光纤臂长差对马赫-曾德尔型光纤陀螺的影响

介绍了基于马赫-曾德尔干涉原理和萨格奈克(Sagnac)效应的马赫-曾德尔型光纤陀螺(MZ型光纤陀螺)的工作原理.在此基础上,分析了两光纤臂长差对光纤陀螺零位漂移和温度稳定性的影响,指出臂长差的存在是影响MZ型光纤陀螺系统稳定性和灵敏度的最主要因素.     

Modified null field method for P- and SV-wave scattering from a partially debonded fiber

The modified null field approach to elastic P- and SV-wave scattering (in plane strain) from a partially debonded fiber has been developed. The debonded region on the fiber surface is subjected to traction free boundary conditions, whereas the fiber is assumed to be in welded contact with the host medium elsewhere. Additional null field equations for an elliptical extension of the actual surface of the scatterer are introduced which require additional expansions for the field in the region between the extended mathematical boundary and the actual boundary of the scatterer. The numerical accuracy of the modified null field method has been tested for the case of a perfectly bonded fiber for P- and SV-wave incidence. Scattering cross-section plots are presented for different degrees of debonding.     

Dynamics of the Up-Conversion Emission in Holmium Doped Zblan Fiber

The dynamics of up-conversion, green emission under excitation at different infra-red wavelength in Ho^3? doped ZBLAN fiber is reported. Under infrared, 890 nm quasi cw pumping the complicated temporal behavior of the up-conversion signal is strongly influenced by the intermediate ⁵I₅ state cross relaxation. The mechanisms of the observed up-conversion processes are proposed and the time evolution of the ⁵S₂ population is described by the rate equation model. Parameters of the model are determined and numerical simulations of the excited state dynamics are performed.     

铁通公司FTTH发展与建设思考

本文从FTTH发展思路、应用场景、建设模式等方面进行阐述,并对铁通公司FTTH下一步发展提出4点建议。     

Anti‐static Agent Containing Zinc Oxide and its Modification for PA6 Fiber

A new anti‐static agent was synthesized from zinc oxide‐adipic acid‐polyethylene glycol and caprolactam by three‐step reactions. The antistatic agent (called poly(ether ester amide zinc oxide) or PEEAZ) was analyzed by IR and DSC. The results showed that zinc oxide existed in the main chain of PEEAZ. The glass temperature and melt temperature of poly(ether ester amide zinc oxide) (referred to as PEEAZ in the following) decreased with increasing poly(ether ester zinc oxide) increasing in PEEAZ. Antistatic PA6 fiber was obtained by adding PEEAZ 2–8% (wt/wt) to PA6 during blend spinning. The specific resistance and the static half‐value period of PA6 fiber was less than 10⁹Ω · cm and 60 sec, respectively. Excellent antistatic property remained after being washed 30 times.     

Modification and Application of Poly(Ethylene Terephethalate) Nonwoven Fiber Using Octadecyl Acrylate and Acrylic Acid as Oil Sorbers

Three series of crosslinked octadecyl acrylate and acrylic acid copolymers were prepared through suspension copolymerization based on acrylic acid content (10, 30, 50%wt. ratio). Divinyl benzene (DVB) was used as a crosslinker with different weight ratios (1, 4 and 10%). Isopropyl alcohol or dioctyl phthalate and methyl benzoate were used as two different reaction solvents in the presence of ABIN as initiator. The prepared crosslinked copolymers were characterized by SEM, TGA and FTIR spectroscopic analyses. The prepared polymers were coated onto poly(ethylene terephethalate) nonwoven fiber (NWPET). The effect of copolymerization feed composition, crosslinker wt% and reaction media or solvent on swelling properties of crosslinked polymers were studied through the oil absorption tests in toluene and 10% of diluted crude oil with toluene. It was noticed that the maximum swelling of crosslinked copolymers was increased from 30 to 100 g/g after grafting of copolymers onto NWPET.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

改进的PCVD工艺制造高掺硼材料的性能研究

介绍了一种用于制造光纤的高掺硼石英材料的性能.简单回顾基本的工艺条件和关键工艺参数之后,主要讨论材料性能,如玻璃结构、折射率、粘度、热膨胀系数和残余应力等.另外还介绍了两种高掺硼光棒的性能.     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。