X-ray photoelectron spectroscopy study of the passive films formed on thermally sprayed and wrought Inconel 625

There is a well known performance gap in corrosion resistance between thermally sprayed corrosion resistant coatings and the equivalent bulk materials. Interconnected porosity has an important and well known effect, however there are additional relevant microstructural effects. Previous work has shown that a compositional difference exists between the regions of resolidified and non-melted material that exist in the as-sprayed coatings. The resolidified regions are depleted in oxide forming elements due to formation of oxides during coating deposition. Formation of galvanic cells between these different regions is believed to decrease the corrosion resistance of the coating. In order to increase understanding of the details of this effect, this work uses X-ray photoelectron spectroscopy (XPS) to study the passive films formed on thermally sprayed coatings (HVOF) and bulk Inconel 625, a commercially available corrosion resistant Ni-Cr-Mo-Nb alloy. Passive films produced by potentiodynamic scanning to 400 mV in 0.5 M sulphuric acid were compared with air-formed films. The poorer corrosion performance of the thermally sprayed coatings was attributed to Ni(OH)₂, which forms a loose, non-adherent and therefore non-protective film. The good corrosion resistance of wrought Inconel 625 is due to formation of Cr, Mo and Nb oxides.     

Linewidth analysis of 40-GHz passively mode-locked multi-mode semiconductor lasers

An experimental analysis on the quality of 40-GHz radio-frequency signals generated by various passively mode-locked semiconductor lasers is addressed. The analysis is performed considering the frequency linewidth of 40-GHz optically generated signals and the number of longitudinal modes selected by the cavity of each laser under study. Four of these devices are multi-quantum wells InAlGaAs Fabry-Pérot lasers. They have been engineered to exhibit a specific number of longitudinal modes: 4, 5, 10, and 22 modes, respectively. Another device under test is a bulk distributed Bragg reflector laser exhibiting 3 lasing modes. The last device under study is a quantum-dash Fabry-Pérot laser characterized by 40 lasing modes. From our experimental results it appears that, regardless the nature of the device cavity and active media, the strength of the passively mode-locked mechanism might be enhanced with the number of longitudinal modes oscillating into the laser cavity, allowing a reduction in the frequency linewidth.     

Analysis of the influence of backscattered optical power over bidirectional PON links

Our aim is to describe the behavior of non-linear scattering effects that arise in standard single mode fiber (SMF), specifically scattering effects that propagate optical power in the reverse direction of the source signal such as Rayleigh Scattering (RS) and Brillouin Scattering (BS). For this purpose, the effects of backscattering phenomena over a bidirectional data transmission in a passive optical network (PON) scheme have been assessed. The impact of these high optical power components over reception at the optical line terminal (OLT) side has been determined when both links use the same wavelength. Bit Error Rate (BER) measurements have been performed with different transmission rates, using several techniques to mitigate the influence of backscattering over the received signal and considering cases with filtered and unfiltered BS.     

An effective one-axis passive packaging method for a D lens fiber collimator

An effective one-axis passive packaging method for a D lens fiber collimator is presented and compared with the traditional five-axis active packaging method. The dependence of collimator insertion loss on the gap between fiber pigtail and lens is shown experimentally to verify the packaging tolerance. In case of a 20 mm working distance, a 10 μm gap tolerance is obtained for a D lens collimator to obtain an insertion loss of <0.3 dB. In addition, a 2000 h damp heat test was carried out to demonstrate the reliability of this effective packaging method.     

Passive stabilization of a passively mode-locked Nd:GdVO4 laser by inverse saturable absorption

A diode-pumped Nd:GdVO₄ laser mode-locked by a semiconductor saturable absorber and output coupler (SESAOC) is passively stabilized to suppress Q-switched mode-locking. A phase mismatched BIBO second-harmonic generation (SHG) crystal is used for passive stabilization. The continuous wave mode-locking (CWML) threshold is reduced and the pulse width is compressed. The pulse width is 6.5 ps as measured at the repetition rate of 128 MHz.     

A novel wavelength shift keying transmitter using a pair of Mach-Zehnder modulators

A novel and simple method to achieve wavelength shift keying (WSK) modulation is proposed and experimentally demonstrated. The proposed WSK transmitter consists of a pair of Mach-Zehnder modulators (MZMs) that are biased appropriately to achieve complementary operation. When a non-return-to-zero data stream is applied to the two MZMs, thanks to the complementary operation of the MZMs, the WSK-modulated signal can be obtained by combining the two intensity-modulated optical signals. A tunable optical delay line (ODL) is applied to achieve synchronization between the two optical signals. The ODL can also be used to compensate for the dispersion-induced walk-off effect between the two optical carriers. The application of the proposed WSK transmitter in a passive optical network is demonstrated, in which the downstream WSK signal is reused as optical carrier for upstream intensity-modulated data transmission. The proposed approach is experimentally realized; experimental results verify the feasibility of the approach.     

Experimental demonstration of polarization multiplexing for simultaneously providing broadband wireless and wired access

A fiber-based wavelength-division-multiplexing (WDM) network utilizing polarization multiplexing (PolMUX) is proposed to simultaneously provide broadband wireless and wired services. In such a dual-service access network, the wireless and wired services are separately delivered in two orthogonal states of polarization with well independence in a single WDM channel. The impact of several polarization-dependent interferences becomes insignificant due to the relatively short transmission distance in access networks. The feasibility of PolMUX is experimentally demonstrated with a power penalty at BER = 10^-9 of about 0.5 dB and 1 dB for 2.5 Gb/s wired and wireless downstream services, respectively. The proposed system is compatible with the current reported techniques in either WDM passive optical networks (WDM-PON) or radio-over-fiber (ROF) systems.     

On superdiffusive behavior of a passive tracer in a random flow

In this note we consider a passive tracer model describing particle dispersion in a turbulent flow. The trajectory of the particle is given by the solution of an ordinary differential equation , , where is a divergence-free, random vector field that is spatially homogeneous and isotropic. We show that trajectories of the tracer display superdiffusive behavior when the random velocity decorrelates, at large distances, but does it not rapidly but rather at some moderate rate. The main tools used in the proofs are variational principles and Tauberian-type theorems.     

波长共享的WDM无源光网络媒质接入控制算法及其性能分析

结合波长分配和前跳虚时钟算法,提出了一个基于连接的WDM无源光网络媒质接入控制算法.通过理论和仿真,分析了此算法的延时保证和公平性.     

基于100 m色散位移光纤的超连续谱实验研究

利用被动锁模掺铒光纤激光器输出的重复频率13.9 MHz、中心波长1557.28 nm的光脉冲作泵浦源,在100 m的色散位移光纤中产生总宽度达488 nm的超连续谱,不平坦度小于±3.0 dB,利用法布里-珀罗滤波器获得163路多波长脉冲,利用可调谐滤波器得到C波段内脉宽为1.2～2.0 ps的近变换限超短光脉冲.分析了泵浦脉冲的功率、光纤长度等因素对SC光谱展宽的作用,并与色散平坦光纤和较长的色散位移光纤作了比较.