Monocyclic rod-type liquid crystals; 2,5-dialkanoyloxytropones and 5-alkanoyloxy-2-alkoxytropones

Two kinds of monocyclic troponoid mesogens, 2,5-dialkanoyloxytropones (4) and 5-alkanoyloxy2-alkoxytropones (5), were prepared. The former showed monotropic smectic A phases and the virtual isotropic liquid-smectic A transitions of the latter were determined by extrapolation of results in a binary phase diagram. Comparing the mesogenic properties between the tropones 4 and the 2-alkanoyloxy-5-alkoxytropones (1), the alkanoyloxy group at C-5 enhances both the melting points and the transition temperatures of the smectic A phases. From the comparison between 5 and 1, the alkanoyloxy group at C-2 lowers the melting points.     

Do some chemotaxis-growth models possess Lyapunov functionals?

In spirit of a result by W. Alt from 1980 we give some sufficient criteria that guarantee the existence of Lyapunov functionals for parabolic cross-diffusion models including chemotaxis-growth models with non-diffusive chemotactic signals (resp. with non-diffusive memory).     

Characterization of PI:PCBM organic nonvolatile resistive memory devices under thermal stress

In this study, we fabricated nonvolatile organic memory devices using a mixture of polyimide (PI) and 6-phenyl-C61 butyric acid methyl ester (PCBM) (denoted as PI:PCBM) as an active memory material with Al/PI:PCBM/Al structure. Upon increasing the temperature from room temperature to 470 K, we demonstrated the good nonvolatile memory properties of our devices in terms of the distribution of ON and OFF state currents, the threshold voltage from OFF state to ON state transition, the retention, and the endurance. Our organic memory devices exhibited an excellent ON/OFF ratio (I_ON/I_OFF > 10³) through more than 200 ON/OFF switching cycles and maintained ON/OFF states for longer than 10⁴ s without showing any serious degradation under measurement temperatures up to 470 K. We also confirmed the structural robustness under thermal stress through transmission electron microscopy cross-sectional images of the active layer after a retention test at 470 K for 10⁴ s. This study demonstrates that the operation of PI:PCBM organic memory devices could be controlled at high temperatures and that the structure of our memory devices was maintained during thermal stress. These results may enable the use of nonvolatile organic memory devices in high temperature environments.     

PUF‐based solutions for secure communications in Advanced Metering Infrastructure (AMI)

Advanced metering infrastructure (AMI) provides 2‐way communications between the utility and the smart meters. Developing authenticated key exchange (AKE) and broadcast authentication (BA) protocols is essential to provide secure communications in AMI. The security of all existing cryptographic protocols is based on the assumption that secret information is stored in the nonvolatile memories. In the AMI, the attackers can obtain some or all of the stored secret information from memories by a great variety of inexpensive and fast side‐channel attacks. Thus, all existing AKE and BA protocols are no longer secure. In this paper, we investigate how to develop secure AKE and BA protocols in the presence of memory attacks. As a solution, we propose to embed a physical unclonable function (PUF) in each party, which generates the secret values as required without the need to store them. By combining PUFs and 2 well‐known and secure protocols, we propose PUF‐based AKE and BA protocols. We show that our proposed protocols are memory leakage resilient. In addition, we prove their security in the standard model. Performance analysis of both protocols shows their efficiency for AMI applications. The proposed protocols can be easily implemented.     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600     

Polymer chain diffusion in polymer blends: A theoretical interpretation based on a memory function formalism

The diffusion of polymer chains in miscible polymer blends with large dynamic asymmetry—those where the two blend components display very different segmental mobility—is not well understood yet. In the extreme case of the blend system of poly(ethylene oxide) (PEO) and poly(methyl methacrylate)(PMMA), the diffusion coefficient of PEO chains in the blend can change by more than five orders of magnitude while the segmental time scale hardly changes with respect to that of pure PEO. This behavior is not observed in blend systems with small or moderate dynamic asymmetry as, for instance, polyisoprene/poly(vinyl ethylene) blends. These two very different behaviors can be understood and quantitatively explained in a unified way in the framework of a memory function formalism, which takes into account the effect of the collective dynamics on the chain dynamics of a tagged chain. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1239–1245     

Nonvolatile write‐once read‐many‐times memory behaviors of polyimides containing tetraphenyl fluorene core and the pendant triphenylamine or carbazole moieties

To better understand the structure–property relationships, two novel aromatic diamines containing tetraphenyl fluorene (TPF) moiety through triphenylamine (TPA) unit and carbazole (Cz) unit modification are designed and synthesized, respectively. Four thermally stable and excellent solubility polyimides are prepared and characterized. The excellent film‐formation ability and thin film stability are investigated by X‐ray diffraction (XRD) and atom force microscopy (AFM) measurements, respectively. The memory devices are fabricated, PIs films with low water uptakes sandwiched between indium‐tin oxide (ITO) ground electrode and Al top electrode, and exhibit nonvolatile write‐once read‐many‐times (WORM) memory behaviors with low threshold voltages, due to increasing the retention time through regulating the energy level. The current conduction mechanisms of all devices are linearly fitted by theoretical conduction model. Molecular simulations are used to demonstrate switching mechanism and the memory effects. The experimental results provide a sight for the design‐adjustable switching voltage of memory devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1630–1644     

Shape memory induced structural evolution of high performance copolyimides

In this work, two kinds of high temperature shape memory copolyimides were prepared and the shape memory cycles induced structural evolution of macromolecular chains was investigated in detail. The glass transition temperature (T_g) of poly(benzoxazole‐co‐imide) (PI1) and poly(benzimidazole‐co‐imide) (PI2) are 280 °C and 355 °C, respectively. The results show that PI1 could keep stable macromolecular chain structure under shape memory cycles and exhibit outstanding shape memory performance (R_f > 98%, R_r > 97%) under different stretch condition. Whereas, shape memory cycles induced orientation with more ordered macromolecular chains packing is formed for PI2 after several thermal mechanical cycles, which strongly affect physical crosslinking points, thermal mechanical properties as well as shape memory behaviors. The study on macroscopic property and microscopic structure evolution will promote a better understanding of the shape memory effect of polyimides and accelerate development of high performance polyimides for shape memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3858–3867     

Synthesis and design of polyurethane and its nanocomposites derived from canola-castor oil: Mechanical,thermal and shape memory properties

The recent global pandemic and its tremendous effect on the price fluctuations of crude oil illustrates the side effects of petroleum dependency more evident than ever. Over the past decades, both academic and industrial communities spared endless efforts in order to replace petroleum-based materials with bio-derived resources. In the current study, a series of shape memory polymer composites (SMPC's) was synthesized from epoxidized vegetable oils, namely canola oil and castor oil fatty acids (COFA's) as a 100% bio-based polyol and isophorone diisocyanate (IPDI) as an isocyanate using a solvent/catalyst-free method in order to eventuate polyurethanes (PU's). Thereafter, graphene oxide (GO) nanoplatelets were synthesized and embedded in the neat PU in order to overcome the thermomechanical drawbacks of the neat matrix. The chemical structure of the synthesized components, as well as the dispersion and distribution levels of the nanoparticles, was characterized. In the following, thermal and mechanical properties as well as shape memory behavior of the specimens were comprehensively investigated. Likewise, the thermal conductivity was determined. This study proves that synthesized PU's based on vegetable oil polyols, including graphene nanoparticles, exhibit proper thermal and mechanical properties, which make them stand as a potential candidate to compete with traditional petroleum-based SMPC's.     

Global existence and bounds for blow‐up time in a class of nonlinear pseudo‐parabolic equations with a memory term

In this article, we consider the initial boundary value problem for a class of nonlinear pseudo‐parabolic equations with a memory term: Under suitable assumptions, we obtain the local and global existence of the solution by Galerkin method. We prove finite‐time blow‐up of the solution for initial data at arbitrary energy level and obtain upper bounds for blow‐up time by using the concavity method. In addition, by means of differential inequality technique, we obtain a lower bound for blow‐up time of the solution if blow‐up occurs.