Interpretation of the Quantum Measurement: Example of a Linearly Coupled Harmonic Oscillator

We argue that it may be possible to consistently explain the quantum measurement by assuming that the wave function is in one-to-one correspondence with objective physical reality and has no probabilistic interpretation. In the context of such approach we consider the model of a harmonic oscillator linearly coupled to a heat bath and treat the oscillator as the system being measured. Three classes of initial pure states for the bath are considered. Exact expressions for the average values and variances of the oscillator coordinate and momentum as functions of time are considered for each class of pure states. It is shown that these quantities exhibit different asymptotic behavior for different classes of initial states of the bath. In particular, if each mode of the bath is initially in a coherent state, then for an arbitrary initial state of the oscillator the variances of the oscillator coordinate and momentum asymptotically approach the same values as for a coherent state of the free oscillator, while the averages of coordinate and momentum show a Brownian-like behavior. We argue that such behavior shows several features of the quantum measurement and supports our interpretation of the wave function.     

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

网络股泡沫大小测度研究

网络股泡沫是最能反映网络泡沫本质的表现形式，本文利用理性预期理论，构建了网络股泡沫大小的测度模型，说明网络股泡沫的存在，在此基础上确定了网络股泡沫大小的测度指标，并以雅虎公司股票为例对泡沫的大小进行了测度，结果符合网络泡沫的实际情况。     

Geometric quadrisection in linear time, with application to VLSI placement

We consider the following problem: given a set of points in the plane, each with a weight, and capacities of the four quadrants, assign each point to one of the quadrants such that the total weight of points assigned to a quadrant does not exceed its capacity, and the total distance is minimized.

This problem is most important in placement of VLSI circuits and is likely to have other applications. It is NP-hard, but the fractional relaxation always has an optimal solution which is “almost” integral. Hence for large instances, it suffices to solve the fractional relaxation. The main result of this paper is a linear-time algorithm for this relaxation. It is based on a structure theorem describing optimal solutions by so-called “American maps” and makes sophisticated use of binary search techniques and weighted median computations.

This algorithm is a main subroutine of a VLSI placement tool that is used for the design of many of the most complex chips.     

BEPCII直线加速器相控系统设计研究

为了补偿由于各种因素引起的微波相位漂移,BEPCII直线加速器需要建立微波相位反馈控制系统.能量最大法将用来确定每台功率源的最佳相位.沿直线加速器速调管长廊铺设相位稳定同轴线提供相位参考.现在已经完成了关键部件,如PAD单元、IfA 单元的开发.搭建了相控最小系统对系统进行了验证.     

机载海洋激光测深系统参量设计与最大探测深度能力分析

详细讨论了机载海洋激光测深系统最大测量深度与相关因子之间的关系，并利用最小可探测信噪比为判据，对机载海洋激光测深系统在白天和晚上工作进行了数值模拟，通过比较最大测量深度与激光脉冲峰值功率、接收视场角、接收口径和光谱接收带宽等关系，确定了系统的主要参量。以确定的参量建立的系统具有白天49m和晚上65m的最大测深能力，可完全满足在沿岸带以及岛礁的测量要求。     

光纤传感振动检测系统及其实验研究

实际工程结构中的振动检测是十分重要的，也是十分复杂的，常用的结构振动检测传感器易受工程现场恶劣环境的影响．而光纤传感器具有小巧、抗电磁干扰、灵敏度高、适合长期监测等优点。本文建立了基于马赫—曾德(Mech-Zehnder)干涉原理的光纤传感振动检测系统．研制了运用先进的数字信号处理技术采集和处理数据的专用软件，并在典型结构件——钢制悬臂梁结构上进行了外加信号作用下的强迫振动检测和冲击载荷作用下的自由衰减振动检测，测量了该结构件的频率及振幅，其结果与同时进行的成熟的电测结果相近，说明光纤传感器用于结构件的振动测量是可靠的。本文为光纤传感器应用于实际工程的振动检测提供了新的技术装置，具有工程应用前景。     

闪光照相条件下相对质量吸收系数的测量

 介绍了闪光照相中X光传播规律的等效单能模型。针对闪光照相出光重复性差、能谱测量困难的特点提出了相对质量吸收系数的概念。阐述了闪光照相中相对质量吸收系数的测量原理和方法。在闪光照相实验设备上采用整条D～L曲线对钨材料相对质量吸收系数进行了测量，得到的实验结果为1.23，与数值模拟结果1.26符合较好。     

位相连续变化型毫米波衍射天线的性能分析

报道了一种新型毫米波天线—衍射天线的测量结果．经分析讨论说明，这种天线具有良好的电性能．     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。