光孤子源的研制

报道了利用增益开关分布反馈半导体激光器，Ｆ－Ｐ光学滤波器及掺饵光纤放大顺研制成光孤子源的研究工作。光孤子源性能稳定，输出的超短光脉冲重复频率为２．５ＧＨｚ脉宽２４，谱宽０．１４ｎｍ，时间带宽积０．４１９，平均输出光功率２．４ｍＷ。     

多孔硅（PS）制备新方法

介绍了两种制备多孔硅的方法：电火花刻蚀法和激光辐射腐蚀法。讨论了这两种新方法制备的多孔硅样品的结构和发光特性，同时，与电化学法制备的多孔硅的结构和发光特性进行了比较。最后指出这两种新方法对于多孔硅形成机理和发光机制研究是有所帮助的。     

IR LASER BACKSCATTERING FROM AN ARBITRARILY SHAPED DIELECTRIC OBJECT WITH ROUGH SURFACE

The backscattering of light wave from arbitrarily convex dielectric objects withrough surface is investigated and formulas for calculating the backscattering cross-section of bothcoherent and incoherent fields are obtained.In the infrared wave-band,the influence of the ge-ometry,permittivity and statistical characteristics of the rough surface on LRCS is analyzed,byusing rough sphere and ellipsoids as examples.     

闪光灯泵浦的Nd:KGd(WO4)2激光器

报道了用闪光灯泵浦的掺钕的钨酸钆镓(Nd³⁺:KGd(WO₄)₂激光器.在重复频率1Hz,脉宽120μs的灯泵下,测量了不同透过率下激光输出能量,获得最大输出能量384mJ,斜率效率1.0%,外推阈值0.54J.在调Q运行时,Nd:KGW晶体的斜率效率为0.16%,最大输出能量46mJ.     

生命科学中的激光技术

本文综述了激光技术在细胞生物学和临床医学中的新发展。     

高功率二极管泵浦固体激光技术和应用前景的分析

文章对高功率二极管泵浦固体激光器的若干关键技术，包括激光二极管和增益介质，泵浦，耦合和冷却技术，以及光学谐振腔等作了详细的分析。     

表面垂直裂痕诱发瑞利波散射的数值分析

激光激发的声表面波为材料表面缺陷的检测提供了有力的工具.针对含缺陷材料在模型边界上的复杂性,建立了基于平面应变的有限元模型并选取了相同厚度但含有不同深度的表面裂痕的单层铝板进行了对比计算,得到了声表面波经过不同深度的表面裂痕时产生的反射及透射信号波形的时域特征.进而引入了基于Wigner-Ville分布理论的时-频分析方法计算裂痕前、后散射的瞬态表面波的能量在时间-频率平面内分布的情形.结果显示：声表面波接近中心频率的某一频率成分在经过深度小于其中心波长的表面缺陷时,随着裂痕深度的增加,对应于该频率的反射系数呈现单调递增的趋势;而透射系数呈现递减的特征,这一结果可以为激光超声检测表面缺陷提供一种定量的表征手段.     

可用于激光核聚变的闪烁中子探测器

在当前激光核聚变实验中,中子集中在短时间内出现、且产额低。为适应这种特点,要求探测器的效率高,分辨时间短。利用闪烁中子探测器探测激光核聚变所产生的中子,能测定中子产额,记录中子能量,而且探测效率高,分辨时间短。缺点是易受γ射线、X射线的干扰。     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.