All optical switching in semiconductor microresonators based on pattern selection

We present here a method for selecting optical patterns in a passive semiconductor microresonator, by using a spatial perturbation. A pattern is spontaneously generated in the system, and a switching beam causes this pattern to rotate even if the power in the switching beam is much lower than the power in the pattern. Thus, an all optical switch is realized, that operates at low light levels.     

The Decay of Massive Scalar Field in Non-Static Gödel Type Universe with Viscous Fluid and Heat Flow

In this study, we have investigated the dynamics of non-static Gödel type rotating universe with massive scalar field, viscous fluid and heat flow in the presence of cosmological constant. For various cosmic matter forms, the behavior of the cosmological constant (Λ), shear (η) and bulk (ξ) viscosity coefficients and other kinematic quantities have studied in the early universe. We have showed the decay of massive scalar field in the non-static rotating Gödel type universe and we have obtained constant scalar field with and without source density. Also, we have investigated the effects of massive scalar field on the matter density and pressure. From solutions of the field equations, we have a cosmological model with non-zero expansion, shear, heat flux and rotation. Also some physical and geometrical aspects of the model discussed.     

Optical bistability at angular incidence in a one-dimensional photonic crystal containing single negative materials

Nonlinear wave propagation is studied theoretically in a one-dimensional photonic band gap structure containing single negative materials. It is found that Kerr nonlinearity is greatly enhanced near the lower edge of a recently explored angular gap for transverse magnetic polarized light. Consequently, optical bistability is achieved at very low values of input intensity in a periodic structure composed of only a few repeating units. The characteristics of optical bistability are affected only slightly with the variation of the incident angle and thickness ratio of the layers. The effect of losses is also found to be relatively insignificant in such a small structure.     

A photonic wire-based directional coupler based on SOI

A photonic wire-based directional coupler based on SOI was fabricated by e-beam lithography (EBL) and the inductively coupled plasma (ICP) etching method. The size of the sub-micron waveguide is 0.34 μm × 0.34 μm, and the length in the coupling region and the separation between the two parallel waveguides are 410 and 0.8 μm, respectively. The measurement results are in good agreement with the results simulated by 3D finite-difference time-domain method. The transmission power from two output ports changed reciprocally with about 23 nm wavelength spacing between the coupled and direct ports. The extinction ratio of the device was between 5 and 10 dB, and the insertion loss of the device in the wavelength range 1520-1610 nm was between 22 and 24 dB, which included an about 18.4 ± 0.4 dB coupling loss between the taper fibers and the polished sides of the device.     

Electrochemical and Scalable Dehydrogenative C(sp3)−H Amination via Remote Hydrogen Atom Transfer in Batch and Continuous Flow

A hydrogen atom transfer-directed electrochemical intramolecular C−H amination has been developed in which the N-radical species are generated at the anode, and the base required for the reaction is generated at the cathode. A broad range of valuable pyrrolidines were prepared in good yields and with high chemoselectivity. The reaction was easily scaled up in both batch and continuous flow systems.     

A plasma-fluid model for EHD flow in DBD actuators and experimental validation

A numerical method to simulate plasma induced electrohydrodynamic flow is proposed in this study. The numerical model consists of three components. Firstly, a potential module to simulate temporal potential and electric field generated in the ionized fluid. Secondly, a plasma module to simulate plasma development and charge particle densities. Finally, a fluid module to simulate the flow affected by the body forces induced by the movement of the charged particles. Fluid flow is modeled using modified predictor-corrector strategy as proposed in the marker and cell method. The velocity field was corrected to achieve incompressible flow by calculating pressure correction factors, considered in all cells. Numerical convergence and time sensitivity analysis were carried to confirm grid independence and determine an efficient time step for simulations. Numerical computations are validated by comparing with experimental results of discharge currents and current densities. They were found to be in very good agreement thus providing an extensive validation. Furthermore, quiescent flow over a dielectric barrier discharge actuator is simulated in the this study, using the proposed plasma-fluid model, to model flow evolution and resolve temporal flow features for detailed analysis. The streamline and vorticity plots were analyzed and compared with experimental results, and flow results were found to be in-line with the experiments.     

A divergence-conforming hybridized discontinuous Galerkin method for the incompressible Reynolds-averaged Navier-Stokes equations

We present a hybridized discontinuous Galerkin (HDG) method for the incompressible Reynolds-averaged Navier-Stokes equations coupled with the Spalart-Allmaras one-equation turbulence model. The method extends upon an HDG method recently introduced by Rhebergen and Wells for the incompressible Navier-Stokes equations. With a special choice of velocity and pressure spaces for both element and trace degrees of freedom (DOFs), the method returns pointwise divergence-free mean velocity fields and properly balances momentum and energy. We further examine the use of different polynomial degrees and meshes to see how the order of the scalar eddy viscosity affects the convergence of the mean velocity and pressure fields, specifically for the method of manufactured solutions. As is standard with HDG methods, static condensation can be employed to remove the element DOFs and thus dramatically reduce the global number of DOFs. Numerical results illustrate the effectiveness of the proposed methodology.     

Effective Application of Microwave Resonant Cavity System to Flow Chemistry

By applying advanced telecommunication solid state devices to microwave (MW) resonant cavity system for flow chemistry, it becomes possible to heat up low polarity solvents higher than 250 C, that are considered impossible to heat up by MW until now. The resonant cavity system is opening new process windows to production processes of specialty chemicals which require low cost, high yield and high productivity.     

Flow dynamics in the short asymmetric Taylor-Couette cavities at low Reynolds numbers

This paper reports on the numerical investigations of Taylor-Couette flow of radius ratio η = 0.25–0.6 performed at low Reynolds numbers Re = 100–200. The inner cylinder and the bottom end-wall rotate, while the outer cylinder and the top end-wall are held fixed. A fully 3D DNS code based on the spectral Chebyshev – Fourier approximation is used. This study is complementary to those of Mullin and Blohm (Phys. of Fluids 2001, vol 13, 136–140) and Lopez et al. (J. Fluid Mech. 2004, vol 501, 327–354) where investigations have been performed for radius ratio 0.5. The 1-cell and 3-cell structures found by these authors are shown to exist for a wide range of radius ratios, and the transition processes between them are qualitatively similar. These structures show hysteresis, disappearing at saddle-node bifurcations which connect at a cusp point in the (Re, Γ) plane. This cusp exists for the entire range of 0.1 < η < 0.75, and it traces out a parabolic curve in the (Re, Γ) plane, reaching a minimum Re at η = 0.375. The detailed 3D DNS computations provide a lot of new information about such phenomena as the modulated rotating wave, the period doubling cascade and homoclinic collision. The results show that the period doubling bifurcation is important in the flow when the radius ratio is close to η = 0.375.     

水流损失和热补偿共同作用对增强型地热系统(EGS)产能影响的研究

基于青海共和盆地-3705m地热田实测数据,结合流固耦合传热理论并运用Comsol软件,建立了离散型裂隙岩体流体传热模型。考虑水流损失和热补偿共同作用,模拟得到了开采过程中上、下岩层(盖层和垫层)为绝热不渗透、传热不渗透、渗透传热时,储层(上、下岩层和压裂层)温度场的变化特征,分析了产出流量、水流损失、产出温度、产热速率的变化规律。研究结果表明:采热过程中产出流量始终小于注入流量;产出流量增幅速率先增大后减小,最后趋于稳定,前3a产出流量增幅超过总增幅量的3/4;忽略水流损失,将高估产热速率,采热初期甚至达到考虑水流损失时产热速率的3倍以上;考虑水流损失,产热速率呈先快速上升再趋于稳定后逐渐下降的趋势,最优开采时间为3a^11a;研究上、下岩层对产出温度的影响,仅考虑传热,采热寿命延长5.43%,同时考虑渗流传热时,采热寿命延长2.71%;采热前9a,水流损失占主导作用,即流入上、下岩层水流损失对产热速率的影响高于热补偿效应,开采10a后,热补偿效应占主导作用;同时考虑水流损失和热补偿效应得到的产热速率变化规律与实际工程更为符合,建议选择低渗透能力的上、下岩层延长增强型地热系统(EGS)运行时间。