The Synthesis and Structure of Silica-Sodalite from Nonaqueous Systems

A silica polymorph, silica-sodalite was synthesized from a nonaqueous system NaOH-SiO2-C2H4(OH)2 and its chemical compositionwas determined to be Si12 O24,2C2H4(OH)2 by the X-fluorescence,thermogravimetric and organic elemental analyses. The single crystal X-ray diffraction structure determination of the silica-sodaliteshowed that the silica-sodalite is cubic, spacing group I23 and unitcell parameter a= 8.8354A. The IF and solid state high resolution Siand 13 C NMR spectra of the silica-sodalite were measured and discussed .     

阿维菌素催化选择加氢合成伊维菌素研究

用RhCl3·3H2O和TPPDS间-(二磺化三苯基膦二钠盐),在水-有机两相催化体系中对阿维菌素选择加氢制备伊维菌素的研究,考察了反应温度(60～90℃)、氢气压力(1.0～4.0MPa)、配体浓度(2.2×10-3～5.2×10-3mol/L)、三乙胺浓度(0～8.4×10-4mol/L)、不同阳离子表面活性剂(TBAC:十四烷基二甲基苄基氯化铵;CPB:溴代十六烷基吡啶;CTAB:十六烷基三甲基溴化铵;TBAI:四丁基碘化铵)及反应时间对加氢反应活性和选择性的影响,其结果表明,在该两相体系中阿维菌素进行选择加氢是可行的,阳离子表面活性剂加入加快了反应速度,提高了反应的转化率和选择性.     

主成份分析-偏最小二乘法分光光度法同时测定钴、镍、铜、锌四组份体系

用 PCA 及 PLS 分步处理分光光度数据,有效降低了计算的维数。以该法对不同酸度体系的5-Br-PADAP-钴、镍、铜、锌分光光度数据进行了处理,定量分析结果良好。     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.     

Liquid-liquid Extraction System Based on Non-ionic Surfactant-salt-H_2O and Mechanism of Drug Extraction

The utilization of solid-liquid extraction system based on polymer-(NH4)2SO4 -H2O on separation of metal ions and bio-active substances has been summarized1. Cloud point extraction (CPE) benefits the environment and has been used in separation of metal chelates, biomacromolecules and in pretreatment of environmental samples2-4. In a 10 mL color comparison tube 20% PEG-1000 and 2.5 g (NH4)2SO4 were chosen as phase separation condition at pH 5.5. The average extraction efficiencies we…     

Network theory of the nonlinear behaviour of polymer melts. Simple shear flow

Summary The network model developed in a previous paper is applied to the simple shear flow of polymer melts. The constitutive equation obtained consists of two terms. One of them describes the stress due to the network strands which exist at the onset of the deformation, dissociate during the deformation and result in a single integral constitutive equation with a strain dependent damping function. The formulation of the damping function in invariant form seems to be almost impossible.The second normal stress differenceN ₂ of the model is not zero,but has negative values. According to our model this is a consequence of the deformation dependence of the disentanglement process. The theory is compared with experimental data for a LDPE melt. It is found that the model explains the main features of the shear flow behaviour of the LDPE melt investigated preciously.

---

Zusammenfassung Das Netzwerk-Modell, das in einer vorangegangenen Arbeit entwickelt wurde, wird für die einfache Scherströmung von Polymerschelzen angewendet. Die abgeleitete rheologische Zustandsgleichung besteht aus zwei Gliedern. Das erste beschreibt die Spannung-Dehnung-Beziehung der Kettensegmente, die zu Beginn der Deformation existieren und während der Deformation aufgelöst werden. Es hat die Form der einfachen Integralbeziehung mit einer Gedächtnisfunktion. Es ist kaum möglich, die dabei erhaltene Gedächtnisfunktion als Funktion der Invarianten der der Tensoren darzustellen. Die zweite Normal-SpannungsdifferenzN ₂ des Modells ist nicht Null und hat einen negativen Wert. Dies ist nach unserem Modell eine Folge der Deformationsabhängigkeit des Entschlaufungsprozesses. Die Theorie wird mit dem experimentellen Daten für eine LDPE-Schmelze verglichen, wobei sich zeigt, daß das Modell die wesentlichen Merkmale des Scherverhaltens der LDPE-Schmelze gut erklärt.

     

LiCl—HOAc和LiCl—HOAc—H2O体系（25℃）相图

测定了LiCl-HOAc和LiCl-HOAc-H_2O体系25℃时的溶度,绘制了溶度图.在LiCl-HOAc体系的相图中有LiCl及LiCl·1/2HOAc2种固相,后者是固液异成分化合物,体系中未发现LiCl·5HOAc或LiCL·HOAc的生成.LiCl-HOAc-H_2O体系25℃时的相图中有3种固相,即LiCl·H_2O、LiCl和LiCl·(1/2)HOAc.相变LiCl·H_2O→LiCl→LiCl·(1/2)HOAc表明HOAc在该三元体系中具有盐溶、脱水和溶剂合3种作用.此结果提供了一种制备无水LiCl的新方法.     

Room Temperature Solid State Reaction Involving Structural Transformation of Covalent Oxide Network

An interesting structural transformation from a two dimensional (2d) covalent oxide network with a layered structure to a three-dimensional (3d) network with a tunnel structure was found at room temperature in the mixture of hydrated alkali-metal molybdenum bronze and amorphous alkali-metal molybdate. From various experimental results it was concluded that the transformation was due to a room temperature solid state reaction.     

Volumetric properties of the boldine + alcohol mixtures at atmospheric pressure from 283.15 to 333.15 K: A new method for the determination of the density of pure boldine

Densities of boldine + alcohol binary mixtures were measured over the whole accessible range of boldine compositions at temperatures from 283.15 to 333.15 K using an Anton-Paar digital vibrating glass tube densimeter. The binary systems studied include, as a solvent, seven normal alcohols from n-C₁ to n-C₆, n-C₈, and isopropanol. The density of these systems has been found an increasing function of the boldine composition. A new methodology based on density data of solutions of solid solutes with normal alcohols is described in order to determine solid molar volume of pure solutes. This methodology was validated with pure solid naphthalene molar volumes data at 298.15 K, with an average uncertainty of 6%.     

Synthesis，X－ray Structure and Spectral Propertiesofa Tetra－component Heteropoly Compound

Ｓｙｎｔｈｅｓｉｓ，Ｘ－ｒａｙＳｔｒｕｃｔｕｒｅａｎｄＳｐｅｃｔｒａｌＰｒｏｐｅｒｔｉｅｓｏｆａＴｅｔｒａ－ｃｏｍｐｏｎｅｎｔＨｅｔｅｒｏｐｏｌｙＣｏｍｐｏｕｎｄＺＨＡＮＧＨｅｎｇ－ｂｉｎ，ＹＡＮＧＧｕａｎｇ－ｄｉ，ＱＩＸｉｎｇ－ｙｉａｎｄＬＩＳｈｕ...