场发射阵列阴极(FEA)在微波器件中的应用

分析了场发射阵列阴极的跨导、电容以及阵列阴极的发射电流密度、电子束直径、电流稳定性对微波器件性能的影响,并提出了相应的改善措施,有效地提高了微波器件的性能.最后,概述了金刚石薄膜及碳纳米管阵列阴极在微波器件中的应用情况,目前虽然还不成熟,却显得有极大的潜力.     

彩色表面等离子体共振成像初探

自主设计并建立了彩色表面等离子共振成像(Color SPRI, CSPRI)实验系统, 并结合利用自己编制的软件开展了相关研究, 成功地观测到溶液和蛋白点阵的彩色图像. 这些结果显示, CSPRI有可能成为生物分子微点阵(或生物芯片)的一种新型的彩色显示手段.     

自控液晶光阀组式光刻快门研究

通过理论推导,构建了抗蚀剂的感光特性、光源的光效与曝光量之间的数学模型,为液晶光阀代替穿孔带提供了理论依据.结合液晶光阀的工作原理和光刻快门的控制原理,对液晶光阀组的控制进行了研究并给出了其控制电路图.通过实际光刻试验,自控液晶光阀组光刻快门机构可以完成编码图案的控制,通光控制达到了预计要求,刻出的图案清晰,线条陡直.证明液晶光阀组替代穿孔带用作光刻快门是完全可行的.     

考虑红外焦平面器件非线性响应的一种非均匀性校正方法

针对红外焦平面阵列的非线性响应特性,提出了一种考虑非线性响应的“曲线—直线”校正方法,并给出了校正的计算公式.仿真实验结果说明此方法具有精度高,计算量小的优点,需要存储的参数少,易于硬件实现.     

多孔氧化铝模板催化制备定向碳纳米管阵列

Well-aligned open-ended multi-walled carbon nanotube (MWCNT) arrays were prepared via chemical vapor deposition (CVD) method in porous anodic aluminum oxide (AAO) templates without depositing any transition metals as catalyst. Effects of the CVD temperature and heat treatment were studied in detail.Well-aligned open-ended MWCNT arrays were obtained at the CVD temperature above 600 ℃; when CVD temperature is reduced to around 550 ℃, CNTs, CNFs and other structures existed at the same time; no CNTs or carbon nanofibres (CNFs) could be found as the CVD temperature is below 500 ℃, and only amorphous carbon in the porous AAO template was found. Experimental results showed that the AAO template is catalytic during the CVD process, and it has the following two effects: to catalyze thermal decomposition of acetylene and to catalyze conversion of carbon decomposed from acetylene into CNTs or CNFs. Heat treatment could improve the graphitization degree, but it might also introduce new defects.     

纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

Ti基ZnO纳米棒阵列的制备及其光催化性能研究

采用两电极体系中恒电流电沉积在Ti基底上制得较均一的ZnO纳米棒阵列,利用SEM和XRD观察表征样品,研究Zn(NO₃)₂浓度及电流密度对ZnO纳米棒阵列微观形貌的影响. 以甲基橙为目标降解物,考察该电极光催化性能. 结果表明,Zn(NO₃)₂浓度和电流密度对纳米棒阵列的形貌有显著影响;与ITO玻璃等其他基底相比,在Ti基底上也可沉积较好均一取向的ZnO纳米棒阵列;紫外灯照射下,ZnO/Ti电极对甲基橙（10 mg·L^-1）模拟印染废水降解2.5 h,降解率达到83.3%,光催化活性较佳;无光照时ZnO纳米棒的降解率仅7%.     

Functionalized polypyrrole nanotube arrays as electrochemical biosensor for the determination of copper ions

A novel electrochemical biosensor based on functionalized polypyrrole (PPy) nanotube arrays modified with a tripeptide (Gly-Gly-His) proved to be highly effective for electrochemical analysis of copper ions (Cu²⁺). The vertically oriented PPy nanotube arrays were electropolymerized by using modified zinc oxide (ZnO) nanowire arrays as templates which were electrodeposited on indium–tin oxide (ITO) coated glass substrates. The electrodes were functionalized by appending pyrrole-α-carboxylic acid onto the surface of polypyrrole nanotube arrays by electrochemical polymerization. The carboxylic groups of the polymer were covalently coupled with the amine groups of the tripeptide, and its structural features were confirmed by attenuated total reflection infrared (ATR-IR) spectroscopy. The tripeptide modified PPy nanotube arrays electrode was used for the electrochemical analysis of various trace copper ions by square wave voltammetry. The electrode was found to be highly sensitive and selective to Cu²⁺ in the range of 0.1–30 μM. Furthermore, the developed biosensor exhibited a high stability and reproducibility, despite the repeated use of the biosensor electrode.     

阳极氧化法制备TiO2多孔薄膜

本文综述了制备TiO₂薄膜的各种方法,详细介绍了阳极氧化法制备TiO₂多孔膜的进展,在非含氟电解液体系中,对纯钛进行阳极氧化处理可制得表面呈无规则生长的多孔膜结构;在含氟电解液体系中,则可自组织形成高度有序的TiO₂纳米管阵列,并指出阳极氧化法是可在常温低压下进行、操作工艺简单、薄膜性能稳定、再现性好的一种最具工业化应用潜力的制备方法。     

基于生物素-亲和素相互作用的胶体晶体阵列的构筑与特性

将胶体晶体阵列(crystalline colloidal arrays,CCA)的Bragg衍射特性与水凝胶的刺激响应性功能结合起来,可制成一种有效的对特定分子具有识别和响应能力的传感材料.采用无皂乳液聚合制备的单分散聚(苯乙烯-4-苯乙烯磺酸钠)纳米颗粒,通过表面电荷的静电斥力可自组装形成CCA,经光聚合固定在水凝胶网络内形成聚合胶体晶阵(polymerized CCA).在水凝胶网络中用共价结合引入生物素分子,通过强的亲和相互作用可与蛋白质亲和素生成生物素-亲和素复合物,在水凝胶网络中形成交联点,引起水凝胶体积相变,进而导致CCA晶面间距发生改变,从而引发Bragg衍射波长发生相应的移动.