Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Pulsed-field separation of particles in a microfluidic device

We demonstrate the proof-of-principle of a new separation concept for micrometer-sized particles in a structured microfluidic device. Under the action of externally applied, periodic voltage-pulses two different species of like-charged polystyrene beads are observed to simultaneously migrate into opposite directions. Based on a theoretical model of the particle motion in the microdevice that shows good agreement with the experimental measurements, the underlying separation mechanism is identified and explained. Potential biophysical applications, such as cell sorting, are briefly addressed.     

Effect of lithium intercalation on the photovoltaic performances of photovoltachromic cells

In the last few years, a new class of smart multifunctional photoelectrochemical devices has been attracting the interest of several academic institutions and industrial companies: photovoltachromic cells, combining the features of photoelectrochromic cells with those of dye‐sensitized solar cells. Here, we report the results of a detailed electrochemical analysis aiming at investigating the electrochemical behavior of these complex photoelectrochemical devices. In particular, we have been focused on the effect of Li⁺ ions displacement during the coloration of the electrochromic tungsten oxide on the performances of the photovoltaic unit. As we had previously observed striking differences between the performances of the barely photovoltaic mode (with the tungsten oxide in the bleached state) and the photovoltachromic mode (with the tungsten oxide in the colored state), we thus attempted to provide a reasonable physical interpretation to the observed phenomena. Copyright © 2013 John Wiley & Sons, Ltd.     

APU故障智能诊断系统设计

针对高旋环境下测试困难、测量精度低这一问题,提出了一种能在高旋环境下实现轴向减速装置,以达到稳定的良好的测试环境。该装置通过驱动仓内大量程陀螺仪测得的转速反馈给控制系统,控制系统输出控制信号来控制伺服电机,同时电机捷联内筒仓,使其相对外部转动方向反向旋转,实现轴向减速。实验结果表明,该装置可在高旋弹药飞行过程中提供稳定测试环境,从而得到更精准的姿态解算结果,为高旋环境下的测试提供了新的思路,具有广阔的应用前景。     

双原子正方晶格光子晶体边界模式的光传输特性

利用平面波展开法,发现双原子正方晶格光子晶体中ΓM方向边界面存在着快慢两类边界模式,并且通过计算色散关系和电场分布研究了边界参量对这两类边界模式传输特性的影响.依据两种模式的色散关系,计算了群指数和群速度色散参量,结果表明边界参量的变化对第一类边界模式传输特性的影响较小,该模式的平均群指数始终维持在5.0左右;第二类边界模式与第一类模式明显不同,边界参量的变化能够有效地影响到这种模式的传输特性,该模式的最大平均群指数可达178左右.利用时域有限差分法记录了不同时刻电场强度在边界附近的分布及监测点处的电场幅度变化情况,结果表明,两类模式都能够被限制在边界附近并向前传播,时域有限差分法得到的群速度与平面波展开法的结果完全吻合.     

Improvement in electrical and photovoltaic properties of a-Si/c-Si heterojunction with slanted nano-columnar amorphous silicon thin films for photovoltaic applications

The flat a-Si and slanted nanocolumnar (S-nC) a-Si thin films were prepared on c-Si and corning glass substrates by e-beam physical vapor deposition (EB-PVD) technique. The structural properties of all the grown thin films were determined by X-Ray Diffraction (XRD) analysis and Raman spectroscopy. Surface and cross-sectional morphology of a-Si/c-Si and S-nC a-Si/c-Si heterojunctions were investigated by Field Emission Scanning Electron Microscopy (FE-SEM). Sculptured thin films demonstrate potential for significant nanoscale applications in the area of thin film technology. The electrical and photovoltaic properties of these heterojunctions have been investigated by means of dc current–voltage (I–V) measurements at room temperature in dark and light conditions. The S-nC STFs' performance has been found to be improvable on changing the morphology of the thin film. We have found that, the porous morphology of this structure improves the photosensitivity features in photovoltaic devices and solar cell technology. We gained a high open voltage value, such as 900 mV in S-nC a-Si/c-Si thin film, without any doping process.     

A New Cells‐Compatible Microfluidic Device for Single Channel Recordings

We report the fabrication of a microfluidic apparatus and the realization of a sensors based on PEDOT : PSS, a biocompatible semiconductor polymer used in substitution of standard electrodes for electrophysiological studies and for detection of nanopores in membrane. This gives the possibility to study the mechanisms of ions balance and molecular transport though cell membranes. In particular the apparatus is based on two chambers connected through an aperture in a PTFE sheet where lipid bilayer are formed using Montal‐Mueller method, and the pore‐forming proteins activity is detected by polymeric electrodes. This methodology could be applied to examine different membrane proteins for the purpose of biosensing, drug screening and nanopore technologies.     

Effect of Particle Size on Electro-Optic Properties of Liquid Crystal Devices Doped with γ-Cyclodextrin Stabilized Barium Titanate Nanoparticles

Barium titanate stabilized by γ-cyclodextrin nanoparticles were prepared by using a microwave reactor equipped with ultrasonic nozzle mixing at 240°C in a tetraethylene glycol solution of barium ethoxide and titanium ethoxide in the presence of γ-cyclodextrin. Particles in γ-cyclodextrin-stabilized BaTiO₃ nanoparticles had an average diameter of 2.1 nm and mainly distributed within the range of about 1 to 4 nm. The γ-cyclodextrin-stabilized BaTiO₃ nanoparticles were mixed with 4-cyano-4′-pentylbiphenyl at room temperature resulting in a liquid crystal sol of 4-cyano-4′-pentylbiphenyl. The response time of liquid crystal devices in the presence of γ-cyclodextrin-stabilized BaTiO₃ nanoparticles was faster than that in the absence.     

Single‐Molecule Sensing of Environmental pH—an STM Break Junction and NEGF‐DFT Approach

Sensors play a significant role in the detection of toxic species and explosives, and in the remote control of chemical processes. In this work, we report a single‐molecule‐based pH switch/sensor that exploits the sensitivity of dye molecules to environmental pH to build metal–molecule–metal (m‐M‐m) devices using the scanning tunneling microscopy (STM) break junction technique. Dyes undergo pH‐induced electronic modulation due to reversible structural transformation between a conjugated and a nonconjugated form, resulting in a change in the HOMO–LUMO gap. The dye‐mediated m‐M‐m devices react to environmental pH with a high on/off ratio (≈100:1) of device conductivity. Density functional theory (DFT) calculations, carried out under the non‐equilibrium Green’s function (NEGF) framework, model charge transport through these molecules in the two possible forms and confirm that the HOMO–LUMO gap of dyes is nearly twice as large in the nonconjugated form as in the conjugated form.     

Optically Triggered Control of the Charge Carrier Density in Chemically Functionalized Graphene Field Effect Transistors

Field effect transistors (FETs) based on 2D materials are of great interest for applications in ultrathin electronic and sensing devices. Here we demonstrate the possibility to add optical switchability to graphene FETs (GFET) by functionalizing the graphene channel with optically switchable azobenzene molecules. The azobenzene molecules were incorporated to the GFET channel by building a van der Waals heterostructure with a carbon nanomembrane (CNM), which is used as a molecular interposer to attach the azobenzene molecules. Under exposure with 365 nm and 455 nm light, azobenzene molecules transition between cis and trans molecular conformations, respectively, resulting in a switching of the molecular dipole moment. Thus, the effective electric field acting on the GFET channel is tuned by optical stimulation and the carrier density is modulated.