激光微焊接质量的模糊识别技术研究

讨论了激光微焊点焊接质量的模糊识别的概念，数学模型及其应用方法，并介绍了系统的硬件组成。     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

Studies on Three—electrode Semiconductor Lasers

Using the ray trace method,three-section semiconductor lasers are studied .An analytic expression of output power for the three-section semiconductor lasers is derived for the first time.Frome this expression,threshold condition is also obtained.     

柱形颗粒群直径分布的激光衍射测量技术

提出了用激光衍射功率谱方法测量柱形颗粒群直径分布的技术方法，解决了长颗粒随机排列时的功率谱探测，及数据快速优化方法等技术难题。此技术已地应用于由羊毛和化纤截成的柱形颗粒群直径分布的测量，实现结果证明了此技术的可行性和实用性。     

Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

轴端沟槽底部激光强化工艺参数优化研究

分析了选用不同激光能量密度对HT300进行表面强化处理时，材料表面呈现的四种状况；未相变硬化、相变硬化、表面微熔与表面熔凝的金相组织。根据工艺要求，选取相变硬化方法对轴端沟槽底表面进行处理。分析了工件激光处理方法并通过试验研究，寻找轴端沟槽底部激光强化工艺参数；激光功率（P）、光斑直径（D）及扫描速度（V）的优化组合。硬度测试及耐磨性能试验表明：激光相变处理和激光熔凝处理后轴端沟槽底部表面较表面感应淬火硬度分别提高7%和34%，绝对磨损体积分别下降了13%和25%。实践证实，对轴端沟槽底部激光相变硬化处理方法较其他表面处理方法工艺简单，加工工件符合技术要求，试验结果对零件表面处理提供了可靠依据。     

用激光散斑场检测药液内杂质含量分布

本文分析了利用散斑斑纹检测大输液药品杂质含量的机理，报道了检测大输液药品杂质的实例．     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

激光磁共振用于对NO_2分子的定量测量

本文叙述了采用CO激光磁共振方法对NO_2分子作定量测量,给出了激光磁共振信号幅度的数学表达式以及信号与分子浓度、激光功率等实验参数之间的依赖关系,实验结果与理论分析一致。     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.