Oxidation at a sol-gel composite electrode doped with a dirhodium-substituted polyoxometalate for amperometric detection of peptides separated by HPLC

Oxidation of a variety of compounds, including methionine (Met), using a complex formed between dirhodium(II) acetate and the lacunary form of phosphotungstic acid as the catalyst is effective over a wide range of conditions, including pH 2–10. Thus, amperometric detection at a composite in which this complex is immobilized in a sol–gel material does not place restrictions on selection of conditions for separations by reverse-phase HPLC. A demonstration of this point is shown by a study of Met, Met–Phe, Phe–Met, Met–Met, and Gly–Met–Gly (Phe, phenylalanine; Gly, glycine). Using a 0.05 M phosphate buffer at pH 6.7, a C18 column, and a flow rate of 1 ml min⁻¹, capacity factors for Met, Gly–Met–Gly, Met–Met, and Phe–Met were 1.4, 2.1, 5.6, and 34, respectively. Phe–Met and Met–Phe co-eluted.     

Microporous SiO2 and SiO2/MOx (M=Ti,Zr, Al) for ceramic membrane applications: A microstructural study of the sol-stage and the consolidated state

Microporous SiO₂ and SiO₂/MO₂ (M=Ti, Zr, Al; 10 mol% MO_x) materials for gas separation membrane applications have been prepared from polymeric sols. Characterization of these sols with SAXS showed that the mean fractal dimension of the SiO₂ sols is 1.3–1.4 with a radius of gyration of approximately 2.5 nm. The dried and calcined films are microporous and the pore size distribution was bimodal with maxima at diameters of 0.5 nm and 0.75 nm. For the SiO₂/TiO₂, SiO₂/ZrO₂ and SiO₂/Al₂O₃ systems, much milder reaction conditions proved to be necessary to obtain sols with comparable fractal dimensions due to the high reactivity of the Ti/Zr/Al-alkoxides. Microporous supported membranes with molecular sieve-like gas transport properties can be prepared from a relatively wide range of sol structures: from polymers too small to characterize with SAXS to structures with fractal dimensions: 1<d _f<2.04.     

Sol-Gel Preparation of Ceramic Coatings for Electrical, Laser, Space Engineering and Power

The brief review, based on long-term experience of authors on preparation of temperature-resistant electric insulating and optical light-reflecting ceramic coatings on metal surface is offered. The main components of TEOS-, H₃PO₄- and alkali silicates-derived sols and suspensions for deposition of ceramic coatings are listed. Some features of preparation of the coatings from the sols containing fillers are analysed. Two approaches to improve bending and electrical strength of flexible insulation are developed. The techniques of synthesis of modified fillers for preparing gas-proof and anticorrosive coatings are offered. The wide functional possibility and extensive list of application areas of the coatings and some materials prepared from sols with fillers, including on far prospect are given.     

Sol-Gel Synthesis of Humidity-Sensitive P2O5-SiO2 Amorphous Films

The sol-gel synthesis of silicophosphate gels using phosphoryl chloride and tetraethoxysilane as molecular precursors is reported and discussed. Gel-derived glasses and films having the molar compositions 10P₂O₅ · 90SiO₂ and 30P₂O₅ · 70SiO₂ have been obtained. The structure of the dried gels as well as the structural modifications that occurs during the transformations in gel-derived glasses are analyzed by Fourier transform infrared spectroscopy (FTIR). It has been found that the evidence of the P—O—Si linkages begins to appear only on the FTIR spectra of the bulk gels heat treated up to 400°C while they are well resolved on the FTIR spectra of the bulk gel samples heated up to 1000°C indicating that at this temperature the transformation in the corresponding gel-derived glasses occurs. The humidity sensitive properties of the gel-films have been evaluated by electrochemical impedance spectroscopy (EIS). The phosphorous content as well as the temperature of the heat treatments strongly affect the sensitivity to RH of the gel-derived films.     

Synthesis and Spectroscopic Studies of Chosen Heteropolytungstates and Their Ln(III) Complexes

The heteropolytungstates [(Na)P₅W₃₀O₁₁₀]^4– (I), [(Na)Sb₉W₂₁O₈₆]^18– (II) and [(Na)As₄W₄₀O₁₄₀]^27– (III) and the monovacant Keggin structure of the general formula [XW_11–xMo_xO₃₉]^n– (X-Si, P; n = 7 for P and 8 for Si) (IV) as well as their europium(III) complexes were studied. The structures of I–IV as well as the europium(III) encrypted [(Eu)P₅W₃₀O₁₁₀]^12– (VI), [(Eu)Sb₉W₂₁O₈₆]^16– (VII), [(Eu)As₄W₄₀O₁₄₀]^25– (VIII) and sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– (n =11 for P and n = 13 for Si) (V) complexes were synthesized and spectroscopically characterized. The complexes were studied using UV-Vis absorption and luminescence, as well as the laser-induced europium ion luminescence spectroscopy. Absorption spectra of Nd(III) were used to characterize the complexes formed. Excitation and emission spectra of Eu(III) were obtained for solid complexes and their solutions. The relative luminescence intensities of the Eu(III) ion, expressed as the ratio of the two strongest lines at 594 nm and 615 nm, = I₆₁₅/I₅₉₄, which is sensitive to the environment of the primary coordination sphere about the Eu(III) ion, was calculated. In the case of the sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– complexes a linear dependence of the luminescence quantum yield of Eu(III) ion, , (calculated using [Ru(bpy)₃]Cl₂ as a standard) on the content of Mo (number of atoms, x) in the [Eu(XW_11–xMo_xO₃₉)₂]^n– structure was observed.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

层叠Blumlein线多开关导通时间分散性

高介电常数陶瓷储能脉冲形成线需要用到多开关触发的层叠Blumlein线结构。从形成线波过程理论出发，分析了多开关导通时间分散性对层叠Blumlein线及其输出波形的影响。主要包括两方面影响:其一是造成输出方波脉冲的前沿和后沿均出现阶梯形畸变；其二是使得各延迟导通的平行平板Blumlein线承受过电压，容易引起陶瓷储能介质的电击穿。在不单独考虑开关电感的理想情况下，利用PSpice电路程序模拟了开关导通时间分散性对四级层叠Blumlein线的影响，模拟结果与波过程理论分析一致。为减弱这些影响，提出了可行的解决方案。     

Computer simulation of single-crystal and polycrystal sputtering I

Sputtering of Cu single-crystal and polycrystal targets by 27 keV Ar ions has been simulated using the new binary collision cascade computer program OKSANA. The sputtering yield, the sputtering and reflection efficiencies, and the absolute and relative contributions to sputtering from various components have been calculated in a broad range of incidence angles. The obtained angular dependences of the sputtering yield have proved to agree with experimental data. Some features of sputtering due to semichannel focusing of incident particles have been found. The contributions to sputtering from several types of linear collision chains and from the primary knock-on atoms are considered in most detail. It has been shown, in particular, that the pure focused, pure defocused, and mixed focused-defocused collision chains contribute noticeably to sputtering. The contribution from the primary knock-on atoms is angle-dependent and reaches its maximum in the range of glancing angles for both single-crystal and polycrystal targets.     

Low temperature molten salt synthesis of YAG: Ce spherical powder and its thermally stable luminescent properties after post-annealing treatment

Spherical YAG: Ce particles were successfully synthesized at 350 °C by the molten-salt method. The effect of temperature and amount of salt on the crystallization and particle size of YAG: Ce were investigated thoroughly. The results demonstrated that the powders prepared at 350 °C in salt to reactant ratio 2:1 were pure YAG: Ce phase with 200–300 nm in particle size. The as-synthesized phosphors were later post annealed at 1200 °C in O₂, air and N₂, respectively. The results showed that the emission intensity of YAG: Ce sensitively depended on the post-treated atmosphere and the phosphor annealed in N₂ showed the highest emission intensities and a good thermal stability.     

The Intrusion of the Meissen Pluton (Elbe Valley-Zone): Evidence from Geochemical and Isotopic Data

Abstract

Geochemical and mineralogical investigations of plutonic rocks from the Meiβen massif indicate different magmatic evolution trends of the Freital sequence as well as for the central part of the complex Constant ε-Nd_T-345 values of ?1.5 of the Freital sequence and major/trace element data point to a fractional crystallization process. Based on ε-Nd values, ¹⁴⁷Sm/¹⁴⁴Nd ratios as well as on geochemical data affinities to alkali basalts cannot be excluded.

Analogous conclusions have been drawn regarding mineral chemical data [10] and cathodoluminescence spectra of apatite [13]. Assimilation of old continental crust, reflected by relics of apatite and zircon, may be the reason that the ε-Nd values plot at the lower end of the “mantle array”. The pyroxene-monzodiorite from Gröba belongs to the same source environment as the Freital sequence (Nd-characteristics).

The geological evolution of the central part of the studied plutonic complex is completely different to the Freital sequence: most of the intrusions show signatures of open system fractionation processes. The ε-Nd_T-345 value of ?1.46 of the Leuben monzonite indicates a narrow relation to the Freital sequence, whereas the ε-Nd_T-345 value of +2.27 of the Spitzgrund monzonite either reflects the derivation of another basic material then the Freital-type or the participation of other mixing component(s) from geologically young crust.

Fabric and mineral chemical investigations of the porphyry-like granite GII point to a mixing process of basic xenocrysts, resembling the corresponding minerals of the Freital sequence, and granite melts [10]. Large amounts of old zircon cores [11] indicate the inheritance of continental crust components by the Hauptgranit. Isotopic investigations on various granitic samples (GII, Hauptgranit and Riesensteingranit) reflect an increasing trend towards the crustal source(s) of their parental melts. The ε-Nd_T-345 values are ?3.75, ?4.16 and ?6.13, respectively.

Chemical parameters and the ε-Nd_T value of the Riesensteingranit agree with data of granites from the Saxonian Granulite Massif (see e.g. Wand et al. [8]; von Quadt, 1992). Thus, it may be possible that both granite types derived from similar sources.