Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

A Polymeric Iodiplumbate(Ⅱ) Templated by Conjugated Quaternary Ammonium: Synthesis, Band Structure and Optical Properties

A new lead(Ⅱ) iodide coordination polymer [(npq)(PbI3)]n 1 (npq = N-propyl- quinolinium) has been synthesized in the presence of npq as structure-directing reagent (SDA). Compound 1 crystallizes in the orthorhombic system, space group Pbca, with a = 19.158(4), b = 7.9909(16), c = 22.929(5) (A), V = 3510.2(12) (A)3, Z = 8, Dc = 2.877 g/cm3, F(000) = 2672, C12H14I3NPb, Mr = 760.14, μ(MoKα) = 14.872 mm-1, the final R = 0.0431 and wR = 0.1021 for 3678 observed reflections with I＞2σ(I). Structure determination indicates that the [PbI3]-n infinite chains in each unit cell shape the sketch of 1, which could be described as the result of face-sharing distorted PbI6 octahedra running along the b axis. Electrostatic interaction between conjugated organic counter-cations and inorganic moieties presents and contributes to the crystal packing. 1 was further characterized with IR and elemental analysis. Based on the crystal structure data, quantum chemical calculation with DFT method was used to reveal the electronic structure and optical property of 1.     

格栅-空腔自激振荡流场扰动形成机理研究

格栅-空腔流动会引发流场自激振荡现象,产生结构振动及噪声问题.研究此类现象的形成机理对相关设备的减振降噪设计具有重要意义.目前已知这种现象是在流场正逆向两种扰动的耦合作用下形成的,但上述两种扰动的形成机理尚未明确.针对该问题,建立了格栅-空腔流动数值模型,并进行非稳态数值模拟.通过分析压力振荡数据及流场结构演化过程,对...     

石墨基液流电池复合双极板

液流电池是一种安全性高、使用寿命长、可扩展的大规模储能系统,可以协助电网调峰储能,提高能源利用率,发展前景广阔。双极板是液流电池的重要组成部分。功能上起到了分隔、串联电池、传导电流、为电堆提供结构支撑等作用。从成本构成角度看,双极板的价格占电堆成本的比重也较大。开发高性能、低成本的双极板对加快液流电池的商业化应用具有重要意义,也是目前业界的迫切需求。虽然文献上报道了许多针对液流电池双极板开发的工作,但是目前高性能、低成本的液流电池双极板产品仍无法充分满足市场需求。本文着重介绍了石墨基复合双极板的研究现状,介绍了材料选择、工艺流程对关键性能的影响,对相关工作进行了评述,并为液流电池双极板的开发提出了建议。     

Fe3+-H2O2-Rh6G化学发光体系测定水中的邻苯二酚

酚类化合物对于人体及其他生物的毒性较大,邻苯二酚作为一种重要的有机化工原料和中间体,在农业、染料、香料、橡胶、医药、感光材料等领域具有广泛的应用。因此监测废水中邻苯二酚的含量是控制水环境质量的一个重要指标。目前测定邻苯二酚的方法主要有光度法[1,2],原子吸收法[     

微流控层流技术的研究

基于微型通道自身的层流特点而发展起来的多相层流技术,从最初的液-液微萃取开始,由于其结构加工简单、操作方便和分析功能强大,已逐渐发展成为一种加工分析方法,为微流控分析的研究应用打开了一个崭新的局面。本文概述了层流的基本原理,总结了近10年来在这方面的研究,包括层流界面间的分子扩散、转移现象和化学反应,以及层流刻蚀加工技术及其在制备纳米材料和在生命医学方面的应用。具体介绍了应用层流技术进行微芯片的加工制作,微型反应器的制备,离子、分子的分离分析,聚合物薄膜的形成和应用,微通道内有机合成反应的控制,溶液的浓度梯度控制以及在免疫检测中的应用,对细胞、生物大分子的操作控制,以及对生物试剂的预处理分析等。     

流动注射双安培法测定多巴胺

通过偶合多巴胺在铂电极上的氧化和高锰酸钾在铂电极上的还原,建立了一个不施加电压的条件下的流动注射双安培法直接测定多巴胺的新方法。以0.05 mol/L硫酸为载液,多巴胺的氧化峰电流与其浓度在0.8~160 mg/L范围内呈线性关系,线性回归方程为i(nA)=652.9C-239.2(r=0.9998,n=10),检出限为0.2 mg/L;RSD为2.86%(N=80 mg/L,n=14);进样频率为80次/h。本方法具有很高的选择性和灵敏度,样品处理方法简单快速,适于连续自动测定。用于实际样品的测定,结果满意。     

Mutation scanning-coupled analysis of haplotypic variability in mitochondrial DNA regions reveals low gene flow between human and porcine Ascaris in endemic regions of China

Haplotypic variation within and among the Ascaris populations representing six provinces in China was investigated. Mitochondrial DNA regions in the cytochrome c oxidase subunit 1 (cox1) and NADH dehydrogenase subunit 1 (nad1) genes were amplified by PCR from total genomic DNA samples (n > 720) from Ascaris individuals from humans and pigs, and subjected to mutation scanning and subsequent selective sequencing. For the cox1, ten different electrophoretic profiles were recorded for human Ascaris, and the same number for pig Ascaris, one of them being common to both host species. For the nad1, 11 different profiles were detected for human Ascaris, and 15 for pig Ascaris. Having defined all haplotypes (20 for pcox1 and 26 for pnad1) by sequencing, their frequencies were estimated in each of the two host species and each of the six provinces. For each mitochondrial region, the frequency of the different haplotypes varied considerably, depending on host species and geographical origin. Analysis of the sequence data (representing all haplotypes for each mitochondrial locus) by F-statistics indicated restricted gene flow between human Ascaris and pig Ascaris, and supported the conclusions from previous molecular epidemiological investigations that pigs are not a significant source of Ascaris infection in humans in endemic regions.     

Comparative analysis of bias in the collection of airborne pollutants: Tests on major aromatic VOC using three types of sorbent-based methods

This study was undertaken to establish one of the most reliable sampling methods and to precisely evaluate the bias involved in the collection of airborne pollutant samples. For the purpose of our study, we investigated the performance of three different types of sampling techniques by measuring major aromatic volatile organic compounds (VOC) in outdoor air; the target analytes specifically include benzene, toluene, ethylbenzene, and xylene (commonly called BTEX). As the first step of our approach, we designed and developed a multi-channel sampling system consisting of a six-port mass flow controller (SJU-MFC) system. Because this system allowed the collection of up to six replicate samples, our measurement results were analyzed and screened statistically for the derivation of high-quality BTEX data. The feasibility of this sampling system was further tested through a comparison with concurrent measurement data sets obtained by two additional, but independent, sampling techniques: (1) automatic continuous sampler (ACS) and (2) on-line GC (O-GC) system. Based on the data sets collected concurrently by three different sampling methods, we attempted to evaluate the compatibility of sampling techniques. Although the results obtained by SJU-MFC system were not statistically different from those of the O-GC system, they were moderately distinguishable from those of ACS. Such patterns were seen consistently, when examined by correlation analysis. The overall results of our study thus generally point out that the compatibility of data sets, when the proper caution is taken, improve significantly among different sampling methodologies.