Polyfluorene derivatives pending iridium complexes: Improved optoelectronic properties by introducing D‐A units and altering pendent mode

To study influence of the donor(D)‐acceptor(A) units and pendent mode of phosphorescent moiety on the opto‐electronic properties for its resulting copolymers, two D‐A‐based polyfluorene derivatives ( P 1 and P 2) pending the red‐emitting iridium bi(phenylisoquilonato) (picolinato) [Ir(Piq)₂(pic)] unit and a polyfluorene derivative ( P 3) only pending Ir(Piq)₂(pic) unit were synthesized and characterized, in which the donor of carbazole, the acceptor of oxadiazole are grafted into the C‐9 position of fluorene, the Ir(Piq)₂(pic) unit is pended into either the C‐9 position for P 1 and P 3 or the end for P 2 of fluorene by unconjugated linkage, respectively. Their opto‐electronic properties were significantly influenced by the D‐A units and pendent mode of the Ir(Piq)₂(pic) unit. In the polymer light‐emitting devices with a configuration of ITO/PEDOT/polymers/LiF/Al, the P 1 showed best electroluminescent properties than the P 2 and P 3. The maximum current efficiency of 0.72 cd/A and the highest luminance of 1398 cd/m 2 were obtained in the P 1‐based device, which are 1.3 and 1.5 times higher than those in the P 2‐based device, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Multiplexed Determination of Amino‐Terminal Pro‐B‐Type Natriuretic Peptide and C‐Reactive Protein Cardiac Biomarkers in Human Serum at a Disposable Electrochemical Magnetoimmunosensor

A rapid magnetoimmunosensor for the simultaneous determination of two cardiac biomarkers, amino‐terminal pro‐B‐type natriuretic peptide (NT‐proBNP) and C‐reactive protein (CRP), in human serum is described. Specific capture antibodies were covalently immobilized onto carboxylic acid‐modified magnetic beads. The quantification of NT‐proBNP and CRP was performed by using indirect competitive and sandwich configurations, respectively, and horseradish peroxidase‐labeled tracers. The use of dual screen‐printed carbon electrodes allowed the achievement of simultaneous independent amperometric readout for each cardiac biomarker. The developed methodology showed very low limits of detection (0.47 ng mL^?1). An international standard for CRP serum spiked with NT‐proBNP was analyzed to evaluate the usefulness of the magnetoimmunosensor.     

A green-emitting α-substituted β-diketonate Tb3+ phosphor for ultraviolet LED-based solid-state lighting

The α-substituted β-diketonate [Ln(3Cl-acac)₃(H₂O)₂] [Ln = Tb, Gd] complexes (with 3Cl-acac^– being 3-chloro-2,4-pentanedionate) were characterized by elemental analysis, infrared, ultraviolet (UV)-visible and photoluminescence spectroscopies. For comparison purposes regarding photoluminescence, the well-known [Tb(acac)₃(H₂O)₂] complex was also synthesized. By considering the phosphorescence spectra of [Gd(3Cl-acac)₃(H₂O)₂], the effect of chloride replacement of hydrogen on the triplet state energy of the 3Cl-acac ligand was revealed. To support the interpretation and rationalization of the experimental results, Time-dependent DFT calculations were performed on Tb(3Cl-acac)₃(H₂O)₂. Additionally, the possibility of Tb(3Cl-acac)₃(H₂O)₂ to be used as potential green-emitting phosphor material for solid-sate light emitting diodes was evaluated. A prototype was successfully fabricated coating a near-UV LED (370 nm) with the Tb(3Cl-acac)₃(H₂O)₂ complex.     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

黄光类水滑石的制备、表面改性及应用

采用共沉淀法合成了荧光类水滑石材料,该材料在470 nm蓝光激发下可发出黄色荧光(557 nm),采用硅烷偶联剂对其进行表面改性,探讨了表面改性对黄光类水滑石的发光性能、结构及热稳定性的影响。将改性黄光类水滑石与GaN基蓝光芯片封装后制得了白光LED。研究结果表明,改性的黄光类水滑石是制作白光LED可供选用的黄色发光材料。本文成功地将低温一步法制备得到的金属有机配合物/无机纳米杂化材料应用于LED,拓展了LED用荧光粉的选用范围。     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802