复杂目标近场电磁散射的可视化计算方法

首次介绍了复杂目标近场散射计算的可视化方法。采用非均匀有理Ｂ样条曲面（ＮＵＲＢＳ）精确构造任意形状散射体，结合几何体近场透视变换和Ｚ－Ｂｕｆｆｅｒ技术实现了基于Ｗｉｎｄｏｗｓ平台的近场散射计算。提出广义雷达散射截面的概念并给出的若干算例。该方法充分利用了计算机３Ｄ图形设备的几何运算能力，运算速度快，严谨高，可扩展性好。     

具有多重PRF的雷达回波脉冲视频仿真电路的实现

在目标回波仿真原理的基础上，给出了一种新颖的脉冲多普勒雷达目标回波视频频脉冲仿真电路。通过计数分频和计数延时技术，该电路获得了大范围可变的脉冲重复频率和高精度的脉冲时延，能对距离不断变化的动目标进行实时模拟。给出了电路的结构框图，并对设计原理作了必要说明。     

Vibration analysis of a beam with PCLD Patch

An analytical approach for vibration response analysis of a beam with single passive constrained layer damping (PCLD) patch is presented. The governing equation of motion of the beam is firstly derived on the basis of an energy approach and the Lagrange equation. The noval contribution is that a third admissible function is introduced to represent the longitudinal displacements of the constraining layer in the PCLD patch when the assumed-modes method is applied for discretizing the governing equation. In conventional analytical approaches, only two admissible functions are used together with a longitudinal static equilibrium equation of a section of base beam or constraining layer. Comparison of the computational results from the proposed analytical approach and the conventional analytical approach as well as a commercial FEM code reveals that the proposed analytical approach can describe the vibration responses of the damped beam more accurately for commonly used viscoelastic material (VEM) layer in the PCLD patch while the conventional analytical approach, in general, overestimates the damping effects of the PCLD patch. The advantages and disadvantages of the proposed analytical approach and conventional analytical approach are discussed through some case studies.     

组织协同进化分类算法用于雷达目标一维像识别

针对雷达目标一维像识别问题，提出了一种基于组织协同进化分类算法的识别方法．该方法与现有进化分类方法的不同之处在于它的进化操作直接作用于样本而不是规则，采用了一种自下而上的搜索机制，即先使若干样本的集合得到进化，再从进化结果中提取规则．这样有利于避免在进化过程中产生无意义的规则．该方法不需要进行特征提取；对于高维数据，不需要预先进行降维处理；没有复杂的运算，训练和识别的速度都很快．对3种飞机微波暗室实测数据的识别实验表明，该方法性能稳定，优于基于支撑矢量机与子波核函数的方法，识别率均达到了96％以上．实验中还对算法的抗噪能力进行了测试，获得了良好的效果．     

Analysis of Resolution of Bistatic SAR

In this paper, the spatial resolutions at different directions of bistatic synthetic aperture radar （BiSAR） have been derived from the ambiguity function. Compared with monostatic signal to noise ratio, BiSAR＇s resolutions of a fixed point target are varying with slow time since BiSAR system is space-variant. Constraints for the assumption of space-invariant bistatic topology are proposed in the paper. Moreover, under the assumption of invariance, the change of resolutions at different point in the image scene is taken into account, and we have specified two key parameters that affect resolutions directly and analyzed the way how they influence on the resolutions.     

基于悬臂梁调谐技术的光纤光栅无源振动监测

采用匹配光纤光栅设计了一种结构简单的振动信号无源监测装置.该装置利用悬臂梁调谐技术能够将微小振动信号转化为光电探测器可探测的光强信号,利用示波器实现实时监测.实验中对振幅为3mm的简谐振动信号进行了监测,测量结果与振动频率一致,可测量7～20Hz的振动,信噪比不低于14.9dB.监测频率受限是因为悬臂梁的性质,如采用金属材料或者采用齿轮组对转子进行减速,该装置可探测更高的频率.     

红外单站被动定位技术速度更新算法研究

针对红外单站被动定位技术中空中机动目标的运动速度不断变化这一实际情况,提出了一种基于红外相机运动特性的对目标的运动速度进行实时更新的校正算法.该算法克服了大多基于匀速直线运动这一空间模型的红外单站被动定位方案目标速度不变的缺点,客观地反映了空中机动目标的实际运动状况,不仅能对目标的运动速度进行实时准确的更新校正,而且可推演出一种新的红外单站被动定位算法,对推动红外单站被动定位技术的工程实用化进程具有重要的意义.     

Indoor radon measurements in dwellings of four Saudi Arabian cities

An indoor radon survey of a total of 269 dwellings, with one dosimeter per house, distributed in four Saudi Arabian cities was carried out. The objective of this survey was to carry out indoor radon measurements of two cities in the Eastern Province, Khafji and Hafr Al-Batin and to compare this with two cities in the Western Province, Al-Madina and Taif. The survey provides additional information about indoor radon concentrations in Saudi Arabia. The results of the survey in these cities showed that the overall minimum, maximum and average radon concentration were 7,137 and 30 Bqm⁻³, respectively. The lowest average radon concentration (20 Bqm⁻³) was found in Hafr Al-Batin, while the highest average concentration was found in Khafji (40 Bqm⁻³).     

基于FPGA+POWERPC(VIRTEX-II PRO)的雷达数字伺服控制系统

VIRTEX IIPRO是美国Xilinx公司最新一代的FPGA产品,内嵌了IBM的POWERPC405,它的功能十分强大、扩展性能优越,在工业和军用设备中有着很好的应用前景。本文对该芯片的特点进行了简单介绍,并介绍了一种基于FPGA+PPC为核心的雷达数字伺服控制系统。     

对炮位侦校雷达精度评价的探讨

当前炮位侦校雷达精度评价存在两种计算方法，通过分析这两种精度计算方法的原理，就如何选用计算方法对雷达精度进行合理评价等问题进行了探讨，并在实践运用效果的基础上对提高产品研制质量提出了建议。