Decomposition of EuPdIn and EuPtIn at high temperature and high pressure—formation of the hexagonal Laves phases EuPd0.72In1.28 and EuPt0.56In1.44

EuPd_0.72In_1.28 and EuPt_0.56In_1.44 were prepared under multianvil high-pressure (10.5 GPa) high-temperature (1500 and 1400 K) conditions from the precursor compounds EuPdIn and EuPtIn. They were investigated by X-ray diffraction on both powders and single crystals: MgZn₂-type, space group P6₃/mmc, a=578.7(1) pm, c=944.9(3) pm, wR2=0.0734, 263 F² values for EuPd_0.72In_1.28 and a=591.1(2) pm, c=933.8(2) pm, wR2=0.0853, 151 F² values for EuPt_0.56In_1.44 with 13 variable parameters per refinement. Both structures are built up from face- and corner-sharing tetrahedra of palladium (platinum) and indium atoms. The europium cations are located in cavities within the three-dimensional [Pd_0.72In_1.28] and [Pt_0.56In_1.44] networks. The 2a and 6 h positions of the tetrahedral networks show mixed Pd/In and Pt/In occupancy in EuPd_0.72In_1.28 and EuPt_0.56In_1.44, respectively. The crystal chemistry of these indides is briefly discussed.     

联二脲氧化生成偶氮二甲酰胺反应的钒催化机理

在钒催伦剂存在下，用氯酸钠氧化联二脲制成偶氮二甲酰胺，从钒催化剂的单晶培养和结构解析入手，通过反应动力学研究，用ＥＳＲ检测反应过程中四价钒的生成，用分光光度法（分别以钛钛试剂和硫氰酸铵为显色剂）确定了反应过程中三价钒的生成和变化情况，从而提出了可能的催化机理，还利用量化计算从热力学角度证实了所提出的包括四价钒铬离子歧化过程在内的钒催化机理的合理性。     

尼龙1010骤冷退火样品的晶体结构

尼龙1010的晶体结构属三斜晶系.作者最近导出了X射线衍射法(WAXD)测定尼龙1010结晶度的公式,进而考查了等温结晶时结晶温度T_C对结晶度X_C、晶粒尺寸L_(100)和氢键面相对衍射强度R的影响.发现X_C和L_(100)均随T_C升高而增大,达196℃后又减小;而R与T_C的关系则相反,呈线性降低.结晶速率快有利于分子链在垂直于氢键面的(100)晶面生长,但R值却降低了.本文利用WAXD考查了尼龙1010不同骤冷退火条件样品的晶体结构.     

Synthesis and crystal structure of a new one-dimensional system with end-to-end single dicyanamide bridges between nickel(II) centres

The complex [Ni(tn)₂{N(CN)₂}]ClO₄ (tn=trimethylenediamine) has been synthesized and the structure has been determined. The complex forms a one-dimensional chain structure via the bidentate bridging ligand dicyanamide. A two-dimensional networks is formed via interchain hydrogen bond interactions.     

Synthesis and Characterization of ChiralLiquid Crystal CMPPCDP

ＳｙｎｔｈｅｓｉｓａｎｄＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆＣｈｉｒａｌＬｉｑｕｉｄＣｒｙｓｔａｌＣＭＰＰＣＤＰＴＩＡＮＹａｎ－ｑｉｎｇ，ＺＨＡＯＹｉｎｇ－ｙｉｎｇ，ＳＵＦｅｎｇ－ｙｕａｎｄＴＡＮＧＸｉｎ－ｙｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔ...     

Crystal and Molecular Structures of Two Derivatives of 1, 3a, 5-Trisubstituted-3a ,4,5,11-Tetrahydro-1,2,4-Oxadiazolino[5,4-d] [1, 5]Benzothiazepine

The structures of two derivatives of the title compound [C24H22N2OS, Mr = 386. 5 for (1); C25H22N2O3S, Mr = 430. 5 for (2)] were determined by using X-ray single-crystal strcuture analysis method. The final discrepancies are R = 0. 071 and 0. 077, respectively, for the reflections measured on a four-circle diffractometer. The space group for compound (1) is P bca with a=1. 6639(4), b=2.0286(3), c= 1.1742(1) nm, V = 3. 964(1) nm3, F(000) = 1632 e, Z=8; and (2) belongs to P21/n space group, and the cell dimensions are a=1. 1115(4), b=0. 8932(7), c=2. 186(3) nm, β=97. 52 (1)°? V=2.151(4) nm3, F(000) = 904 e, Z=4.The molecular backbones are very similar, each is a tricyclic system. The central seven-membered ring is in a twisted-boat conformation, and is cis-fused to 1,2,4-oxa-diazolino ring, while the latter moiety is in an envelope form. There are conjugated but non-coplanar effects in each structure. All bond lengths and angles in the molecules are normally acceptable. The crystal structure on the whol     

SYNTHESIS OF LIQUID CRYSTALLINE POLYACRYLATES WITH THIOESTER AS BRIDGE-BOND

A new series of acrylates with the same mesogens containing thioester as bridge-bondwere synthesized, and the acrylates were characterized by H~1 NMR, IR and MS. Thepolymers were obtained by radical polymerization using AIBN as initiator. The monomersand polymers exhibit thermotropic-enantiotropic liquid crystalline behavior.     

4－（2－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Fe、Co、Ni

４－（２－氨基噻唑）－间苯二酚为柱前衍化剂液相色谱／电化学检测Ｆｅ、Ｃｏ、Ｎｉ格日勒，李惠梅，李南强，汪尔康（中国科学院长春应用化学研究所电分析化学开放实验室，北京大学化学系，长春，１３００２２）关键词液相色谱，Ｆｅ，Ｃｏ，Ｎｉ，４－（２－氨基噻唑）...     

Structure and Magnetic Properties of Ce3Ge0.66In4.34 and Ce11Ge4.74In5.26

New indides Ce₃Ge_0.66In_4.34 and Ce₁₁Ge_4.74In_5.26 were synthesized from the elements by arc‐melting and subsequent annealing at 870 K. Single crystals were grown through special annealing procedures in sealed tantalum tubes in a high‐frequency furnace. Both compounds were investigated on the basis of X‐ray powder and single crystal data: I4/mcm, La₃GeIn₄ type, a = 848.8(1), c = 1192.0(2) pm, Z = 4, wR2 = 0.0453, 499 F² values, 17 variables for Ce₃Ge_0.66In_4.34 and I4/mmm, Sm₁₁Ge₄In₆ type (ordered version of the Ho₁₁Ge₁₀ type), a = 1199.3(2), c = 1662.0(3) pm, wR2 = 0.0507, 1217 F² values, 41 variables for Ce₁₁Ge_4.74In_5.26. The Ce₃Ge_0.66In_4.34 structure shows a mixed Ge/In occupancy on the 4c Wyckoff position. This site is octahedrally coordinated by cerium atoms. These octahedra share all edges, leading to a three‐dimensional network. The latter is penetrated by a two‐dimensional indium substructure which consists of flattened tetrahedra at In–In distances of 291 and 300 pm. The Ce₁₁Ge_4.74In_5.26 structure contains three crystallographically independent germanium sites. The latter are coordinated by eight or nine cerium neighbors. These CN8 and CN9 polyhedra are condensed to a complex network which is penetrated by a three‐dimensional indium network with In–In distances of 301–314 pm. The 16m site shows a mixed In/Ge occupancy. Chemical bonding in both compounds is dominated by the p elements. Both ternaries studied exhibit localized magnetism due to the presence of Ce³⁺ ions. The compound Ce₃GeIn₄ remains paramagnetic down to 1.72 K, whereas Ce₁₁Ge₄In₆ orders ferromagnetically at T_C = 7.5 K.     

The crystallization characteristics of polypropylene and low ethylene content polypropylene copolymer with copolyesters

The crystallization characteristics of polypropylene (PP) and low ethylene content PP copolymers with and without nucleating agents were studied by differential scanning calorimetry (DSC). PP and PP copolymers was blended with three different kinds of co[poly(butylene terephthalate-p-oxybenzoate)] copolyesters, designated B28, B46, and B64, with the copolyester level varying from 5 to 15 wt.%. All samples were prepared by solution blending in hot xylene solvent at 50 °C. The crystallization behavior of samples was then studied by DSC. The results indicate that these three copolyesters accelerate the crystallization rate of PP and PP copolymers in a manner similar to that of a nucleating agent. The acceleration of crystallization rate was most pronounced in these blend systems with a maximum level at 5 wt.% of B28. The observed changes in crystallization behavior are explained by the effect of the composition and the amount of copolyester in the blends.