Antihypertensive Effect of Angiotensin‐Converting Enzyme Inhibitory Peptide Obtained from Hen Ovotransferrin

Angiotensin I‐converting enzyme (ACE) inhibitory peptide was isolated from the hen ovotransferrin hydrolysate using chymotryptic hydrolysis by two steps of reverse‐phase high‐performance liquid chromatography. The amino sequence of this novel peptide was identified as Lys‐Val‐Arg‐Glu‐Gly‐Thr‐Thr‐Tyr that inhibited ACE activity in vitro in a concentration‐dependent manner with an effective concentration (IC₅₀) of 102.8 μM. Also, this inhibition was identified as noncompetitive using the Lineweaver‐Burk plot. Moreover, the antihypertensive action of this novel peptide was investigated by an intravenous injection into spontaneously hypertensive rats (SHR). A dose‐dependent reduction of systolic blood pressure by this peptide was observed after 40 min of treatment and it decreased the blood pressure markedly at the maximal dose (1 nmol/mL/kg). The maximal blood pressure lowering activity of this peptide was calculated as 163% of captopril (10 pmol/mL/kg) that was used as positive control. In conclusion, the obtained data suggests that Lys‐Val‐Arg‐Glu‐Gly‐Thr‐Thr‐Tyr has an ability to inhibit ACE activity and decrease the systolic blood pressure in hypertensive animals.     

Crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline poly(epichlorohydrin) derivatives

We performed the crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline polyethers using peroxide‐type initiators with and without the addition of tertiary amine promoters. The crosslinking temperatures were chosen in the range of mesophase stability to allow the mesophase order to be frozen. The biphenyl derivatives, with a high isotropization temperature, were crosslinked to a large extent. This led to anisotropic thermosets. To crosslink naphthalene derivatives, amine promoters were needed, but degrees of crosslinking were lower, and anisotropic elastomers were obtained. Crosslinking processes were studied by differential scanning calorimetry, polarized optical microscopy, and Fourier transform infrared spectroscopy. The nature of the frozen mesophase was confirmed by X‐ray diffraction studies on mechanically oriented samples. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2237–2244, 2002     

Simultaneous densitometric determination of artemisinin, artemisinic acid and arteannuin-B in Artemisia annua using reversed-phase thin layer chromatography

A rapid and simple RP-TLC method for simultaneous quantification of pharmacologically important sesquiterpene artemisinin (AM) together with its precursors arteannuin-B (AB) and artemisinic acid (AA) in the inflorescence part of Artemisia annua plant has been developed. The RP-TLC of sesquiterpenes was performed on RP-18 F254 S thin-layer chromatographic plates by developing in mobile phase, containing 0.2% TFA in water/ACN (35:65, v/v). The densitometric determination of AM, AB and AA was carried out after derivatization with anisaldehyde reagent at 426 nm in absorption-reflectance mode.     

Organic molecular beam deposition of oligophenyls on Au111: A study by X-ray absorption spectroscopy.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy has been applied to reveal the molecular arrangement of ultrathin oligophenyl films [p-quaterphenyl (4P) and p-hexaphenyl (6P)] on Au(111). In the half-monolayer films the molecules lie flat on the surface but still have a considerable inter-ring twist of 30 degrees -40 degrees , similar to the gas-phase conformation. In the saturated monolayer film the second half of the molecules is side-tilted by an angle of less than 66 degrees with respect to the surface. This arrangement is already similar to that in bulk net planes of thicker films parallel to the surface, that is, the 4P(211) and 6P(21-3) planes, respectively.     

Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

Effective atom volumes for implicit solvent models: comparison between Voronoi volumes and minimum fluctuation volumes

An essential element of implicit solvent models, such as the generalized Born method, is a knowledge of the volume associated with the individual atoms of the solute. Two approaches for determining atomic volumes for the generalized Born model are described; one is based on Voronoi polyhedra and the other, on minimizing the fluctuations in the overall volume of the solute. Volumes to be used with various parameter sets for protein and nucleic acids in the CHARMM force field are determined from a large set of known structures. The volumes resulting from the two different approaches are compared with respect to various parameters, including the size and solvent accessibility of the structures from which they are determined. The question of whether to include hydrogens in the atomic representation of the solute volume is examined. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1857-1879, 2001     

The Employ of Multiple Voltammetric Pulses for the Study of the Adsorption of Bipyridilium Pesticides in River Sediment

The multiple square‐wave voltammetry (MSWV) allied to gold microelectrode (Au‐ME) was used to establish an electroanalytical procedure for the determination of the paraquat and diquat pesticides in river sediment samples. For both pesticides, two reduction peaks, at around ?0.70 V (peak 1) and around ?1.00 V vs. Ag/AgCl 3.00 mol L^?1 (peak 2), with profile of the totally reversible redox process, were observed. The experimental and voltammetric conditions showed that the best conditions to reduce paraquat and diquat were a pH of 6.0, a frequency of 250 s^?1, a scan increment 2 mV, a square‐wave amplitude of 50 mV and pulse number of 8 pulses of potential in each step of staircase of potential. Under such conditions, the detection limit of 0.044 μg L^?1 (0.044 ppb) and 0.360 μg L^?1 (0.360 ppb ) for peak 1 and peak 2 of paraquat and 0.159 μg L^?1 (0.159 ppb) and 0.533 μg L^?1 (0.533 ppb) for peak 1 and peak 2 of diquat, respectively, were obtained. These results are an order of magnitude of about two less than those obtained and published in the literature. Also, the electroanalytical procedure proposed was applied for the determination of adsorption isotherms of pesticides on river sediments samples collected from Mogi‐Guaçu River in Sao Paulo State, Brazil. The experimental data were fitted using the Langmuir and Freundlich isotherms models; and the results indicated low intensities of adsorption process of the pesticides in the samples employed with distribution coefficients (K_d) lower 5.0, and paraquat showed slightly higher affinity than diquat in the sediments. The increase in organic matter and organic carbon leads to an increase in the K_d values, and consequently an increase in the organic matter constant (K_OM) organic carbon constant (K_OC) values. All results demonstrated that isotherms “L” type in the Giles classification were obtained, indicating that sediments have a medium affinity for the pesticides, and no strong competition from the solvent used (in this case Na₂SO₄) for adsorption sites occurs.     

Evidence of a phase transition of RbHCO3 from high-resolution solid-state 13C and 87Rb NMR by comparison with KHCO3

A variable-temperature high-resolution 13C and 87Rb solid-state NMR study of powder rubidium hydrogencarbonate, RbHCO3, is presented for the first time. At ambient temperature, RbHCO3 is formed by centrosymmetric dimers linked by hydrogen bonds, but almost no information is available on this compound concerning proton disorder and the low-temperature phase. However, potassium hydrogencarbonate, KHCO3, which has an isomorphic structure for the high temperature phase, was well studied: it undergoes a non-ferroic, non-ferroelectric phase transition at Tc = 318 K between two monoclinic structures. The protons are disordered in an asymmetric double-well potential in the low-temperature phase, and the double-well potential becomes symmetric in the high-temperature phase. By comparison with recent solid-state NMR experimental results on KHCO3, we show that RbHCO3 undergoes a phase transition at Tc approximately 245 K, and give evidence that the proton dynamic disorder in both compounds is very similar.     

Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.