Defect identification in rods subject to forced vibrations using the spatial wavelet transform

Use of the wavelet transform (WT) to study the forced vibrations in a rod in order to detect the presence of a defect is proposed. The axial vibrations in an inhomogeneous rod, produced by the application of different forces, are simulated by the Network Simulation Method and the obtained response is analyzed with the WT. An analysis of the detection and location of defects for several applied forces and defects generated by locally changing density or stiffness of the rod is presented. A noise test was carried out to check the robustness of the technique in real situations.     

Estimation of directivity and sound power levels emitted by aircrafts during taxiing, for outdoor noise prediction purpose

Integrated noise model (INM) is the most internationally used software to calculate noise levels near airports. Take off, landing or pass by operations can be modeled by INM, but it does not consider aircrafts taxiing, which, in some cases, can be important to accurately evaluate and reduce airports’ noise assessment.Aircraft taxiing noise emission can be predicted using other prediction tools based on standards that describe sound attenuation during propagation outdoors. But these tools require data inputs that are not known: directivity and sound power levels emitted by aircraft during taxiing.This paper describes methods used to calculate directivity indexes and sound power levels, based on field measurements made in Madrid-Barajas Airport (Spain). Obtained results can be used as inputs for general purpose outdoor sound prediction software, which will be able to evaluate noise at airports vicinity as industrial noise.Directivity and sound power levels have been estimated in octave and third octave band terms, for several aircraft families.     

Measuring and predicting resolution in nanopositioning systems

The resolution is a critical performance metric of precision mechatronic systems such as nanopositioners and atomic force microscopes. However, there is not presently a strict definition for the measurement or reporting of this parameter. This article defines resolution as the smallest distance between two non-overlapping position commands. Methods are presented for simulating and predicting resolution in both the time and frequency domains. In order to simplify resolution measurement, a new technique is proposed which allows the resolution to be estimated from a measurement of the closed-loop actuator voltage. Simulation and experimental results demonstrate the proposed techniques. The paper concludes by comparing the resolution benefits of new control schemes over standard output feedback techniques.     

SELECTION OF PROPER EMBEDDING DIMENSION IN PHASE SPACE RECONSTRUCTION OF SPEECH SIGNALS

In phase space reconstruction of time series, the selection of embedding dimension is important. Based on the idea of checking the behavior of near neighbors in the reconstruction dimension, a new method to determine proper minimum embedding dimension is constructed. This method has a sound theoretical basis and can lead to good result. It can indicate the noise level in the data to be reconstructed, and estimate the reconstruction quality. It is applied to speech signal reconstruction and the generic embedding dimension of speech signals is deduced.     

Advantages of Odd Random Phase Multisine Electrochemical Impedance Measurements

Electrochemical impedance spectroscopy (EIS) is a powerful technique to study electrochemical processes and to perform screening tasks. Recently an integrated measuring and modeling methodology for EIS based on a multisine excitation signal was developed. A key issue in this methodology is the data analysis, allowing us to rapidly quantify the reliability of the measured data. In this paper, a comparison is made between classical single‐sine and the proposed multisine measurements on the same system. The fitting of the impedance data obtained by single‐or multisine excitation and using different weighting factors is also discussed. In addition to the advantages reported in earlier work, it is concluded that, of all investigated frequencies, the odd random phase multisine excitation yields the highest quality data in the shortest measurement time.     

非对称阻力元件抑制直流的实验研究

简要分析了双向进气型脉冲管制冷机中存在的直流现象及其抑制措施;使用所研制的两台非金属同轴脉冲管制冷机,通过测量其蓄冷器外壁温度分布的方法,实验验证了基于闭合回路的固有直流的方向;通过分析其降温曲线及对冷头最低无负荷温度的影响,验证了可以利用非对称阻力元件产生相反方向的附加直流以消除系统中的固有直流,从而取得较好的制冷效果。实验对其效果进行了量化分析。     

数字回音抵消器的选择方法

数字回音抵消器的选择与使用是提高长信网络及移动通信网络通话质量的关键.介绍了数字回音抵消器的最新选择方法与评判准则,为即将购买或更新回音抵消器的用户或网络运营商提供了有益的参考.     

Wind effects on noise propagation for complicated geographical and road configurations

Outdoor propagation from roads is influenced by wind, temperature and humidity. It is necessary to predict wind effects to simulate long-term environmental noise accurately. Noise levels have been measured in conjunction with wind speed and wind direction measurements. These noise levels showed noticeable daily changes. Excess attenuations of noise levels were found to depend on the vector wind (U_vec). By relating the vector wind and observed sound attenuations under all wind conditions, the influence of wind can be more accurately predicted for purposes of simulating noise propagation.     

Noise-induced dynamic bistability of front propagation

We study noise-induced front propagation in a bistable system of the activator–inhibitor type. By varying the intensity of the multiplicative noise, the velocity of the front exhibits a transition to a bistable regime, where the actual velocity and direction of front motion depends mainly on the (random) initial conditions.     

‘Best-case’ noise performance of feedback interferometers, potential for micromachine applications

We present a theoretical analysis of the noise performance of phase measuring feedback interferometers. We first analyse the operation of this kind of instrument and note that under certain circumstances bistability can occur. The bistable region should be avoided if possible when using feedback interferometry for high-accuracy measurement with low-input powers, as it can give rise to very high-noise levels. We then go on to investigate the effects of shot noise (on the interferometer output signal) and thermal noise (in the feedback loop), and relate these to the phase measurement accuracy of the interferometer. A ‘best-case’ calculation indicates that phase noise of about 0.005λ is possible at input powers in the nanowatt region. In practice, we expect that noise levels will be higher than predicted (particularly at high-input powers) due to the effects of vibration and air turbulence.