Modelling and optimal control of coupled structural acoustic systems with piezoelectric elements

We construct a model of a shell with piezoelectric elements (patches) that take into account the mutual influence of deformations and electric fields. Coupled problems for the shell with piezoelectric patches and an acoustic field, are studied and results on the existence and the uniqueness are obtained. For this system we consider an optimal control problem on noise attenuation and obtain results on the existence, the uniqueness, necessary and sufficient conditions of optimality. Copyright © 2003 John Wiley & Sons, Ltd.     

Feedback stabilization of snap-through buckling in a preloaded two-bar linkage with hysteresis

We study a linearly damped preloaded two-bar linkage that exhibits hysteresis due to the presence of multiple attracting equilibria. The dynamics at the unstable equilibrium, through which a snap-through buckle occurs, are not linearizable due to a solution-dependent singularity. We stabilize the unstable equilibrium using two distinct non-linear controllers. The feedback-linearization controller requires knowledge of the linkage parameters, whereas the robust version of the intrinsic non-linear proportional-derivative controller requires only an upper bound on the stiffness.     

Motion Control by ZV Shaper Synthesis Extended for Fractional Systems and Its Application to CRONE Control

Shaping command input or preshaping is used for reducing system oscillation in motion control. Desired systems inputs are altered so that the system finishes the requested move without residual oscillation. This technique, developed by N.C. Singer and W.P. Seering, is used for example in the aerospace field, in particular in flexible structure control. This paper presents the study of ZV shaper for explicit fractional derivative systems (generalized derivative systems). A robustness study of ZV shaper is then presented and applied to improve second generation CRONE control response time. Results from simulation and from a DC motor bench are also given.     

Passive control of the flow around a square cylinder using porous media

The passive control of bluff body flows using porous media is investigated by means of the penalization method. This method is used to create intermediate porous media between solid obstacles and the fluid in order to modify the boundary layer behaviour. The study covers a wide range of two‐dimensional flows from low transitional flow to fully established turbulence by direct numerical simulation of incompressible Navier–Stokes equations. A parametric study is performed to illustrate the effect of the porous layer permeability and thickness on the passive control. The numerical results reveal the ability of porous media to both regularize the flow and to reduce the drag forces up to 30%. Copyright © 2004 John Wiley & Sons, Ltd.     

Modification of Spatial Coherence by Means of Low-Order Zernike-Mode Adaptive Optics

Spatial coherence of the field modified by low-order adaptive optics is analyzed to establish a theoretical basis for the recent idea of using adaptive optics as a spatial coherence modifier. In this context low-order adaptive optics has the ability to correct some of the low-order aberrations specified by Zernike polynomials. The initial field to be modified is assumed to be a spatially partially coherent one resulting from phase disturbance. It is demonstrated, as in the previous study, that low-order adaptive optics serves to enhance the spatial coherence of the resultant field and that the effect of the enhancement becomes stronger as the spatial coherence of the initially partially coherent field increases. Potential applications of low-order adaptive optics as a spatial coherence modifier are briefly discussed.     

Electrode “edge effects” analyzed by the Green function method

An exact method based on Green's equation is used to find the diffusion-controlled faradaic current for certain electrode geometries that incorporate edges and vertices. Thereby the magnitudes of the time-independent current density associated with angled electrode/electrode and electrode/insulator junctions are calculated. As well, the square-root-of-time-dependent currents associated with vertices, receive attention. These terms extend to longer times, the Cottrell formulation appropriate for short times. Though most of the problems solved here have been tackled previously, the novel Green function approach is shown to be straightforward and intuitive.     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

Optimal control of the obstacle in a quasilinear elliptic variational inequality

In this paper we consider an obstacle control problem where the state satisfies a quasilinear elliptic variational inequality and the control function is the obstacle. The state is chosen to be close to the desire profile while the H² norms of the obstacle is not too large. Existence and necessary conditions for the optimal control are established.     

基于CH365型接口和MCX314As型运动控制器的PCI总线运动控制卡设计

以CH365型PCI总线接口和MCX314As型运动控制器为核心硬件,自主研发了基于运动控制器的PCI总线运动控制卡,该控制卡能够实现4轴位置、速度和S曲线的加减速控制,具有直线、圆弧、位模式插补功能及自动原位搜寻功能,同时具有4路信号输入和8路通用输出.     

Furtivity and Masking Problems in Time-Dependent Electromagnetic Obstacle Scattering

In this paper, we consider furtivity and masking problems in time-dependent three-dimensional electromagnetic obstacle scattering. That is, we propose a criterion based on a merit function to minimize or to mask the electromagnetic field scattered by a bounded obstacle when hit by an incoming electromagnetic field and, with respect to this criterion, we drive the optimal strategy. These problems are natural generalizations to the context of electromagnetic scattering of the furtivity problem in time-dependent acoustic obstacle scattering presented in Ref. 1. We propose mathematical models of the furtivity and masking time-dependent three-dimensional electromagnetic scattering problems that consist in optimal control problems for systems of partial differential equations derived from the Maxwell equations. These control problems are approached using the Pontryagin maximum principle. We formulate the first-order optimality conditions for the control problems considered as exterior problems defined outside the obstacle for systems of partial differential equations. Moreover, the first-order optimality conditions derived are solved numerically with a highly parallelizable numerical method based on a perturbative series of the type considered in Refs. 2–3. Finally, we assess and validate the mathematical models and the numerical method proposed analyzing the numerical results obtained with a parallel implementation of the numerical method in several experiments on test problems. Impressive speedup factors are obtained executing the algorithms on a parallel machine when the number of processors used in the computation ranges between 1 and 100. Some virtual reality applications and some animations relative to the numerical experiments can be found in the website http://www.econ.unian.it/recchioni/w10/.