Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

Bioelectrochemical Magnetic Immunosensing of Trichloropyridinol: A Potential Insecticide Biomarker

A fast, simple and sensitive bioelectrochemical magnetic immunosensing method is developed to monitor a potential insecticide biomarker, trichloropyridinol (TCP), in environmental sample. A magnet/glassy carbon (MGC) working electrode was used to accumulate immunocomplex associated magnetic beads and separate free and unbound reagents after liquid phase competitive immunoreaction among TCP antibody coated magnetic beads, TCP analyte and horseradish peroxidase (HRP) labeled TCP. The activity of HRP tracers was monitored by square‐wave voltammetry (SWV) by scanning electrocactive enzymatic product in the presence of 3,3′,5,5′‐tetramethylbenzidine dihydrochloride and hydrogen peroxide (TMB‐H₂O₂) substrate solution. The electrochemical signal of enzymatic product was greatly enhanced by dual accumulation events: magnetic accumulation of enzyme tracers bound magnetic beads and constant potential accumulation of enzymatic product. The voltammetric characteristics of substrate and enzymatic product were investigated, and the parameters of SWV analysis and immunoassay were optimized. Under the optimal conditions the immunosensor was used to measure as low as 5 ng L^?1 (ppt) TCP, which is 50‐fold lower than the value indicated by the manufacture of the TCP RaPID Assay kit (0.25 μg/L, colorimetric detection). The performance of the developed immunosensing system was successfully evaluated with river water samples spiked with TCP, indicating this convenient and sensitive technique offers great promise for decentralized environmental application. This technique could be readily used for detection of other environmental contaminants by developing specific antibodies against the contaminants and are expected to open new opportunities for environmental monitoring and public health.     

Pulsed field gradient NMR on polybutylcyanoacrylate nanocapsules

The applicability of pulsed field gradient nuclear magnetic resonance spectroscopy to nanocapsule systems is demonstrated on dispersed poly-n-butylcyanoacrylate nanocapsules as a model system. Spectroscopic data are presented that allow for the structural characterization of the inner cavities, the observation of Brownian motion of the capsules and the detection of rapid molecular exchange through the capsule walls. An analytical formula is proposed that yields equilibrium populations and average residence times of a given tracer molecule, thus leading to crucial information regarding the permeability of the capsule walls. Based on these analytical methods, two varieties of nanocapsules are compared that derive from two different preparation procedures. It is found that thinner capsule walls obtained under acidic conditions of the organic phase during interfacial polymerization lead to correspondingly higher exchange rates of benzene as a tracer molecule.     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Two new tetranuclear complexes of the macrocyclic oxamide [MCu3] (M = Cd, Mn, macrocyclic oxamide = 1,4,8,11-tetraazacyclotradecanne-2,3-dione): syntheses, spectra and magnetic properties

Two new tetranuclear complexes of macrocyclic oxamide [Cd(CuL)₃](NO₃)₂·2.5H₂O 1, [Mn(CuL)₃(OH)₂](ClO₄)₂·Mn(H₂O)₆·4.5H₂O 2 (L = 1,4,8,11-tatraazacyclotradecanne-2,3-dione) have been synthesized, structurally characterized and preliminary investigated by magnetic studies. The structures of the title complexes consist of a tetranuclear units MCu₃ (M = Cd, Mn), the packing diagram shows two-dimensional and three-dimensional system through intermolecular weak interactions. The temperature-dependent magnetic susceptibilities of complex 2 were analyzed by an approximate treatment leading to J = −33 cm⁻¹, g_Cu = 2.10, g_Mn = 1.95 indicating antiferromagnetic exchange between Cu(II) and Mn(II) ions.     

Fouling and protein adsorption effect of low-temperature plasma treatment of membrane surfaces

Adsorption of proteins and the effect of the chemical nature of membrane surfaces on protein adsorption were investigated using¹⁴C-tagged albumin and several microporous membranes (polyvinilydene fluoride, PVDF; nylon; polypropylene, PP; and polycarbonate, PC). The membrane surfaces were modified by exposing them to low-temperature plasma of several different monomers (n-butane, oxygen, nitrogen alone or as mixtures) in a radiofrequency plasma reactor. Transients in the permeability of albumin solutions through the membranes and changes in flux of distilled water through the membranes before and after adsorption of albumin were used to investigate the role of protein adsorption on membrane fouling. The results show that the extent of adsorption of albumin on hydrophobic membranes was considerably more than that on hydrophilic membranes. The hydrophilic membranes were susceptible to electrostatic interactions and less prone to fouling. A pore-blocking model was successfully used to correlate the loss of water flux through pores of defined geometry