Time domain identification and ranking of noise sources in a pneumatic nail gun

This paper investigates the noise sources in a pneumatic nail gun. The study combines two complementary experimental approaches. The first uses simultaneous data observation, with sound, acceleration and air pressure signals simultaneously recorded in conjunction with a nail gun motion high speed video. This strategy allows the identification of the physical processes involved in the operation of the machine at different time instants, as well as the associated noise generation mechanisms. However, since multiple noise sources radiate at the same time, this observation technique is not sufficient for noise source identification and ranking. Thus, a second approach introduces a selective wrapping procedure, and the strategy assures a reliable classification of the noise sources. The investigation considers the following noise origins: the air exhaust, the machine body and the workpiece/worktable.     

Multi-scale noise estimation for image splicing forgery detection

Noise discrepancies in multiple scales are utilized as indicators for image splicing forgery detection in this paper. Specifically, the test image is initially segmented into superpixels of multiple scales. In each individual scale, noise level function, which reflects the relation between noise level and brightness of each segment, is computed. Those segments not constrained by the noise level function are regarded as suspicious regions. In the final step, pixels appears in suspicious regions of each scale, after necessary morphological processing, are marked as spliced region(s). The Optimal Parameter Combination Searching (OPCS) Algorithm is proposed to determine the optimal parameters during the process. Two datasets are created for training the optimal parameters and to evaluate the proposed scheme, respectively. The experimental results show that the proposed scheme is effective, especially for the multi-objects splicing. In addition, the proposed scheme is proven to be superior to the existing state-of-the-art method.     

Dependence of noise induced effects on state preparation in multiqubit systems

The perturbation of multiqubit systems by an external noise can induce various effects like decoherence, stochastic resonance and anti-resonance, and noise-shielding. We investigate how the appearance of these effects on disentanglement time depends on the initial preparation of the systems. We present results for 2-, 3- and 4-qubit chains in various arrangements and observe a clear dependence on the combination of initial geometry of the state space and the placement of noise. Finally, we see that temperature can play a constructive role for the control of these noise induced effects.     

Averaging of phase noise in PSK signals by an opto-electrical feed-forward circuit

This paper proposes an opto-electrical feed-forward circuit that reduces phase noise in binary PSK signals by averaging the noise. Random and independent phase noise is averaged over several bit slots by externally modulating a phase-fluctuating PSK signal with feed-forward signal obtained from signal processing of the outputs of delay interferometers. The simulation results demonstrate a reduction in the phase noise.     

SiP协调设计和PI解析(6)

概述了SiP(系统封装)协调设计和PI解析:(1)协调工程(下);(2)电源供给电路;(3)SSD噪声;(4)旁路电容。     

基于Zynq-7000的宽带自适应噪声抵消系统设计

由于干扰噪声常常是随机变化和非平稳的,传统的滤波方法很难消除.针对这一问题,选用自适应格型联合算法(GAL-NLMS).在Zynq-7000芯片PL部分实现了一个22阶的GAL-NLMS算法,在芯片的PS部分实现了驱动程序的设计和基于Qt的界面设计.处理速度达到175 Mbit/s,并在ZedBoard开发平台实现了宽带自适应噪声抵消系统.用被噪声干扰过的QPSK和16QAM调制信号对系统进行测试,结果表明系统有效.     

A UWB CMOS low-noise amplifier with noise reduction and linearity improvement techniques

In this paper, a highly linear CMOS low noise amplifier (LNA) for ultra-wideband applications is presented. The proposed LNA improves both input second- and third-order intercept points (IIP2 and IIP3) by canceling the common-mode part of all intermodulation components from the output current. The proposed LNA structure creates equal common-mode currents with the opposite sign by cascading two differential pairs with a cross-connected output. These currents eliminate each other at the output and improve the linearity. Also, the proposed LNA improves the noise performance by canceling the thermal noise of the input and auxiliary transistors at the output. Detailed analysis is provided to show the effectiveness of the proposed LNA structure. Post-layout circuit level simulation results using a 90 nm RF CMOS process with Spectre-RF reveal 9.5 dB power gain, -3 dB bandwidth (BW_−3dB) of 8 GHz from 2.4 GHz to 10.4 GHz, and mean IIP3 and IIP2 of +13.1 dBm and +42.8 dBm, respectively. The simulated S₁₁ is less than −11 dB in whole frequency range while the LNA consumes 14.8 mW from a single 1.2 V power supply.     

一种在色噪声环境下的信号检测方法

为了抑制蛟龙号载人潜水器水声通信受母船色噪声干扰的影响,本文提出了一种统计匹配滤波器在色噪声环境下使用的新方法,它通过将接收信号映射到一个生成子空间中进行信号检测,可提高输出水声通信信号的信噪比。受客观条件限制,向阳红09船——蛟龙号载人潜水器的试验母船噪声环境比较恶劣,对水声通信产生了较强的干扰。如何在向阳红09船的这种强、色噪声环境下,提升水声同步信号的检测能力,对提高水声通信的可靠性是非常有帮助的。实际采集试验数据分析结果验证了该检测算法比传统匹配滤波器有更强的信号检测能力。     

光静态散射测试系统的研究与实现

随着科学技术的发展,对粒子的大小、浓度及其他特性的探测已经发展成为一个专门的研究领域和现代测量学中的一个重要分支,而光散射法已经成为一种常用的粒子测量方法。为了满足应用需求,文中提出了一种基于C8051F500单片机的光静态散射测试系统方案,详细介绍了该测试系统的设计理论原理、硬件电路的设计依据、固件程序的设计思想和测试系统的具体实现。选取一定浓度的样品溶液,运用该系统进行光散射的角度依赖性测试,实际测量值与理论依据基本相符;在不同激光功率下,对同一角度的散射光强进行测试,将测量得到的数据分析,线性度良好,满足设计要求。     

红外成像系统NETD参数测试算法及应用研究

噪声等效温差(NETD)是表征红外成像系统灵敏度的关键参数,也是评估红外成像系统性能的重要参数之一,应用广泛。通过对红外成像系统3D噪声、信号传递函数(SiTF)、NETD等参数测试方法、算法和流程研究,给出一种基于视频文件的3D噪声离线对比测试方法和一种SiTF线性区自动判断计算斜率算法,在此基础上针对某型技术保障装备国产化光电检测平台开发了配套应用软件功能模块。实现了通过计算单位均方根噪声所对应的SiTF斜率值,分析得出系统NETD参数值的功能。以某型热像仪为被测对象,开展了测试结果重复性和一致性试验,并与美国Optikos公司I-SITE红外整机测试系统进行了对比测试。实验结果表明开发的NETD参数测试功能模块测试精度和重复性满足设计要求,具有较高实用价值,已进行了工程应用。