RO-heparin Inhibits L-Selectin-mediated Neutrophils Adhesion to Vascular Endothelium Under Flow Conditions

Introduction Migrationandrecruitmentofleukocytesfromblood toinflammatorylesionsitesaresequentiallyregulated byadhesionmoleculesandtheirreceptors[1].These lectinfamilyplaysamajorroleininitiatingattachement ofneutrophilstotheactivatedendothelium.P selectin,…     

Optimal vaccine scheduling in cancer immunotherapy

Cancer immunotherapy aims at stimulating the immune system to react against cancer stealth capabilities. It consists of repeatedly injecting small doses of a tumor-associated molecule one wants the immune system to recognize, until a consistent immune response directed against the tumor cells is observed.

We have applied the theory of optimal control to the problem of finding the optimal schedule of injections of an immunotherapeutic agent against cancer. The method employed works for a general ODE system and can be applied to find the optimal protocol in a variety of clinical problems where the kinetics of the drug or treatment and its influence on the normal physiologic functions have been described by a mathematical model.

We show that the choice of the cost function has dramatic effects on the kind of solution the optimization algorithm is able to find. This provides evidence that a careful ODE model and optimization schema must be designed by mathematicians and clinicians using their proper different perspectives.     

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

PARADOXICAL EFFECT OF A GnRH AGONIST ON STEROIDOGENESIS IN CULTURED MONKEY GRANULOSA CELLS

In this study we demonstrate: (i) The GnRH agonist exerts a direct dose-dependet stimulative effect on the aromatase activity and progesterone production in cultured monkey granulosa cells; (ii)the stimulative effect on steroidogenesis can be completely blocked by concomitant treatment with a GnRH antagonist, suggesting that the actions of GnRH are mediated through stringent stereospecific recongnition sites; (iii) in addition to the stimulative effect, the GnRH agonist in the presence of gonadotropins also exerts an inhibitory effect, even though the peptide by itself is more effective in the stimulation of steroidogenesis, and the stimulation of gonadotropin on steroidogenesis could be gradually restored by decreasing the concentration of the GnRH agonist in the culture; and (iv) paradoxical effect can also be observed in the presence of cAMP-inducing agents, suggesting that the inhibitory action of the peptide on gonadotropin-induced steroidogenesis is localized at a step distal to the stringent reco     

The electronic structure of the interface between thin conjugated oligomer films and inorganic substrates with different work function

In this work, a comparison of the interfacial electronic properties between a semiconducting oligomer and a variety of substrates with different properties—metal, semiconductor and oxide layers—is reported. The interface formation was studied by X-ray and Ultraviolet photoelectron spectroscopies (XPS, UPS). High purity oligomer films with thickness up to 10 nm were prepared by stepwise evaporation on the clean substrates under ultrahigh vacuum (UHV) conditions. Analysis of the oligomer and substrate related XPS spectra clarified the interfacial chemistry and band bending in the semiconducting materials. The valence band structure and the interfacial dipoles were determined by UPS. The barriers for hole injection were measured at the interfaces of the organic film with all substrates. The interfacial energy band diagrams were deduced in all cases from the combination of XPS and UPS results. Emphasis was given on the influence of the substrate work function (eΦ) on the electronic properties of these interfaces.     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

The epitaxial sexiphenyl (0 0 1) monolayer on TiO2(1 1 0): A grazing incidence X-ray diffraction study

A para-sexiphenyl monolayer of near up-right standing molecules (nominal thickness of 30 Å) is investigated in-situ by X-ray diffraction using synchrotron radiation and ex-situ by atomic force microscopy. A terrace like morphology is observed, the step height between the terraces is approximately one molecular length. The monolayer terraces, larger than 20 μm in size, are extended along the [0 0 1] direction of the TiO₂(1 1 0) substrate i.e. along the Ti-O rows of the reconstructed substrate surface. The structure of the monolayer and its epitaxial relationship to the substrate is determined by grazing incidence X-ray diffraction. Extremely sharp diffraction peaks reveal high crystalline order within the monolayer, which was found to have the bulk structure of sexiphenyl. The monolayer terraces are epitaxially oriented with the (0 0 1) plane parallel to the substrate surface (out-of-plane order). Four epitaxial relationships are observed. This in-plane alignment is determined by the arrangement of the terminal phenyl rings of the sexiphenyl molecules parallel to the oxygen rows of the substrate.     

Correlated and non-correlated growth kinetics of pentacene in the sub-monolayer regime

We present a study of the growth kinetics of pentacene monolayer islands on SiO₂ in the submonolayer regime by using Atomic Force Microscopy (AFM). Two distinct growth modes, namely correlated growth (CG) and non-correlated growth (NCG), have been identified by Voronoi tesselation. These two modes are characterized by different island growth kinetics. In the case of correlated growth, the average island size 〈A〉 scales with deposition time t i.e. 〈A〉 ∝ t whereas for non-correlated growth, 〈A〉 ∝ t². The CG and NCG regimes are defined by the level of re-evaporation which determines the capture zones around the islands: Wigner-Seitz cells for CG and coronas of width λ_D (λ_D is the mean diffusion distance on SiO₂ before re-evaporation) for NCG. A simple model is proposed to reproduce the experimental growth kinetics in both modes.     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

Modeling of environmentally significant interfaces: Two case studies

When some parameters cannot be easily measured experimentally, mathematical models can often be used to deconvolute or interpret data collected on complex systems, such as those characteristic of many environmental problems. These models can help quantify the contributions of various physical or chemical phenomena that contribute to the overall behavior, thereby enabling the scientist to control and manipulate these phenomena, and thus to optimize the performance of the material or device. In the first case study presented here, a model is used to test the hypothesis that oxygen interactions with hydrogen on the catalyst particles of solid oxide fuel cell anodes can sometimes occur a finite distance away from the triple phase boundary (TPB), so that such reactions are not restricted to the TPB as normally assumed. The model may help explain a discrepancy between the observed structure of SOFCs and their performance. The second case study develops a simple physical model that allows engineers to design and control the sizes and shapes of mesopores in silica thin films. Such pore design can be useful for enhancing the selectivity and reactivity of environmental sensors and catalysts. This paper demonstrates the mutually beneficial interactions between experiment and modeling in the solution of a wide range of problems.