On the Exceptional Zeros of Rankin–Selberg L-Functions

The main objects of study in this article are two classes of Rankin–Selberg L-functions, namely L(s,f×g) and L(s, sym²(g)× sym²(g)), where f,g are newforms, holomorphic or of Maass type, on the upper half plane, and sym²(g) denotes the symmetric square lift of g to GL(3). We prove that in general, i.e., when these L-functions are not divisible by L-functions of quadratic characters (such divisibility happening rarely), they do not admit any LandauSiegel zeros. Such zeros, which are real and close to s=1, are highly mysterious and are not expected to occur. There are corollaries of our result, one of them being a strong lower bound for special value at s=1, which is of interest both geometrically and analytically. One also gets this way a good bound onthe norm of sym²(g).     

测量高功率激光的体吸收能量计

叙述了体吸收激光能量计的特点，介绍了其标定方法，给出了其技术参数。体吸收激光地的推广应用取得了广泛的社会效益。     

微波能在中药加工中的应用

阐述了微波能烘干、灭菌在中药加工中的实例和一系列优点。     

神光装置放大自发辐射输出特性测量

讨论了大型激光装置放大自发辐射输出的一般特性，给出了神光装置放大自发辐射特性的测量结果。     

Size distribution of fractured areas in one-dimensional systems

We study a one-dimensional model for fracture, identifying fractured areas with intervals on which a stress field exceeds a threshold value. When is a diffusion process, the cumulative numberN(l) of fractured areas whose length is greater thanl obeys a power lawCl ^–p asl0 with probability one. The exponentp and the constantC are determined. The exponentp agrees with the Hausdorff dimension of the end points of fractured areas, i.e., ^–1(). Even if is self-similar with parameterH>0, i.e.,(cx)– is equivalent toc ^H {(x)–} for anyc>0, the exponentp does not depend solely onH;p=H, where(0, 1/H) is another parameter characterizing. Non-diffusion processes are given whereN(l) does not follow a power law.     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

140 GHz回旋管高转换效率准光模式变换器设计研究（英文）

成功实现高转换效率的140 GHz TE22,6准光模式变换器原型设计。基于周期微扰原理设计Denisov辐射器,实现低边缘绕射的初级出射波束。针对三镜面光路系统,采用全矢物理光学积分作为主要计算手段,围绕主极化场分量进行三级相位修正面迭代优化,实现高出射高斯纯度的模式场转换,其中一级镜的修正有效改善了辐射器出射的不理想性。基于全矢数值仿真确认,相比原二次曲面原型设计,相位修正后的变换器系统的出射高斯纯度从92.7%提高到99.6%,结合98.8%以上的功率传递效率,实现了性能优越的高阶回旋管准光模式变换器原型设计。     

InPBi禁带下红外光致发光效率的Bi组分依赖研究

稀Bi半导体InPBi的光致发光（Photoluminescence, PL）主要来自缺陷能级跃迁过程,具有红外长波长、大线宽和高辐射强度等特点,因而引发广泛兴趣。针对InPBi的红外发光效率问题,本文研究了不同Bi组分InPBi的激发功率依赖红外PL光谱演化规律。实验发现,随着Bi组分增大,PL线型发生显著变化,导致发光波长总体红移;同时激发功率依赖的PL积分强度演化分析表明,发光效率随Bi组分先增大然后下降,在0.5%组分时发光效率达到峰值。发光效率增大一方面归因于Bi捕获空穴降低非辐射复合,另一方面来自Bi的表面活性剂效应;而高Bi组分引入过多缺陷从而抑制了Bi的优势,导致发光效率下降。这些结果或有助于理解InPBi的红外发射性能,表明InPBi具有红外光电子应用前景。     

差分无源器件的设计

在现代无线通信系统中,差分电路相比单端电路而言具有更强的抗干扰能力,因此受到了国内外学者的广泛关注。文章介绍了混合模散射参数、差分器件设计中常用的微带线和缝隙线及两种传输线之间的相互转化,并介绍了基于微带线和缝隙线转换结构的两种全差分带通滤波器。两种滤波器分别实现了多频段和宽带的差模传输特性以及宽带的共模抑制特性。文章还给出了差分耦合器、差分功分器和差分天线等差分器件的设计。仿真与实测结果吻合较好,验证了设计方法的正确性。