Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

TFT LCD的过压驱动技术探讨

过压驱动技术是提高液晶显示器响应速度的关键技术之一。文章分析了TN型TFT液晶显示的原理及影响响应时间的因素,探讨了过压驱动的原理和系统结构,对灰阶亮度上升和下降两种状态下的应用进行了说明。对液晶显示系统进行了实验分析以及响应时间的测量,结果表明通过过压驱动可以在很大程度上提高液晶显示器的响应时间,有效改善显示画面的动态模糊问题。在0℃的环境温度下,最大灰阶响应时间不超过80ms。     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

Controlled peak wavelength shift of Ca1−xSrx(SySe1−y):Eu phosphor for LED application

The highly efficient red-orange-yellow-emitting phosphor (Ca_1−xSr_x)(S_1−ySe_y):Eu²⁺ in combination with commercial green phosphor SrGa₂S₄:Eu²⁺ and blue LED are proposed for a three-band white LED. The luminescence mechanism and optimization parameters are discussed on the basis of proposed peak wavelength diagram.     

CdCl2后处理的Mn掺杂钙钛矿纳米晶光学性能及其白光LED

Mn²⁺离子掺杂全无机钙钛矿(Mn²⁺∶CsPbX₃,X=Cl, Br)纳米晶(NCs)具有宽发射带、长斯托克斯位移和高量子产率等优势,在固态照明、光电探测和成像等领域有广阔应用前景。然而,目前Mn²⁺掺杂的钙钛矿晶体量子产率很难超过70%,如何改善发光效率,同时调控Mn离子发射中心成为构建高质量白光LED的关键。文章通过CdCl₂后处理技术,进行室温下阳离子交换,获得了高效发光的Cd²⁺和Mn²⁺共掺杂的CsPbCl₃纳米晶。Mn的发射波长可以从604 nm连续调控到624 nm,实现稳定的红光发射。Cd离子掺杂改善了Mn-Cl八面体的晶体场环境,使Mn衰减寿命提高到1.32 ms。此外,通过绿色CsPbBr₃纳米晶和蓝-橙双色Mn∶CsPb(ClBr)₃纳米晶构建了高显色指数的暖白光发光二极管(WLED),其流明效率达60 lm/W,显色指数超过85。     

基于积分宽度法测量发光二极管结温方法的研究

本文提出了一种基于光谱积分宽度法来测量发光二极管(light emitting diode, LED)结温的新方法,并进行了理论分析和实验研究。本方法主要分为光谱数据采集、定标函数的测定和结温测量三个过程。首先,为了测量成本的降低和精度的提高而采用在正常工作电流下采集LED光谱数据,并通过采用不同温度下的光谱积分宽度与选定的某一基准状态下的值逐差可得到线性度达0.99以上的定标函数,并通过此定标函数可实时测定任意状态下的结温。其次,为了比较本方法测量结温的精确性,分别对单色和白光LED采用本方法和业界主流的正向电压法,通过自行设计的基于积分宽度法结温测量系统和美国Mentor Graphics公司的T3Ster型仪器的测量结果进行比较,两种方法测出的结温最大偏差为2.1℃,在可接受的误差范围内。实验结果表明积分宽度法测结温具有高效便捷且低成本的的特点,具有一定的应用前景。     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

MAX6951型LED驱动器及其应用

MAX6950/6951是Maxim公司推出的串行接口LED显示驱动器,内部集成16进制译码器和亮度控制器.介绍MAX6951的结构特点、工作原理及与LPC2214型ARM微控制器配合使用的软硬件实现.