基于Native Mode ATM API的应用系统模型及关键技术

ＡＴＭ技术作为Ｂ－ＩＳＤ的基础，在传输包括话音、图像、数据的综合业务环境中具有现有其它网络技术所不具备的技术优势，然而目前真正基于ＡＴＭＮａｔｉｖｅＭｏｄｅ的应用还很少，而大量基于Ｏｖｅｒｌａｙ Ｍｏｄｅ的ＡＴＭ应用不能充分发挥ＡＴＭ技术的优势。随着信息技术的发展，将会有大量的综合业务应用出现，它具有和传统数据通信安全不同的业务特性，必须通过一种灵活，高效的应用程序接口给予支持，本文提出基于Ｎａｔ     

低压铝箔交流腐蚀研究

在３０Ｈｚ频率下，通过铝箔在ＨＣｌ＋Ｈ２ＳＯ４＋ＨＮＯ３＋Ｈ３ＰＯ４体系中的交流腐蚀，研究腐蚀液组成中腐蚀主体及缓蚀剂对铝箔腐蚀的作用，探讨腐蚀过程中电源频率、腐蚀液温度、电流密度及腐蚀时间对铝箔腐蚀的影响。腐蚀液组成的配比恰当，有利于比容的提高。在特定的频率下采用合适的腐蚀液温度、适宜的电流密度和腐蚀时间可以提高铝箔的静电容量。     

利用网络技术实施财务集中控制

针对企业集团分权化管理的缺点，设计出一套利用互联网络技术实现企业集团财务集中控制的模式，给出了模式的图示及说明。     

空气比热容比实验的非绝热问题

通过一系列的实验数据分析，发现空气比热容比实验中非绝热现象不可以忽略．     

A computational strategy for multiscale systems with applications to Lorenz 96 model

Numerical schemes for systems with multiple spatio-temporal scales are investigated. The multiscale schemes use asymptotic results for this type of systems which guarantee the existence of an effective dynamics for some suitably defined modes varying slowly on the largest scales. The multiscale schemes are analyzed in general, then illustrated on a specific example of a moderately large deterministic system displaying chaotic behavior due to Lorenz. Issues like consistency, accuracy, and efficiency are discussed in detail. The role of possible hidden slow variables as well as additional effects arising on the diffusive time-scale are also investigated. As a byproduct we obtain a rather complete characterization of the effective dynamics in Lorenz model.     

Specific heat and related thermophysical properties of liquid Fe-Cu-Mo alloy

The specific heat and related thermophysical properties of liquid Fe77.5Cu13Mo9.5 monotectic alloy were investigated by an electromagnetic levitation drop calorimeter over a wide temperature range from 1482 to 1818 K. A maximum undercooling of 221 K (0.13 Tm) was achieved and the specific heat was determined as 44.71 J·mol-1·K-1. The excess specific heat, enthalpy change, entropy change and Gibbs free energy difference of this alloy were calculated on the basis of experimental results. It was found that the calculated results by traditional estimating methods can only describe the solidification process under low undercooling conditions. Only the experimental results can reflect the reality under high undercooling conditions. Meanwhile, the thermal diffusivity, thermal conductivity, and sound speed were derived from the present experimental results. Furthermore, the solidified microstructural morphology was examined, which consists of (Fe) and (Cu) phases. The calculated interface energy was applied to exploring the correlation between competitive nucleation and solidification microstructure within monotectic alloy.     

In－BiCaVIG的晶体生长与性能

本文报导了用助熔剂法成功地生长大尺寸掺铟ＢｉＣａＶＩＧ晶体的方法以及实验结果，介绍了该单晶在近红外区的磁光器件中的重要应用。     

双旋Y切石英振子厚度模式的频温特性的研究

本文利用描述固体中弹性声波的克里斯托费尔方程,建立了双旋Y切石英振子厚度模式的频温特性分析方法,并编制了相应的计算机程序。该程序可给出双旋Y切石英振子在任意切角(ф_3ф_1)下的厚度模(a、b、c模)的频率温度特性曲线。文中给出了单旋AT切、BT切(b模)、双旋SC切(b、c模)、FC切、IT切、LC切、NL_1切、NL_2切、AK切等各已知切型的频温特性曲线。对石英谐振器的切角灵敏度和切角误差进行了分析。     

Frequency domain measurements on Na2B4O7−V2O5 semiconducting glass

Summary Dielectric measurements on Na₂B₄O₇(99.5%)−V₂O₅(0.5%) glass system, in the frequency range 10⁻³ to 10⁴ Hz and temperature range 300 to 500 K, have been carried out. The normalized plots of complex capacitance have shown a single mechanism responsible for conduction for both volume and surface measurements with their close values of activation energies (0.67±0.03) eV and (0.64±0.03) eV, respectively. The low-frequency dispersion (LFD) behaviour has been observed to be perturbed by the presence of more than one competing process. The impedance plots have shown a parallel combination of a capacitor (C) and a resistor (R), with some contribution of a dispersive element due to charge accumulation in the vicinity of the electrodes. The values ofR andC were found to be of the same order of magnitude, for both surface and volume measurements. The observedR has shown a decrease with an increase in temperature due to an increase in mobility of Na⁺ ions, whereasC remains practicaly constant. The complex capacitance surface behaviour is dominated by volume, due to hygroscopy of this glass system.     

输入输出共轴的三弯曲型TM01-TE11模式转换器

 通过采用相位重匹配技术，设计了一种输入输出共轴的三弯曲型TM₀₁-TE₁₁模式转换器，该转换器由三段常曲率弯曲波导和两段直波导组成。用模式耦合理论建立了该类模式转换器的数值计算和优化设计方法，并设计了一个中心频率为7.0 GHz的模式转换器。该转换器的TM₀₁-TE₁₁转换效率在中心频率上大于99％，在6.5~7.5 GHz的频率范围内大于90％。应用时域有限差分法和有限元方法对所设计的模式转换器进行了仿真，仿真结果验证了设计理论和设计结果。