A highly sensitive method for quantification of myosin light chain phosphorylation by capillary isoelectric focusing with laser-induced fluorescence detection

Activation of myosin II by phosphorylation of the 20 kDa regulatory light chains (LC20) has been implicated in numerous contractile and motile events, e.g., smooth muscle contraction, cytokinesis, and cell migration. The ability to analyze LC20 phosphorylation in minute samples is critical to determine the importance of LC20 phosphorylation in diverse physiological processes. We have developed a method for the separation and quantification of unphosphorylated, monophosphorylated, and diphosphorylated LC20 with a detection limit of 1 pg (50 amol). LC20 is initially isolated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and transblotted to a polyvinlyidene difluoride (PVDF) membrane. The region of the membrane containing the LC20 band (identified by electrophoresis of purified LC20 in a neighboring lane) is cut out and fluorescently labeled with Alexa Fluor 488 C5 maleimide. The labeled LC20 is eluted from the membrane with detergent and subjected to capillary isoelectric focusing (CIEF) to separate unphosphorylated, mono-, and diphosphorylated LC20, which are detected and quantified by laser-induced fluorescence (LIF). A linear relationship between log(peak area) and log(LC20 amount) is observed over the range of 50 amol-150 fmol. Quantification of LC20 phosphorylation by CIEF with LIF detection was compared with three commonly used methods with much lower levels of sensitivity: urea/glycerol-PAGE with Western blotting, phosphorylation by [gamma-32P]ATP with Cerenkov counting, and phosphorylation by [gamma-32P]ATP followed by SDS-PAGE, autoradiography, and scanning densitometry. All four methods gave very similar quantitative results, the major difference being that the new method exhibits 3000-fold enhanced sensitivity. This method is therefore applicable to quantitative analysis of phosphorylation of minute quantities of LC20.     

Zhang–Zhang Polynomials of Multiple Zigzag Chains Revisited: A Connection with the John–Sachs Theorem

Multiple zigzag chains Zm,n of length n and width m constitute an important class of regular graphene flakes of rectangular shape. The physical and chemical properties of these basic pericondensed benzenoids can be related to their various topological invariants, conveniently encoded as the coefficients of a combinatorial polynomial, usually referred to as the ZZ polynomial of multiple zigzag chains Zm,n. The current study reports a novel method for determination of these ZZ polynomials based on a hypothesized extension to John–Sachs theorem, used previously to enumerate Kekulé structures of various benzenoid hydrocarbons. We show that the ZZ polynomial of the Zm,n multiple zigzag chain can be conveniently expressed as a determinant of a Toeplitz (or almost Toeplitz) matrix of size m2×m2 consisting of simple hypergeometric polynomials. The presented analysis can be extended to generalized multiple zigzag chains Zkm,n, i.e., derivatives of Zm,n with a single attached polyacene chain of length k. All presented formulas are accompanied by formal proofs. The developed theoretical machinery is applied for predicting aromaticity distribution patterns in large and infinite multiple zigzag chains Zm,n and for computing the distribution of spin densities in biradical states of finite multiple zigzag chains Zm,n.     

二水草酸锌脱水的热分解动力学研究

提出一种多升温速率-等温法确定机理函数g(α)的新方法;并用迭代的等转化率法求出较为可靠的活化能Ea;在Ea和g(α)的基础上计算出指前因子A.用该法对二水草酸锌（ZnC2O4•2H2O）脱水反应的热分解动力学三因子进行了求算,得出Ea为87.22 kJ•mol－1, A为4.2120×108～7.2328×108 s－1;以及随机成核和随后生长型机理函数Am（Avrami-Erofeer）,其积分形式g(α)=[－ln(1－α)] 1/m和微分形式f(α)=m(1－α)•[－ln(1－α)](1－1/m),调节因子m=1.85～2.00.     

Features of a Scan and Clock Resource chip for providing access to board-level test functions

The architecture and some of the specific features of a Scan and Clock Resource (SCR) chip are described. This chip is currently being used in a high-end workstation product to provide access to the testability features of the individual chips and/or printed circuit boards. Using a board-level controller to gain access to the testability features of system components and interfacing the controller to a diagnostics processor (or external tester) is emerging as a common strategy for designing testable digital systems. Based upon experience gained from such an application, controller features that are deemed useful are discussed.This paper is an enhanced version of the author's earlier paper titled Towards a Standard Approach for Controlling Board-Level Test Functions, presented at the IEEE International Test Conference, ITC'90, Washington D.C., September 1990.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

The nearest neighbor random walk on subspaces of a vector space and rate of convergence

LetX be the collection ofk-dimensional subspaces of ann-dimensional vector spaceV _n overGF(q). A metric may be defined onX by letting

Initial data truncation for multivariate output of discrete-event simulations using the Kalman filter

Data truncation is a commonly accepted method of dealing with initialization bias in discrete-event simulation. An algorithm for determining the appropriate initial-data truncation point for multivariate output is proposed. The technique entails averaging across independent replications and estimating a steady-state output model in a state-space framework. A Bayesian technique called Multiple Model Adaptive Estimation (MMAE) is applied to compute a time varying estimate of the output's steady-state mean vector. This MMAE implementation features the use, in paralle, of a bank of Kalman filters. Each filter is constructed under a different assumption concerning the output's steady-state mean vector. One of the filters assumes that the steady-state mean vector is accurately reflected by an estimate, called the assumed steady-state mean vector, taken from the last half of the simulation data. As the filters process the output through the effective transient, this particular filter becomes more likely (in a Bayesian sense) to be the best filter to represent the data and the MMAE mean estimator is influenced increasingly towards the assumed steady-state mean vector. The estimated truncation point is selected when a norm of the MMAE mean vector estimate is within a small tolerance of the assumed steady-state mean vector. A Monte Carlo analysis using data from simulations of open and closed queueing models is used to evaluate the technique. The evaluation criteria include the ability to construct accurate and reliable confidence regions for the mean response vector based on the truncated sequences.     

基于自注意力机制和CycleGAN的高分三号ScanSAR图像的扇贝效应抑制

高分三号卫星是我国首颗分辨率达到1 m的C波段 多极化合成孔径雷达(synthetic aperture radar,SAR) 卫星,其中扫描 式合成孔径雷达(scan synthetic aperture radar,ScanSAR)模式是高分三号卫星重要的工 作模式之一,由于该模式的工作机制导致生成的图像可能发生扇贝效应,一般呈现为明暗相 间的条纹。本文针对高分三号卫星ScanSAR模式下存在的扇贝效应,提出自注意力机制与循 环一致对抗网络(cycle-consistent adversarial networks,CycleGAN)结合的模型对Scan S AR图像进行处理,从而抑制扇贝效应产生的条纹现象。本文所示方法与传统扇贝效应抑制方 法和深度学习相关算法进行比较,并通过亮度均值、平均梯度等指标进行分析。实验结果表 明,本文方法可以对高分三号ScanSAR图像存在的扇贝效应进行较好的处理,有效抑制图像 的条纹现象,使得图像质量得到提升,具有较大的实用意义。     

一种变压器巴伦馈电的超短波紧耦合阵列天线

紧耦合阵列天线(Tightly Coupled Array, TCA)具有超宽带、低剖面、宽角扫描等特点,近年来受到国内外学者的广泛关注。然而,在甚高频(VHF)、特高频(UHF)频段TCA 由于馈电网络设计困难等原因现有的研究报道很少。为了填补这一空白,本文设计并测试了一款变压器巴伦馈电的TCA,利用变压器巴伦解决了单元平衡馈电困难问题,同时采用短路枝节抑制E面共模谐振,采用频率选择表面(FSS)匹配层改善宽角扫描阻抗匹配。实测结果表明,该天线在110~520 MHz 频带内、±40°扫描角范围内电压驻波比<2.5,和仿真结果吻合。     

High-Efficiency Organic Solar Cells Enabled by Chalcogen Containing Branched Chain Engineering: Balancing Short-Circuit Current and Open-Circuit Voltage,Enhancing Fill Factor

The elaborate balance between the open-circuit voltage (V_OC) and the short-circuit current density (J_SC) is critical to ensure efficient organic solar cells (OSCs). Herein, the chalcogen containing branched chain engineering is employed to address this dilemma. Three novel nonfullerene acceptors (NFAs), named BTP-2O , BTP-O-S , and BTP-2S , featuring different peripheral chalcogen containing branched chains are synthesized. Compared with symmetric BTP-2O and BTP-2S grafting two alkoxy or alkylthio branched chains, the asymmetric BTP-O-S grafting one alkoxy and one alkylthio branched chains shows mediate absorption range, applicable miscibility, and favorable crystallinity. Benefiting from the enhanced π–π stacking and charge transport, an optimal power conversion efficiency (PCE) of 17.3% is obtained for the PM6: BTP-O-S -based devices, with a good balance between V_OC (0.912 V) and J_SC (24.5 mA cm⁻²), and a high fill factor (FF) of 0.775, which is much higher than those of BTP-2O (16.1%) and BTP-2S -based (16.4%) devices. Such a result represents one of the highest efficiencies among the binary OSCs with V_OC surpassing 0.9 V. Moreover, the BTP-O-S -based devices fabricated by using green solvent yield a satisfactory PCE of 17.1%. This work highlights the synergistic effect of alkoxy and alkylthio branched chains for high-performance OSCs by alleviating voltage loss and enhancing FF.