Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact.

A new type of bottom‐emission electroluminescent device is described in which a metal oxide is used as the electron‐injecting contact. The preparation of such a device is simple. It consists of the deposition of a thin layer of a metal oxide on top of an indium tin oxide covered glass substrate, followed by the solution processing of the light‐emitting layer and subsequently the deposition of a high‐workfunction (air‐stable) metal anode. This architecture allows for a low‐cost electroluminescent device because no rigorous encapsulation is required. Electroluminescence with a high brightness reaching 5700 cd m^–2 is observed at voltages as low as 8 V, demonstrating the potential of this new approach to organic light‐emitting diode (OLED) devices. Unfortunately the device efficiency is rather low because of the high current density flowing through the device. We show that the device only operates after the insertion of an additional hole‐injection layer in between the light‐emitting polymer (LEP) and the metal anode. A simple model that explains the experimental results and provides avenues for further optimization of these devices is described. It is based on the idea that the barrier for electron injection is lowered by the formation of a space–charge field over the metal‐oxide–LEP interface due to the build up of holes in the LEP layer close to this interface.     

Organic Electroluminescent Thin Film Using 8—hydroxyquinoline Zinc as Emitting Layer

Organic electroluminescent thin film using Znq2(Znq2) as the emitting layer material with structure of glass/ITO/Znq2/Al(cell) was fabricated.The V-I curve ,V-B curve and electroluminescent spectra of the cell were measured.Meanwhile the fluorescent spectra, excited spectra and absorption spectra of Znq2 with power and film states were also measured.     

The epitaxial sexiphenyl (0 0 1) monolayer on TiO2(1 1 0): A grazing incidence X-ray diffraction study

A para-sexiphenyl monolayer of near up-right standing molecules (nominal thickness of 30 Å) is investigated in-situ by X-ray diffraction using synchrotron radiation and ex-situ by atomic force microscopy. A terrace like morphology is observed, the step height between the terraces is approximately one molecular length. The monolayer terraces, larger than 20 μm in size, are extended along the [0 0 1] direction of the TiO₂(1 1 0) substrate i.e. along the Ti-O rows of the reconstructed substrate surface. The structure of the monolayer and its epitaxial relationship to the substrate is determined by grazing incidence X-ray diffraction. Extremely sharp diffraction peaks reveal high crystalline order within the monolayer, which was found to have the bulk structure of sexiphenyl. The monolayer terraces are epitaxially oriented with the (0 0 1) plane parallel to the substrate surface (out-of-plane order). Four epitaxial relationships are observed. This in-plane alignment is determined by the arrangement of the terminal phenyl rings of the sexiphenyl molecules parallel to the oxygen rows of the substrate.     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.     

若干具有[(PO4)2Mo5O15]簇骼的化合物的光谱研究

本文对所合成的具有 [(PO4 ) 2 Mo5O1 5]簇骼的 3种新颖的有机 磷钼酸盐簇合物(NH3CH2 CH2 NH3) 2 5[(PO4 ) (HPO4 )Mo5O1 5]·7 5H2 O (Ⅰ ) ,(H3NCH2 CH2 NH3) 3·[(PO4 ) 2 Mo5O1 5]·3H2 O (Ⅱ )和(H3NCH2 CH2 NH3) 2 ·[Cu(en) ][(PO4 ) 2 Mo5O1 5]·5H2 O (Ⅲ )用FTIR ,NIR Raman ,紫外 可见漫反射光谱 (UV VisDRS)和荧光光谱等研究手段 ,对其进行光谱研究 ,探讨其结构和性能的关系。在这些化合物中 ,化合物Ⅰ和Ⅱ具有孤立的 [(PO4 ) 2 Mo5O1 5]簇骼基元 ,而化合物Ⅲ的 [(PO4 ) 2 Mo5O1 5]簇骼基元是由 [Cuen]基团桥联成链 ;磷钼酸盐的特征振动频率和这些化合物的结构相关 ;UV VisDRS显示 ,在 2 0 0和 2 6 0nm左右有两个杂多化合物的特征吸收谱带 ;化合物的稳态荧光光谱中 ,观察到以 2 4 0nm激发 ,在大约 4 0 0nm附近出现的由金属氧簇Oμ→Mo跃迁激发所引起的较强的发射峰 ,在化合物 (Ⅲ )中 ,还观察到通过 [Cuen]的荷移跃迁的以 5 70nm激发所产生的 6 0 4nm的发射峰。     

Electroluminescence from phenylenevinylene-based polymer blends

The electroluminescent behaviour of films of poly(phenylphenylenevinylene) (PPPV), of PPPV blended with polystyrene (PS) and of PS doped with oligo(phenylenevinylene) sandwiched between indium–tin oxide (ITO) and Al contacts has been investigated. Polymer blending increases the relative quantum efficiency by up to two orders of magnitude. Studying the cell performance under application of rectangular voltage pulses as a function of temperature indicates that (i) hole injection at the ITO contact occurs by tunnelling, (ii) tunnel injection of electrons at the cathode is promoted by a space charge field across an interfacial Al₂O₃ layers and (iii) leakage of holes through the cathodic barrier is the main loss mechanism for holes.     

原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析

原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析谢志海，郎惠云，高云（西北大学化学系，西安，７１００６９）关键词：氢氰酸，测定，原子吸收光谱香烟中的尼古丁，烟焦油等含氮有机物燃烧后将产生氢氰酸，吸入人体后极为有害。国外在这方面的研究始于七十年代，...     

集化学家与化学教育家于一身的一代化学大师李比希--纪念李比希诞辰200周年

在德国著名化学家李比希诞辰200周年之际，对这位集化学家与化学教育家于一身的一代化学大师对科学和科学教育以及人类社会作出的贡献进行了评述。     

8-羟基喹啉对甲基苯酚合锌配合物的合成及光致发光和电致发光性能

有机电致发光 ( EL )技术作为一种有着广阔应用前景的显示技术 ,自 1 987年 [1] 以来已获得了空前迅速的发展 .部分发光器件的亮度、效率和寿命已经达到或接近实用化的程度 .许多有机化合物 [2～ 5] ,包括小分子和聚合物 ,已被用于制备有机 LEDs.应用于有机 EL的化合物很多 ,这为优化和筛选优秀的 EL材料提供了基础 .以 8-羟基喹啉铝为代表的有机金属配合物是一类重要的有机 EL材料 ,这类材料荧光效率高、易于提纯且性质比较稳定 .目前应用于有机 EL金属配合物的发光材料大多配位数均为偶数 ,四配位的 8-羟基喹啉锌配合物 ( Znq2 ) [6…