RE-B共掺杂片层TiO2的合成及其光催化性能

采用溶胶-凝胶法,利用钛酸四丁酯、硝酸镧、硝酸铈和硼酸为原料,对TiO₂光催化剂进行稀土-B(RE-B)的共掺杂改性制备和性能研究。采用X-射线衍射法(XRD)、冷场发射扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外-可见吸收(UV-Vis)光谱和荧光(PL)光谱对制得样品的相组成、表面形貌结构、表面元素组成、光响应范围及带隙能和电子-空穴的复合情况进行了初步分析。结果表明,所制掺杂TiO₂的组成均为锐钛矿型,掺杂使晶格发生了较大畸变,且细晶粒由未掺杂的27 nm减小到RE-B-TiO₂的10 nm,形貌为片层状不规则堆放状态存在。XPS结果表明掺杂元素有效进入二氧化钛, PL谱显示共掺杂可有效延长光催化剂的载流子寿命。掺杂后吸收边均红移, La-B-TiO₂由TiO₂的405 nm移动到466 nm,相应地禁带宽度减小了0.4 eV。光催化实验表明:2 h内降解亚甲基蓝(MB)时掺杂能够同时提高紫外和可见光下二氧化钛的光催化效率,而共掺杂的降解效果又优于单掺杂, La-B-TiO₂紫外光下的降解率达到80.67%,为同等条件下纯TiO₂的2.7倍,可见光下的降解率为74.78%。     

Fe3+掺杂TiO2/凹凸棒复合光催化剂的制备和光催化活性

用酸催化溶胶-凝胶法制备了Fe³⁺掺杂TiO₂/凹凸棒（Fe³⁺-TiO₂/ATP）复合光催化剂,对其结构、微观形貌、光吸收性能和可见光下的光催化性能进行了表征。XRD和TEM测试结果表明,Fe³⁺-TiO₂/ATP具有较好的热稳定性,经450 ℃热处理后的ATP晶体结构基本保持不变,锐钛矿TiO2均匀的分布在ATP表面,TiO2颗粒之间无团聚,且平均粒径小于纯TiO₂。UV-Vis-DRS测试结果表明,Fe³⁺的掺杂可明显增强复合光催化剂对可见光的吸收,光响应范围拓展到了整个紫外-可见光区。在可见光下,Fe³⁺-TiO₂/ATP复合光催化剂对亚甲基蓝具有很好的催化降解活性。Fe³⁺-TiO₂/ATP的反应速率常数分别为TiO₂/ATP、P25和纯TiO2的1.37、4.83和6.51倍。复合光催化剂的沉降性能优于纯TiO2和P25,易于分离。     

MB8镁合金的交流微弧氧化处理

在由氟化钾和氢氧化钾构成的碱性处理液中,采用交流微弧氧化处理技术对MB8镁合金进行了电化学表面处理研究,建立了膜层厚度与处理参数之间的关系模型,确定了膜层的组织构成,讨论了膜层生长机理,优化了MB8镁合金交流微弧氧化快速形成致密膜层技术参数。结果表明:人工神经网络技术可很好地建立膜层厚度与处理参数之间的关系模型;膜层主要由氟化镁和氧化镁构成,致密膜层的最大平均厚度范围为35～36μm,采用遗传算法优化并得到实验验证的可形成35μm厚致密膜层的交流微弧氧化快速成膜技术参数为:氟化钾浓度为1 182 g·L-1、氢氧化钾浓度为393 g·L-1、调压器输出电压为61 V、处理液温度为34℃、处理时间为116 s,该快速成膜速度较其它处理技术的成膜速度至少提高了7倍。     

镁合金抛光机理与CMP工艺研究

将化学机械抛光(CMP)技术引入到镁合金片(MB2)的抛光中,打破过去镁合金以单一化学或机械加工为主的加工手段,用自制的抛光液对镁合金片进行抛光实验。结果发现,抛光液中加入双氧水易产生胶体,不利于抛光的进行,因此提出无氧化剂SiO2碱性抛光。同时分析了镁合金的抛光机理,抛光中压力、转速和抛光液流量参数对抛光过程的影响,利用Olympus显微镜对抛光前后镁合金表面进行观察,通过合理控制工艺参数,能够得到较佳的镁合金抛光表面,远优于单一的机械加工,为镁合金抛光工艺和进一步研究抛光液的配比奠定了基础。     

Ultrasonic synthesis of α-MnO2 nanorods: An efficient catalytic conversion of refractory pollutant,methylene blue

In this work, uniform α-MnO₂ nanorods were synthesized via a simple hydrothermal followed by ultrasonication method using ultrasonic bath (20 kHz, 100 W) without using any surfactant and template. The crystallographic phases and surface morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transition electron microscopy (TEM) analysis, respectively. Functional group identification and chemical states of α-MnO₂ nanorods were confirmed by Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The as-synthesized uniform nanorods of α-MnO₂ exhibit excellent catalytic conversion of toxic organic contaminant (methylene blue (MB)) in the presence of NaBH₄ as reductant. The α-MnO₂ exhibits excellent stability up to four repeated catalytic cycles with nearly 92% conversion. The kinetic rate constant (k), and turnover frequency (TOF) were 0.736 min⁻¹ and 0.02 mmol mg⁻¹ min⁻¹, respectively. In addition, the fast electron transfer mechanism were investigated and discussed. These results open a new avenue for developing various metal oxide catalysts, which are expected to be very useful catalytic conversions.     

Determination of the electrochemical diffusion coefficient of methylene blue in SDS/n-C5H11OH/H2O system by non-probe microelectrode voltammetry

The diffusion coefficient of methylene blue (MB) is determined by the method of non-probe microelectrode voltammetry in sodium dodecyl sulfate (SDS)/n-C₅H₁₁OH/H₂O lyotropic liquid crystal system. The results obtained show that the diffusion coefficient of MB increases with water and n-pentanol contents in the microemulsions and the lyotropic liquid crystal but decreases with SDS content. The diffusion coefficient of SDS droplet in the microemulsions and the diffusion coefficient of SDS molecule in the lyotropic liquid crystal with MB all are less than those without MB. The magnitude order of the diffusion coefficient of MB is as follows: the coefficient in the oil-in-water (O/W) microemulsion is greater than the coefficient in the water-in-oil (W/O) microemulsion which is greater than the coefficient in the lamellar liquid crystal (LLC), which is also greater than the coefficient in the Hex.     

一种适合硬件实现的H.264/AVC宏块级码率控制算法

主要针对H.264/AVC编码器硬件实现时的特点,提出了一种适合硬件实现的高效码率控制方案。为了提高数据处理效率,硬件编码器通常采用Zigzag宏块编码顺序和宏块级流水结构,两者结合会产生复杂的数据依赖关系。在数据依赖存在的条件下,提出了利用时域和空域相关性预测帧级和宏块级平均绝对误差(MAD),提高预测精度获取合适的量化参数。实验结果显示与G012算法相比,该算法提高了MAD预测精度,平均PSNR提高了0.12 dB,解决了硬件实现时的数据依赖问题。     

A New Property of Conjugated Polymer PFP： Catalytic Degradation of Methylene Blue Aqueous Solution

A new property of conjugated polymer poly（furancarbinol-co-phenol）（PFP） was studied. The target copolymer was used as a catalyst after proper heating treatment. And dye methylene blue （MB） could be fully degraded and largely mineralized on PFP, under natural light or even in dark, in a few minutes. Furthermore, the catalytic activity could be preserved after several runs and the catalyst was readily separated. The effect of calcination temperature was also observed.     

家用中央空调室内显示控制面板的设计

针对家用中央空调的特点，介绍了一种以富士通MB89P133A单片机为核心，集显示和控制功能于一体的中央空调室内显示控制面板的设计方法。给出了系统结构、部分电路原理图及软件流程图。     

A CMOS Frequency Synthesizer Block for MB‐OFDM UWB Systems

A CMOS frequency synthesizer block for multi‐band orthogonal frequency division multiplexing ultra‐wideband systems is proposed. The proposed frequency synthesizer adopts a double‐conversion architecture for simplicity and to mitigate spur suppression requirements for out‐of‐band interferers in 2.4 and 5 GHz bands. Moreover, the frequency synthesizer can consist of the fewest nonlinear components, such as divide‐by‐Ns and a mixer with the proposed frequency plan, leading to the generation of less spurs. To evaluate the feasibility of the proposed idea, the frequency synthesizer block is implemented in 0.18‐µm CMOS technology. The measured sideband suppression ratio is about 32 dBc, and the phase noise is ‐105 dBc/Hz at an offset of 1 MHz. The fabricated chip consumes 17.6 mA from a 1.8 V supply, and the die‐area including pads is 0.9 × 1.1 mm².