INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Effect of selected dopants on conductivity and moisture stability of Li3PS4 sulfide solid electrolyte: a first-principles study

The first principle computational screening was performed to investigate the effect of selected dopants for Li₃PS₄ sulfide solid electrolyte on its ionic conductivity and stability toward moisture. The results suggest that substitution P⁵⁺ using isovalent cations whose electronegativity (EN) value is closer to the value of S has more significant effects on the ionic conductivity, whereby W⁵⁺ and Sb⁵⁺ can improve most. Similarly, aliovalent cation substitutions with compensating changes in the lithium-ion concentration, particularly those with a lower oxidation state and higher EN, such as Cu²⁺, effectively enhance the lithium-ion conductivity in this structure. For cation dopants, it is found that ionic conductivity improvement of Li₃PS₄ is the synergetic effect of EN and oxidation number of the dopant as well as the material's lattice parameter change. Oxides of the considered cation dopants can also improve the ionic conductivity of the material but have much lower lithium-ion conductivity than the cases of cation dopants. However, the metal oxide dopants, particularly those derived from soft Lewis' acid cations, show a marginal improvement in moisture stability of the Li₃PS₄ electrolyte. The effect of halides and metal halide dopants on the lithium-ion conductivity and moisture stability of Li₃PS₄ electrolyte are also studied. It is found that metal halides are more effective than any other dopants in improving the ionic conductivity of Li₃PS₄.     

Preparation of safe water–lipid mixed electrolytes for application in ion capacitor

Aqueous electrolytes are safe, economic, and environmentally friendly. However, they have a narrow potential window. On the other hand, organic electrolytes exhibit good thermodynamic stability but are inflammable and moisture sensitive. In this study, we prepared water–PEG–lipid ternary electrolytes(TEs). To combine the advantages of water, polyethylene glycol(PEG) and propylene carbonate(PC). The nonflammable mixed electrolytes exhibited a wide potential window of about 2.8 V due to the beneficial effects of PEG and PC. Using these TEs, a lithium manganate–active carbon ion capacitor could be operated at 2.4 V with an energy density of 32 Wh/kg, based on the total active electrode material(current density of 3.3 m A/cm~2). This value was significantly higher than that achieved using an aqueous electrolyte, thereby rationalizing the higher energy density.     

对集成电路封装塑封料湿敏性评定技术的探讨

在有关塑封料的湿度浸入研究中,湿气或者是穿过聚合物渗透,或者是沿着引线与密封树脂之间的界面渗透。本文主要是通过试验对与湿度渗透有关的新一代树脂的特性给予评定,并判定引线框架通路是如何影响湿度浸入的。     

Opto-thermal Moisture Content and Moisture Depth Profile Measurements in Organic Materials

Opto-thermal transient emission radiometry(OTTER) is a infrared remote sensing technique, which has been successfully used in in vivo skin moisture content and skin moisture depth profiling measurements. In present paper, we extend this moisture content measurement capability to analyze the moisture content of fruit (tomato. grape, etc. ) skins, and to study the relationship between fruits ripening process and their sur-face moisture and moisture depth profiles.     

Synthesis of silanized polyether urethane hybrid systems. Study of the curing process through hydrogen bonding interactions

Different types of silanized polyurethanes (SPUR) were prepared in two ways: the first type (a), by reacting a polyether diol with an isocyanatesilane and the second type (b) by reacting it with diisocyanate (IPDI) and afterwards with aminosilane. These systems are able to cure with atmospheric moisture and, as a consequence, a tridimensional hybrid structure is formed where the inorganic and organic phases are bonded with covalent bonds. The evolution of the curing process in both systems has been monitored by means of Fourier transform infrared spectroscopy, through the changes observed in the carbonyl stretching vibration region. The results obtained show that the SPURs of kind (b) present stronger hydrogen bonding interactions as a consequence of urea groups present in the final structure. Moreover, given the proximity of both urethane and urea groups to alkoxysilane end groups, during the alkoxysilane curing process these groups are forced to approximate themselves even further and therefore the reticulation process leads to an increase of the self association of urethane and urea groups.Finally, DSC has been used to measure T_g values of the systems studied before and after the curing process. The obtained results have confirmed the main conclusions obtained in FTIR analysis.     

The hydrolytic effect of moisture and hygrothermal aging on poly(butylene succinate)/organo-montmorillonite nanocomposites

The study of hydrolysis on biodegradable poly(butylene succinate) (PBS) is essential to predict the materials properties in a humid environment. In this study, PBS nanocomposites were exposed to different conditions of relative humidity (RH) and temperature. The moisture uptake increased with organo-montmorillonite (OMMT) loading and the RH of the testing environment. The exposure of PBS and the nanocomposites to a humid environment caused changes in the mechanical properties. The hydrolytic degradation becomes more pronounced upon hygrothermal aging at high temperature, whereby premature failure occurred. PBS nanocomposites were found to exhibit a better hydrolytic stability than neat PBS. The degradation was evaluated through Fourier transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC). A drastic reduction in the molecular weight of PBS has revealed the occurrence of degradation after exposure to moisture and heat. This has led to an alteration of the thermal behavior as investigated using differential scanning calorimetry (DSC).     

卡尔-费休滴定法测定有机锌盐药物中水分

采用卡尔-费休滴定法测定有机锌盐药物中水分时,改用甲醇-氨溶液(质量比180比1)作溶剂溶解试样。改进的溶剂利于有机锌盐药物的溶解及结晶水的释放。试验结果表明:有机锌盐药物中水分的测定值比药典法测定值高,相对标准偏差(n=5)在0.13%～0.36%之间。     

Kinetics of the production of chain-end groups and methanol from the depolymerization of cellulose during the ageing of paper/oil systems. Part 1: Standard wood kraft insulation

Recently, the existence of a relation between the rupture of 1,4-β-glycosidic bonds in the cellulose during thermal-ageing of paper/oil systems and the detection of methanol in the oil has been reported for the first time in this journal (Jalbert et al. 2007). The present study addresses the rate constants of the reaction for standard wood kraft papers, two immersed in inhibited naphthenic oil under air (paper/oil weight–volume ratio of 1:18) and one in non-inhibited paraffinic oil under nitrogen (paper/oil weight–volume ratio of 1:30). The isotherms in the range of 60–130 °C show that the initial rate of methanol production markedly increases with temperature and to a lesser extent with the moisture of the specimens (initially between 0.5 and 2.25% (w/w)), similarly to what is noted for the depolymerization through the Ekenstam’s pseudo-zero order model. The Arrhenius expression of the rate constants reveals linear relationships that confirm the dominance of a given mechanism in both cases. A very good agreement is also noted for the activation energy over the entirely paper/oil systems studied (106.9 ± 4.3 and 103.5 ± 3.7 kJ mol^?1 for methanol and scissions, respectively). Furthermore, a comparison of the rate constants $ \left( {k_{{{\text{CH}}_{ 3} {\text{OH}}}} /k_{\text{scissions}} } \right) Recently, the existence of a relation between the rupture of 1,4-β-glycosidic bonds in the cellulose during thermal-ageing of paper/oil systems and the detection of methanol in the oil has been reported for the first time in this journal (Jalbert et al. 2007). The present study addresses the rate constants of the reaction for standard wood kraft papers, two immersed in inhibited naphthenic oil under air (paper/oil weight–volume ratio of 1:18) and one in non-inhibited paraffinic oil under nitrogen (paper/oil weight–volume ratio of 1:30). The isotherms in the range of 60–130 °C show that the initial rate of methanol production markedly increases with temperature and to a lesser extent with the moisture of the specimens (initially between 0.5 and 2.25% (w/w)), similarly to what is noted for the depolymerization through the Ekenstam’s pseudo-zero order model. The Arrhenius expression of the rate constants reveals linear relationships that confirm the dominance of a given mechanism in both cases. A very good agreement is also noted for the activation energy over the entirely paper/oil systems studied (106.9 ± 4.3 and 103.5 ± 3.7 kJ mol⁻¹ for methanol and scissions, respectively). Furthermore, a comparison of the rate constants shows approximately constant values indicating an apparent yield for the methanol of about one-third molecule per every scission for the tests under air (0.27 ± 0.04 for Clupak HD75 and 0.37 ± 0.14 for Munksj? TH70) and even lower for the ones under N₂ (0.12 ± 0.03 for Munksj? E.G.). As expected from a pseudo-zero order model, these values were shown to be consistent with a similar comparison of the amount of CH₃OH and chain-end groups produced under specific time–temperature ageing conditions (168 h at 120 °C). Finally, an additional test carried out with unaged cellulose in contact with a fresh solution of methanol in oil (cellulose/oil weight–volume ratio of 1:18) shows that at equilibrium, over 58% of the species is lost from the solution due to penetration into the fibres. Such results reveal the importance of the species partitioning in establishing the true correspondence between the molecules of CH₃OH produced and the scissions.     

微电路封装产品内部水汽含量的分析与控制方法

为了使我所微电路封装产品能广泛满足航空、航天及其他特殊领域对内部水汽含量的要求(≤5000ppm),提出了降低金属或陶瓷结构封装的微电路封装产品内部水汽含量的控制方法和工艺要求。