Crystallization of poly-p-oxybenzoate on mica

Thin film polymerization/crystallization of poly-4-oxybenzoate (P-4-OB) from melt or dilute solutions yields on mica cleavage surface an epitaxial overgrowth with crystal blocks oriented in 1 to 3 substrate directions rotated by 60°. The b and c crystal axes of P-4-OB lie in the mica cleavage plane, with the a axis being perpendicular to it. At higher polymerization temperatures a different type of P-4-OB orientation on mica was also observed: two P-4-temperatures a different type of P-4-OB orientation on mica was also observed: two P-4-OB phase I crystals, again with b- and c-axes lying parallel to mica cleavage plane, were oriented perpendicular to each other. There is a pronounced tendency of the relatively thick P-4-OB overgrowth to form complex crystal structures involving both phase I and II with different types of orientation on mica substrate. © 1996 John Wiley & Sons, Inc.     

Poly(terephthalic anhydride) single crystals: Morphology and crystal structure

Single crystals of poly(terephthalic anhydride) (PTA) have been grown using the confined thin film melt polymerization technique. Thin lamellae (ca. 50 Å) are found for low polymerization temperatures, with thick crystals forming for polymerization at 200°C. Shearing of the material shortly after the initiation of polymerization at 200°C yielded single crystal domains composed of fibrillar texture material; these samples gave [010] zone ED patterns complementing the [001] zone patterns from the unsheared CTFMP samples. A monoclinic, single chain, two repeat unit, unit cell (Pc11) is proposed based on four different electron diffraction zone patterns: a = 6.01 Å, b = 3.94₅ Å, c = 14.11 Å, α = 106.9°. Simulations, using the Cerius² program, of the corresponding molecular conformation, packing and electron diffraction (ED) patterns were performed; the ED simulations are in good agreement with the observed patterns. An R-factor of 0.23 is obtained based on a comparison of calculated and observed structure factors for the 39 independent ED reflections observed on the different zone patterns. © 1996 John Wiley & Sons, Inc.     

Chemical assays of end-groups displayed on the surface of poly(ethylene terephthalate) (PET) films and membranes by radiolabeling

Poly(ethylene terephthalate) (PET) films and track-etched microporous membranes naturally display, on their surfaces, reactive chain-ends, i.e. carboxyl and hydroxyl functions. These were assayed by suitable activation (reaction with carbodiimide and tosyl chloride, respectively), followed by coupling with ³H-lysine and liquid scintillation counting of the sample-associated radioactivity. Values ranging between 5 and 30 pmol/cm² (open surface) of labeled end-groups were obtained, depending on the physico-chemical nature of the samples. Basic hydrolysis enriched the PET films with both types of endings (15–25 pmol/cm²). Reduction of films with the NaBH₄-catechol complex in tetrahydrofuran enriched their surfaces with hydroxyl groups. However, this procedure was not readily applicable to the surface modification of membranes; we observed an erosion effect that was confirmed by scanning electron microscope analyses. In contrast with the reduction process, the oxidation with KMnO₄ in 1.2N H₂SO₄ could be easily applied to the modification of either films or membranes; their surfaces were significantly enriched with carboxyl groups (15–50 pmol/cm²). This surface modification strategy has been used for the covalent coupling of adhesive proteins on PET membranes developed as supports for cell cultivation.     

RIG型磁光薄膜的研究进展及应用

随着光通信技术与光子集成电路的发展,非互易性器件作为光通信系统中重要的组成部分得到了越来越广泛的研究与应用。基于磁光效应制成的磁光隔离器和环行器是目前应用最为广泛的非互易性器件,为了将非互易性器件整块集成在硅片上,需制备性能与块状磁光材料相当的磁光薄膜。在近红外通信波段(1 550 nm),以钇铁石榴石(Y₃Fe₅O₁₂,YIG)为代表的稀土铁石榴石(RIG)具备优良的磁光效应,是最具应用前景的磁光材料之一。研究发现,使用稀土离子对YIG薄膜进行掺杂可以有效改善其磁光性能,尤其是Bi³⁺和Ce³⁺掺杂的YIG表现出巨法拉第效应。本文首先介绍了法拉第效应原理,介绍了三种常见磁光薄膜的生长方法,回顾了近年来的主要研究成果,介绍了磁光薄膜在光隔离器和环行器中的应用,最后对磁光薄膜的未来发展趋势进行了展望。     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

汽车太阳膜的色度与光谱特性分析

通过用带计算机控制的WGS-9型色度测量系统、UV-Vis 8500型双光束紫外-可见分光光度计和WGD-4A型光栅光谱仪定量测量和分析了某品牌汽车太阳膜的色度和光谱特性。测量分析结果表明：低红外透过率和紫外透过率与高可见光透过率是一对矛盾体,在选择太阳膜时只能有所侧重。如要求较高可见光透过的同时要避免过多紫外线照射,那应选择主波长为587.3 nm(浅蓝)或522.1 nm(钻石绿)的太阳膜。如要求较高可见光透过同时要兼顾隔热节能的功能,那么应选用色度主波长为497.3 nm(宝石蓝)或507 nm(翡翠绿)的太阳膜。     

Optimization of the Physical,Optical and Mechanical Properties of Composite Edible Films of Gelatin,Whey Protein and Chitosan

The aim of this work was to evaluate the effect of the concentration of gelatin (G) (3–6 g), whey protein (W) (2.5–7.5 g) and chitosan (C) (0.5–2.5 g) on the physical, optical and mechanical properties of composite edible films (CEFs) using the response surface methodology (RSM), as well as optimizing the formulation for the packaging of foods. The results of the study were evaluated via first- and second-order multiple regression analysis to obtain the determination coefficient values with a good fit (R ˃ 0.90) for each of the response variables, except for the values of solubility and b*. The individual linear effect of the independent variables (the concentrations of gelatin, whey protein and chitosan) significantly affected (p ≤ 0.05) the water vapor permeability (WVP), strength and solubility of the edible films. The WVP of the edible films varied from 0.90 to 1.62 × 10⁻¹¹ g.m/Pa.s.m², the resistance to traction varied from 0.47 MPa to 3.03 MPa and the solubility varied from 51.06% to 87%. The optimized values indicated that the CEF prepared with a quantity of 4 g, 5 g and 3 g of gelatin, whey protein and chitosan, respectively, provided the CEF with a smooth, continuous and transparent surface, with L values that resulted in a light-yellow hue, a lower WVP, a maximum strength (resistance to traction) and a lower solubility. The results revealed that the optimized formulation of the CEF of G–W–C allowed a good validation of the prediction model and could be applied, in an effective manner, to the food packaging industry, which could help in mitigating the environmental issues associated with synthetic packaging materials.     

螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

Thin film photocatalysis for environmental remediation: A status review

This review accounts, various metal oxide and metal sulfide thin films available for photodegradation of several organic compounds. Due to difficulties in recycling and to avoid rigorous recollection of powder catalysts, the thin film catalyst are gaining rapid attention for photocatalytic applications. The semiconducting thin films are growing as promising photocatalyst for water treatment. This review focuses mainly on the photocatalytic activity of metal oxide thin films in terms of its stability, charge transport and absorption properties. Thin film photocatalyst provides the increased efficiency and cost reduction of device. Furthermore, this review summarizes some key factors regarding the enhancement in photocatalytic performance of thin films.     

薄板弯曲分析的节点积分高阶无网格法

采用高阶无网格法求解薄板弯曲问题,在已发展的线性曲率光顺方案的基础上,通过引入泰勒展开技术,建立了能够精确再现纯弯曲和线性弯曲模式的节点积分方法。与之相比,目前无网格薄板分析主要采用的节点积分方法仅能精确再现纯弯曲模式。数值结果表明,本文方法可精确通过纯弯曲和线性弯曲试验,且能得到光滑、无振荡的弯矩场。与标准的高斯积分方法和目前已存在的节点积分方法相比,本文方法在计算精度、效率以及弯矩分布等方面均展现出显著优势。