EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

介质极性敏感膜的制备和性能研究

以交联壳聚糖膜为载体,芘为介质极性探针,制备并表征了一种介质极性敏感膜,研究了该膜对醇-水混合溶剂极性的响应行为.基于极性测定,对十二烷基硫酸钠(SDS)和十二烷基磺酸钠(SLS)水溶液中胶束的形成进行了检测.结果表明,该膜具有较好的可逆性和重现性,且制膜方法简单、快速.     

Colorimetric and ratiometric fluorescent detection of sulfite in water via cationic surfactant-promoted addition of sulfite to α,β-unsaturated ketone

Three fluorescent probes were constructed by incorporating an α,β-unsaturated ketone to a coumarin fluorophore. The selective addition of sulfite to the alkene of TSP assisted by cetyltrimethyl ammonium bromide (CTAB) micelle can be visualized by dramatic color and ratiometric fluorescence changes. In CTAB–PBS system, the fluorescence intensity ratio at 465 nm and 592 nm (I₄₆₅/I₅₉₂) and the absorbance ratio at 390 nm and 470 nm (A₃₉₀/A₄₇₀) were linearly proportional to sulfite concentration in the range of 0.5–150 μM, and the detection limit was 0.2 μM. Good selectivity and competition of TSP1 towards sulfite over several anions and biological thiols were acquired. Probe TSP1 was used to detect sulfite in three realistic samples (mineral water, sugar and white wine) with good recovery.     

Synthesis of 5-acetyloxazoles and 1,2-diketones from β-alkoxy-β-ketoenamides and their subsequent transformations

Lithiated alkoxyallenes, nitriles, and carboxylic acids have been employed as precursors in a three-component reaction leading to highly substituted β-alkoxy-β-ketoenamides. Upon treatment with trifluoroacetic acid, these enamides could be easily cyclized to 5-acetyloxazole derivatives. The synthesis is very flexible with respect to the substitution pattern at C-2 and C-4 of the oxazole core. A mechanistic suggestion for the oxazole formation is presented on the basis of (18)O-labeled compounds and their mass spectrometric analysis. In several cases, 1,2-diketones are formed as side products or even as major components. The acetyl moiety at C-5 of the oxazole derivatives can efficiently be converted into alkenyl or alkynyl moieties, which allows a multitude of subsequent reactions. Condensation reactions of the acetyl group provided the expected oxime or hydrazone. By applying a Fischer reaction, the phenylhydrazone could be transferred into an indole, which emphasizes the potential of 5-acetyloxazoles for the preparation of highly substituted (poly)heterocyclic systems. The alkynyl group at C-2 is prone to addition reactions, providing an enamine with interesting photophysical properties. Sonogashira couplings were performed with 5-alkynyl-substituted oxazoles, furnishing the expected aryl-substituted products. This alkynyl unit was employed for the preparation of a new, star-shaped trisoxazole derivative. The ability of this multivalent compound to form self-assembled monolayers between the basal plane of highly oriented pyrolytic graphite and 1-phenyloctane was demonstrated by scanning tunneling microscopy (STM). The star-shaped compound seems to prefer the C(3)-symmetric arrangement in this two-dimensional crystal. Two 1,2-diketones were smoothly converted into functionalized quinoxaline derivatives.     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

Time-resolved enzymatic determination of glucose using a fluorescent europium probe for hydrogen peroxide

An enzymatic assay for glucose based on the use of the fluorescent probe for hydrogen peroxide, europium(III) tetracycline (EuTc), is described. The weakly fluorescent EuTc and enzymatically generated H₂O₂ form a strongly fluorescent complex (EuTc–H₂O₂) whose fluorescence decay profile is significantly different. Since the decay time of EuTc–H₂O₂ is in the microseconds time domain, fluorescence can be detected in the time-resolved mode, thus enabling substantial reduction of background fluorescence. The scheme represents the first H₂O₂-based time-resolved fluorescence assay for glucose not requiring the presence of a peroxidase. The time-resolved assay (with a delay time of 60 s and using endpoint detection) enables glucose to be determined at levels as low as 2.2 mol L^–1, with a dynamic range of 2.2–100 mol L^–1. The method also was adapted to a kinetic assay in order to cover higher glucose levels (mmol L^–1 range). The latter was validated by analyzing spiked serum samples and gave a good linear relationship for glucose levels from 2.5 to 55.5 mmol L^–1. Noteworthy features of the assay include easy accessibility of the probe, large Stokes shift, a line-like fluorescence peaking at 616 nm, stability towards oxygen, a working pH of approximately 7, and its suitability for both kinetic and endpoint determination.     

Two-photon dual-channel fluorogenic probe for in situ imaging the mitochondrial H2S/viscosity in the brain of drosophila Parkinson’s disease model

H₂S is an essential gas signal molecule in cells, and viscosity is a key internal environmental parameter. Recent studies have shown that H₂S acts as a cytoarchitecture agent and gas transmitter in many tissues, e.g., as a regulator of neuroendocrine in the brain for mediating vascular tone in blood vessels. Mitochondrial viscosity is an important parameter for judging whether mitochondrial function is normal. It has been reported that oxidative stress and mitochondrial dysfunction are connected with Parkinson’s disease (PD), and the protective role of H₂S in PD models has been extensively demonstrated. Herein, Mito-HS, a new two-photon fluorescent probe was demonstrated to detect cross-talk between the two channels of mitochondrial viscosity and H₂S content. Moreover, this probe could detect the relative amount of and changes in mitochondrial H₂S in situ due to the reduced mitochondrial targeting ability after reaction with H₂S. The results show that H₂S in mitochondria is inversely related to viscosity. The PD model has a lower H₂S in mitochondria and a higher mitochondrial viscosity than did the normal. This result is important for our deep understanding of PD and its causes.     

Identification by Electron Probe Microbeam Analysis of Submicron Borides in Joints of Nickel Base Superalloys

The phases formed at the interface between an intermetallic (NiAl) and a nickel base superalloy joined by combustion synthesis were investigated, particularly the eutectic phases. Owing to their small size, the characterisation of these phases using a Castaings electron microprobe encounters difficulties. The analysis volume size is generally too large to differentiate the phases from their surrounding matrix, even by using low accelerating voltage. Moreover, the eutectic phases contain boron, which is difficult to characterise by EPMA. Independently of the phases shape, the characterisation can be solved by viewing this complex system as a surrounding matrix and a multi layer system. The results of these simulations revealed the presence of two categories of borides: the eutectic boride MM₂B₂ (M=Mo and M=Co, Cr) and the solid solution boride [Cr_1–x (Mo, W)_x]B.     

A selective fluorescent probe for La and Y based on calix[6]arene

A new fluorescent probe based on calix[6]arene functionalized with three naphthoic acid groups was synthesized and showed selective fluorescence enhancement in the presence of La³⁺ and Y³⁺. In addition, the fluorescence enhancement behaviors depended on the pH values of the solution.