Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

激光对生物分子的共振激发作用

在生物分子的“谐”和“非谐”振子势模型的基础上，用量子力学讨论了激光对生物分子的共振激作用；并用之对激光的生物激活、诱变机理的“共振吸收”定性理论作一解析分析。     

10W QCW operation of a proton implanted GaAlAs diode laser array

We report one thick layer of hard-baked photoresist mask.The laser array stripe pattern was defined by standard wet lithography.With this mask, a 10 W QCW(quasi-continuous wave) operation of a narrow proton implanted multiple stripe conventional single quantum well separate confinement heterostructure(SQW-SCH) GaAlAs diode laser array has been realized.These devices exhibit the lateral far-field radiation pattern of a phase-locked array of gain-guided semiconductor injection laser array. The twenty stripe laser array has a lateral far-field beam divergence full width at half maximum (FWHM) of less than 3°, and three twenty stripe laser array has a beam divergence in the plane of the junction of about 9°.     

水下成像的现状和发展动向

本文以下水成像在军事，海洋开发工程应用为基础，论述了水下观测和成像中采用微光电视摄像机和激光器件及其系统的技术现状和发展动向。     

封闭循环TEA CO2激光器用催化剂的实验研究

在不同的催化剂和不同温度的条件下,用磁氧分析仪监测了封离型TEA C0₂激光器中O₂含量随时间或脉冲次数的变化。对实验现象进行了分析。对几种催化剂的特性给出了详细的比较。     

毛细管凝胶电泳的激光光热在线检测

近年来,毛细管电泳已成为一种高效快速的微化学分离分析新技术,在无机、有机及生物化学分析中得到了广泛的应用.但毛细管的内径小,进样量在pg～ng级,给样品的检测带来新的困难.因此,发展高灵敏度的显微在线检测器,已成为毛细管电泳技术发展中的重要环节.基于各种原理的检测器研究已有报道~[1].Dovichi等曾用热透镜技术在线检测了乙腈/     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

正交试验法优化CS汽化吸附条件

通过正交试验设计,优化了影响西埃斯(CS)标准样品管制备的参数:汽化温度、采样流速、采样时间。结果表明,CS标准样品管的最佳吸附条件为汽化吸附温度:260℃,采样N2流速:330mL/min,采样时间:15min。在15~1500ng范围内,色谱峰面积与进样量有良好的线性关系,线性相关系数为0.9995,检出限为6.0ng。