanical loads is presented. The material properties of each FGPM layer are regarded as heterogeneous through the thickness coordinate, and obey an exponent-law dependent on this. The Pagano method is modified to be feasible for the study of FGPM sandwich cylinders. The modifications are as follows: a displacement-based formulation is replaced by a mixed formulation; a set of the complex-valued solutions of the system equations is transferred to the corresponding set of real-valued solutions; a successive approximation method is adopted to approximately transform each FGPM layer into a multilayered piezoelectric one with an equal and small thickness for each layer in comparison with the mid-surface radius, and with the homogeneous material properties determined in an average thickness sense; and a transfer matrix method is developed, so that the general solutions of the system equations can be obtained layer-by-layer, which is significantly less time-consuming than the usual approach. A parametric study is undertaken of the influence of the aspect ratio, open- and closed-circuit surface conditions, and material-property gradient index on the assorted field variables induced in the FGPM sandwich cylinders.     

Excitation of piezoelectric device through resonant helical coil antenna-like structure

A resonant helical coil antenna-like structure has been explored for wireless excitation of piezoelectric devices. The basic idea behind this wireless excitation of piezoelectric device is electromagnetic resonance along with piezoelectric resonance. The analytical studies reveal that the maximum excitation occurs in the piezoelectric device when the operating frequency of the system coincides with its mechanical resonant frequency. It has been seen that the intensity of piezoelectric stimulation depends on the frequency of operation, air gap, relative position, electric load, and the generated electric field strength by the helical coil antenna-like structure. The analytical results are verified with the measured experimental results, and are found to be in well agreement. By adopting this proposed wireless excitation system the free actuation of the piezoelectric devices can be enabled as opposed to the confined motion for various potential applications.