CdCl2后处理的Mn掺杂钙钛矿纳米晶光学性能及其白光LED

Mn²⁺离子掺杂全无机钙钛矿(Mn²⁺∶CsPbX₃,X=Cl, Br)纳米晶(NCs)具有宽发射带、长斯托克斯位移和高量子产率等优势,在固态照明、光电探测和成像等领域有广阔应用前景。然而,目前Mn²⁺掺杂的钙钛矿晶体量子产率很难超过70%,如何改善发光效率,同时调控Mn离子发射中心成为构建高质量白光LED的关键。文章通过CdCl₂后处理技术,进行室温下阳离子交换,获得了高效发光的Cd²⁺和Mn²⁺共掺杂的CsPbCl₃纳米晶。Mn的发射波长可以从604 nm连续调控到624 nm,实现稳定的红光发射。Cd离子掺杂改善了Mn-Cl八面体的晶体场环境,使Mn衰减寿命提高到1.32 ms。此外,通过绿色CsPbBr₃纳米晶和蓝-橙双色Mn∶CsPb(ClBr)₃纳米晶构建了高显色指数的暖白光发光二极管(WLED),其流明效率达60 lm/W,显色指数超过85。     

基于积分宽度法测量发光二极管结温方法的研究

本文提出了一种基于光谱积分宽度法来测量发光二极管(light emitting diode, LED)结温的新方法,并进行了理论分析和实验研究。本方法主要分为光谱数据采集、定标函数的测定和结温测量三个过程。首先,为了测量成本的降低和精度的提高而采用在正常工作电流下采集LED光谱数据,并通过采用不同温度下的光谱积分宽度与选定的某一基准状态下的值逐差可得到线性度达0.99以上的定标函数,并通过此定标函数可实时测定任意状态下的结温。其次,为了比较本方法测量结温的精确性,分别对单色和白光LED采用本方法和业界主流的正向电压法,通过自行设计的基于积分宽度法结温测量系统和美国Mentor Graphics公司的T3Ster型仪器的测量结果进行比较,两种方法测出的结温最大偏差为2.1℃,在可接受的误差范围内。实验结果表明积分宽度法测结温具有高效便捷且低成本的的特点,具有一定的应用前景。     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

MAX6951型LED驱动器及其应用

MAX6950/6951是Maxim公司推出的串行接口LED显示驱动器,内部集成16进制译码器和亮度控制器.介绍MAX6951的结构特点、工作原理及与LPC2214型ARM微控制器配合使用的软硬件实现.     

汽车自动变速器示教板的设计

利用单片机控制发光二极管和光纤来模拟汽车自动变速器的油路、阀体及其故障现象，采用键盘和LED显示器进行人机交互，操作方便简单，软件成功地模拟自动变速器的核心技未——自动换档功能，使学生能够清晰地领会自动变速器的工作原理。     

多位LED串行显示电路设计与应用

74HC595A芯片具有串行输入、并行输出功能,利用该集成电路可设计多位LED(发光二极管)串行显示电路。文中介绍了利用该芯片设计的12位LED串行显示电路,详细说明了该电路的工作原理及编程思路,并给出了参考程序。该电路只占用单片机3根口线,较并行显示方式极大地节省了系统资源,已在实际系统中得到应用。     

薄板模具钢脉冲Nd:YAG激光熔凝试样 变形量的测量

在厚度为0.3～0.8 mm的5Cr4Mo3SiMnVAl(012Al)模具钢和Cr12MoV模具钢薄板上，采用脉冲Nd:YAG激光进行了激光熔凝实验，研究了工艺参数(脉冲宽度和脉冲频率)、材质和材料厚度对激光熔凝后试样厚度方向上最大变形量的影响。结果表明，激光熔凝薄板模具钢所引起的变形相当严重，其最大弯曲变形量与材料厚度为同一个数量级；随着脉冲频率的减少或脉冲宽度的增加或材料厚度的减少，试样厚度方向上的最大弯曲变形量增大；Cr12MoV钢试样厚度方向上的最大弯曲变形量比012Al钢的大。激光熔凝工艺参数、材料的热扩散情况和材料的热物性参数的不同是造成上述现象的主要原因。     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

浅析全彩LED显示屏功耗能效等级的划分

本文主要围绕全彩LED显示屏的功耗问题进行分析，着重讨论了显示屏节能标准制定过程中需要重视的几个问题，如标准视频源的选定、立体角的引用、亮度的科学测量、效率系数的计算，从而为制定LED显示屏功耗能效等级相关标准提供建议。