Frequency down-conversion using cascading arrays of coupled nonlinear oscillators

A novel coupling scheme using M≥2 arrays of coupled nonlinear elements arranged in a specific configuration can produce multifrequency patterns or a frequency down-converting effect on an external (input) signal. In such a configuration, each array contains N≥3 nonlinear elements with similar dynamics and each element is coupled unidirectionally within the array. The subsequent arrays in the cascade are coupled in a similar fashion except that the coupling direction is arranged in the opposite direction with respect to that of the preceding array. Previous theoretical work and numerical results have already been reported in [P. Longhini, A. Palacios, V. In, J. Neff, A. Kho, A. Bulsara, Exploiting dynamical symmetry in coupled nonlinear elements for efficient frequency down-conversion, Phys. Rev. E 76 (2007) 026201]. This paper is focused on results of experiments implemented on two distinct systems: the first system is fabricated using discrete component circuits to approximate an overdamped bistable Duffing oscillator described by a quartic potential system, and the second system is built in a microcircuit, where the nonlinearity is described by a hyperbolic tangent function, with the option of applying an external signal to investigate resonant effects. In particular, the circuit implementations for each case use M=2 arrays, but their voltage oscillations already demonstrate that the frequency relations between each of the successive arrays decrease by a rational factor, conforming to earlier theoretical and numerical results for the general case containing M arrays. This behavior is important for efficient frequency down-converting applications which are essential in many communication systems where heterodyning is typically used and it involves multi-step processes with complicated circuitry.     

Transparent titania nanotubes of micrometer length prepared by anodization of titanium thin film deposited on ITO

Transparent TiO₂ nanotube arrays of micrometer lengths were prepared by anodization of titanium thin film RF sputtered on indium tin oxide (ITO) which was coated on glass substrate. The sputtering process took place at elevated temperature of 500 °C. The structures of the films were studied using scanning electron microscopy (SEM) and X-ray diffraction (XRD) while the optical properties of the films were investigated using UV-visible spectroscopy. Two types of electrolytes were used in this work: an aqueous mixture of acetic acid and HF solution and a mixture of NH₄F and water dissolved in ethylene glycol. The concentration of NH₄F, voltage and the thickness of the sputtered titanium film were varied to study their effect on the formation of TiO₂ nanotube arrays. It is demonstrated in this work that the nanoporous layer is formed on top of the ordered array of TiO₂ nanotubes. Furthermore, the optical transmittance of TiO₂ nanotubes annealed at 450 °C is much lower than the non annealed TiO₂ nanotubes in the visible wavelength region.     

Ni-doped TiO2 nanotube arrays on shape memory alloy

Self-organized Ni-Ti-O nanotube arrays were fabricated through a direct anodization of NiTi shape memory alloy in glycerol-based electrolyte. The growth of Ni-doped TiO₂ nanotube arrays was mainly affected by anodization voltage and temperature. Higher anodization voltage facilitated the growth of uniform nanotube arrays. Large-area open-ended Ni-Ti-O nanotube arrays could form on the surface of the shape memory alloy under a higher anodization temperature. The oxide nanotubes had a gradually changed composition along the growth direction of the nanotube and presented a thermal stability up to 400 °C. The nanotubular oxide demonstrated a much better hydrophilic behavior than that of the traditional oxide layer grown on NiTi substrate through air oxidization. The successful fabrication of Ni-doped TiO₂ nanotube arrays here makes it feasible to further explore excellent physical and chemical as well as biomedical properties of the nanotube-modified surfaces of the NiTi shape memory alloy.     

Evidence for shape coexistence at medium spin in Rb

Four previously known rotational bands in ⁷⁶Rb have been extended to moderate spins using the Gammasphere and Microball γ ray and charged particle detector arrays and the ⁴⁰Ca(⁴⁰Ca, 3pn) reaction at a beam energy of 165 MeV. The properties of two of the negative-parity bands can only readily be interpreted in terms of the highly successful Cranked Nilsson-Strutinsky model calculations if they have the same configuration in terms of the number of g9/2 particles, but they result from different nuclear shapes (one near-oblate and the other near-prolate). These data appear to constitute a unique example of shape coexisting structures at medium spins.     

A greedy algorithm for the two-level nested logit model

We consider the assortment optimization problem under the classical two-level nested logit model. We establish a necessary and sufficient condition for the optimal assortment and develop a simple and fast greedy algorithm that iteratively removes at most one product from each nest to compute an optimal solution.     

Distributed uplink scheduling and rate control in cdma2000 using adaptive antenna arrays

Distributed uplink scheduling and rate control in CDMA networks are considered in the case of adaptive antenna arrays present at the base station. The system model with omnidirectional antennas is generalized to the case where adaptive antenna arrays are deployed. Rate control in a probabilistic manner is investigated. Long-term control by the base station through token bucket constraints is incorporated in the system. Monte Carlo simulation results show considerable improvement when adaptive antenna arrays are used. Optimization of the rate transition probabilities is treated in the special case of on–off scheduling.     

Comparison of three methods for fractionation and enrichment of low molecular weight proteins for SELDI-TOF-MS differential analysis

In most diseases, the clinical need for serum/plasma markers has never been so crucial, not only for diagnosis, but also for the selection of the most efficient therapies, as well as exclusion of ineffective or toxic treatment. Due to the high sample complexity, prefractionation is essential for exploring the deep proteome and finding specific markers.In this study, three different sample preparation methods (i.e., highly abundant protein precipitation, restricted access materials (RAM) combined with IMAC chromatography and peptide ligand affinity beads) were investigated in order to select the best fractionation step for further differential proteomic experiments focusing on the LMW proteome (MW inferior to 40,000 Da). Indeed, the aim was not to cover the entire plasma/serum proteome, but to enrich potentially interesting tissue leakage proteins. These three methods were evaluated on their reproducibility, on the SELDI-TOF-MS peptide/protein peaks generated after fractionation and on the information supplied.The studied methods appeared to give complementary information and presented good reproducibility (below 20%). Peptide ligand affinity beads were found to provide efficient depletion of HMW proteins and peak enrichment in protein/peptide profiles.     

Electrical properties of Pt interconnects for passive crossbar memory arrays

We report on the fabrication and the electrical characterization of platinum interconnects for novel non-volatile memory technologies. These nanowires present an important and essential contribution to the deep nanometer scaling of alternative architectures beyond CMOS, e.g. nanocrossbar arrays with resistance switching junctions. The nanowires, which have a thickness of 25 nm and a width ranging from 200 nm down to 40 nm, were patterned using electron beam direct writing. They were deposited by UHV electron beam evaporation in combination with a lift-off process.The electrical characteristic is increasingly affected by the contribution of surface effects like scattering at grain boundaries and scattering at the surfaces as the wire dimensions become smaller. With decreasing width of the platinum wire an increasing resistivity was observed, which is consistent with the theories of Fuchs-Sondheimer and Mayadas-Shatzkes. Our studies have shown that the investigated structures possess a high stability concerning the operational current densities up to 4 × 10⁷ A/cm², and an additional annealing step results in an improvement of the electrical wire properties, which is explained by a higher quality of the grain boundaries and side walls.     

Monolithic two-dimensional GaAs/AIGaAs laser arrays fabricated by chlorine lon-beam-assisted micromachining

Chlorine ion-beam-assisted etching (IBAE) has been used to micromachine laser facets and deflecting mirrors for monolithic two-dimensional GaAs/AIGaAs laser arrays. Three laser cavity/deflector designs have been successfully implemented. The first utilizes a parabolic deflecting mirror to directly focus the laser radiation; the second consists of a folded cavity with a vertical facet, a top surface facet, and an internal 45° reflector; and the third has a folded cavity with an internal Al_0.2Ga_0.8As/Al_0.8Ga_0.2As dielectric mirror stack and a top surface facet formed in a single etch step with two internal 45° reflectors. The parabolic deflecting mirrors are currently modeled forf- 0.8 collection efficiency, making the first design attractive in incoherent arrays for high-power applications such as pumping Nd:YAG lasers. The other two structures are of interest for incoherent or coherent arrays used in high- and medium-power applications, since the top surface facets can easily be antireflection coated. The design with a dielectric mirror stack is particularly simple to fabricate.     

Design and development of multicolor MWIR/LWIR and LWIR/VLWIR detector arrays

Multicolor infrared (IR) focal planes are required for high-performance sensor applications. These sensors will require multicolor focal plane arrays (FPAs) that will cover various wavelengths of interest in mid wavelength infrared/long wavelength infrared (MWIR/LWIR) and long wavelength infrared/very long wavelength infrared (LWIR/VLWIR) bands. There has been significant progress in HgCdTe detector technology for multicolor MWIR/LWIR and LWIR/VLWIR FPAs.^1–3 Two-color IR FPAs eliminate the complexity of multiple single-color IR FPAs and provide a significant reduction of weight and power in simpler, reliable, and affordable systems. The complexity of a multicolor IR detector MWIR/LWIR makes the device optimization by trial and error not only impractical but also merely impossible. Too many different geometrical and physical variables need to be considered at the same time. Additionally, material characteristics are only relatively controllable and depend on the process repeatability. In this context, the ability of performing “simulation experiments” where only one or a few parameters are carefully controlled is paramount for a quantum improvement of a new generation of multicolor detectors for various applications.